Fintie EB0007X Wireless Keyboard User Manual

June 6, 2024
FINTIE

Fintie EB0007X Wireless Keyboard

Fintie EB0007X Wireless Keyboard Pairing Steps

  • Step 1. Switch On/Off to On to turn your keyboard on.
  • Step 2. Press the “Fn + C” keys together to enter pairing mode.
  • Step 3. Verify your device’s Bluetooth® settings are onSelect Settings > Bluetooth > On.
  • Step 4. Select “Pair new device”.
  • Step 5. Select “Fintie Keyboard” from your device’s list of available devices to complete pairing.
  • Step 6. The Bluetooth pairing indicator will turn off after your device has paired successfully.

Sleep Mode

The keyboard will enter sleep mode after being idle for 30 minutes. Press any key to wake the keyboard up. Wait up to 2 seconds for the keyboard to reconnect with the wireless devices before starting to type.

Charging Your Keyboard

  1. Plug the Type-C end of the charging cable into the keyboard and the other USB end into your preferred USB charger. (USB charger is not included.)
  2. When charging, the power indicator will turn red. Generally, it takes approximately 4 hours for a full charge. (Output: DC 5 V/500 mA.)

Package Contents

  • 1 x Keyboard
    1 x USB-C Charging Cable

  • 1 x User Manual

Specifications

  • Bluetooth Version BLE 5.0
  • Operating Range Up to 10 meters
  • Working Voltage 3.0-4.2 V
  • Working Current 1 mA
  • Charging Current 200 mA
  • Sleeping Current 0.01 mA
  • Re-connect Time Apx. 2 seconds
  • Stand-by Time 365 days
  • Charge Time ≤ 4 hours
  • Uninterrupted Work Time 400 hours
  • Lithium Battery Capacity 500 mAh
  • Frequency Band 2402 to 2480 MHz
  • Maximum Radio-frequency power 0 dBm

Product Overview

  1. Power indicator: Turns blue for 3 seconds.
    Bluetooth indicator: Flashes blue when pressing “Fn + C”.
    Caps Lock indicator: Blue light is on.

  2. Charging indicator: Red while charging. Green when fully charged.
    Low battery indicator: Flashes red when charging is required.

  3. Charging port: Only used for charging.

Keys and Function

Fintie EB0007X Wireless Keyboard FIG 2

Troubleshooting

If your device does not respond to the keyboard, try the following.

  1. On your wireless devices, navigate to “Settings > Connected Devices > Previously connected devices” and delete any entries for unused Bluetooth devices including “Fintie Keyboard”.
  2. Restart your device.
  3. Turn your keyboard off and back on.
  4. Forget and re-pair your keyboard.
  5. If your keyboard does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
  6. If your keyboard does not operate correctly after charging it, please contact your authorized retailer.

Safety Tips

  • Do not place heavy objects on the keyboard.
  • Do not dissemble the product.
  • Keep the product away from oils, chemicals, and organic liquids.
  • Use only a damp, soft cloth, like microfibre, to wipe the keyboard.
  • Dispose of the battery according to local laws.
  • Keep the product away from sharp objects.

For UK customers only

Recycling Your Old Electricals Is Easy!

Recycle your electrical and electronic devices for free at your local recycling centre. To find your nearest centre, visit www.recycle- more.co.uk and type in your postcode.

Why Recycle?

Unwanted electrical equipment is the UK’s fastest-growing type of waste.
Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause soil and water contamination–harming wildlife and also human health.
We’re proud to support your local authority in providing local recycling facilities for electrical equipment.
To remind you that old electrical equipment can be recycled, it is now marked with the crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with this symbol) in your bin.

What is WEEE?

The Waste Electrical or Electronic Equipment (WEEE) Directive requires countries to maximise separate collection and environmentally friendly processing of these items.

How Are We Helping?

In the UK, distributors including retailers must provide a system which allows all customers buying new electrical equipment the opportunity to recycle their old items free of charge. As a responsible retailer, we have met the requirements placed on us by financially supporting the national network of WEEE recycling centres established by local authorities. This is achieved through membership of the national Distributor Take-back Scheme (DTS).
To find more information on WEEE recycling and to locate your nearest recycling centre, please visit www.recycle-more.co.uk.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.

IC Caution

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals