ECOFLOW RIVER Plus Portable Power Station User Manual
- June 6, 2024
- ECOFLOW
Table of Contents
- ECOFLOW RIVER Plus Portable Power Station
- Glossary
- Product Safety Guidelines
- EcoFlow App Download Guide
- Features of the RIVER Plus
- LCD Display
- Protection and Error Information
- Connecting the Solar Panels
- Entry-Level UPS
- AC X-Boost Mode
- Technical Specifications
- How to Recharge RIVER Plus
- RIVER Plus FAQ
- What’s in the Box
- Documents / Resources
ECOFLOW RIVER Plus Portable Power Station
Glossary
The following terms are used in this document to indicate various levels of potential harm that may be caused by improper operation.
NOTICE The instructions, if not properly followed, may result in property
damage and minor physical damage.
CAUTION The instructions, if not properly followed, may result in
property damage and serious physical damage.
WARNING The instructions, if not properly followed, may result in
property damage, major accident and serious injury.
Product Safety Guidelines
Product Disclaimer
Read all safety tips, warning messages, terms of use and disclaimers
carefully. Refer to the terms of use and disclaimer at
https://ecoflow.com/pages/terms-of-use and
stickers on the product before use. Users take full responsibility for all
usage and operations. Familiarize yourself with the related regulations in
your area. You are solely responsible for being aware of all relevant
regulations and using EcoFlow products in a way that is compliant.
Product Use:
- DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries out in the rain or near a source of moisture. Moisture in the RIVER Plus could cause short circuits, component failure, fires or even explosions.
- Never use non-EcoFlow parts. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no re-sponsibiliies for any damage caused by the use of non-EcoFlow parts.
- Never install or remove other modules from the RIVER Plus when it is turned on. DO NOT plug or unplug oth-er modules when the power of the product is turned on, otherwise the power interface may be damaged.
- Using the product in environments above 140ºF (60°C) may cause fires or explosions. Using the product below -4ºF (-20°C) will severely affect the performance of the product. Allow the product to return to a normal operating temperature before using it.
- DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident during use.
- Never disassemble or puncture the product in any way. Otherwise, it may leak, catch on fire, or explode.
- DO NOT use the product if it was involved in a crash, accident, or a forceful jolt.
- If the product falls into the water during use, take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as de-scribed in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extin-guishing equipment in the following order: water or water mist, sand, fire blanket, dry powder fire extinguisher, and carbon dioxide fire extinguisher.
- DO NOT put the product in a microwave oven or in a pressurized container.
- DO NOT allow pins, wires, or other metal pieces to enter the RIVER Plus case, outlets, or controls. Metal piec-es may short circuit the product.
- Avoid collisions. DO NOT place heavy objects on top of the RIVER Plus.
- If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or the inability to charge.
Product Charging:
- Always use EcoFlow approved charging cables. EcoFlow does not take any responsibilities for any damages caused by using non-EcoFlow charging cables.
- DO NOT use RIVER series portable power station AC charging cables on DELTA series power stations. Eco-Flow takes no responsibilities for any damages caused by customers’ failure to follow instructions. Doing so will void the warranty.
- When charging, please place the product on the ground with no flammable or combustible materials around it. To prevent accidents, never leave the product unattended during charging.
- DO NOT charge the product immediately after a long or heavy load, because the device temperature may become too high. DO NOT charge the device until it cools down to room temperature.
Product Storage and Transportation:
- Keep the product out of the reach of children. If any child accidentally swallows any parts, please seek medical attention immediately.
- If a low-battery warning appears, charge the product before storing it. Otherwise, long-term storage may cause damage to the batteries in the product. Batteries in the product will enter hibernation mode if they are depleted and stored for a long time. Recharging the product can bring the battery out of hibernation.
- DO NOT place the product near a heat source, such as inside a car in direct sunlight, a fire source, or an operating stove.
- Store the product in dry environments. Please keep it away from water.
- Make sure no objects can fall on or around the product while it’s being stored.
- Never ship a product with a battery power level higher than 30%
Product Battery Disposal:
- Dispose of RIVER Plus in specific recycling boxes only after a complete discharge. Batteries are hazardous chemicals. Please strictly follow your local regulations regarding the battery disposal and recycling.
- Dispose of the product if it cannot be powered on after over-discharging.
Product Maintenance:
- Temperature for normal use and storage of this product is -4°F to 113°F (-20°C to 45°C) and temperature for optimal use and storage of this product is 68°F to 77°F (20°C to 25°C).
- If the product is not used for a long time, the battery life may be reduced.
- Discharge RIVER Plus to 30%, then charge to 85% every 3 months to keep the battery healthy.
Travel Notice:
Do not bring this product on flights.
EcoFlow App Download Guide
Download the EcoFlow App
Search for “EcoFlow” in Google Play Store or App Store to download the app.
You can also scan this QR code with your phone, or you can enter the down-load
link in your browser: https://ecoflow.com/pages/ecoflow-app
For more information, please follow the instructions in the app or on our official website www.ecoflow.com.
Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the
EcoFlow Term of Use and Privacy Policy, which you can access via the “About”
section of the “User” page on the EcoFlow App or on EcoFlow Official website
at https://ecoflow.com/pages/terms-of-use
and https://ecoflow.com/pages/privacy-policy .
Features of the RIVER Plus
- LCD Display
- USB-A Output Ports
- ON/OFF Button of LED Light
- IOT Reset Button (PRESS & HOLD 3s to reset Wi-Fi)
- USB-C 100W Output Port
- Power Button & LCD Display Screen ON/OFF & Power Indicator
- DC Output ON/OFF Button (Car Outlet, 2 DC 5521 Output Ports) & DC Output Indicator
- Fast Charge USB-A Output Port
- AC Power Button (PRESS for ON/OFF) & AC Output Indicator
- 3 AC Output Sockets (100-120V version) 2 AC Output Sockets (220-240V version)
- Ventilation Fan
- X-Stream Charging Input Port
- Overload Protection Switch
- Solar Charge/Car Charge Input Port
- Power Earth Screw
LCD Display
Displays various conditions of the product.
USB-A Output Ports
Charge a wide array of devices such as smart phones, tablet, GoPro, speakers,
or anything else that could be charged through USB-A Port. The USB-A output
icon will appear on the LCD display when a USB-A port is in use.
ON/OFF Button of LED Light
There’re three types of LED light: low light, strong light, and SOS rescue
signal flash. Press it once to turn on the low light; press it twice to turn
on the strong light; press it one more time to turn on the SOS rescue signal
flash; then press it again to turn off the LED light. Long press can turn off
the LED directly.
IOT Reset Button (PRESS & HOLD 3s to reset Wi-Fi)
When you first use IOT function or you are changing the network environment,
you need to press and hold IOT Reset button for 3 seconds to reset the Wi-Fi.
It can connect with the mobile phone, then reconfigure the wireless network
through the APP. When using the IOT mode, make sure the power station has
sufficient amount of power or is connected to a power source to keep IOT
standby.
USB-C 100W Output Port
Devices that charge through a USB-C port, such as a MacBook Pro, Android
phone, can be charged by the RIV-ER Plus USB-C port. The USB-C Output icon
will appear on LCD Display when the USB-C port is in use.
Power Button & LCD Display Screen ON/OFF Power Indicator
Press the system power button once to turn the RIVER Plus on. Press and hold
the system power button to turn the RIVER Plus off. When RIVER Plus is turned
on, the power indicator is in breathing mode, and the display is on; When the
RIVER Plus is running, you can switch on or off the display screen by pressing
the Power Button once. When RIVER Plus senses that any output port is in use,
the display will automatically light up. The RIVER Plus screen will enter into
the sleep mode after being in idle for more than 5 minutes, but the battery
will still be running. The system standby time is 2 hours by default. You can
set up the system standby time and screen standby time via the App.
DC Output Port (Car Outlet, 2 DC 5521 Output Ports) & DC Output Indicator
Press DC ON/OFF to turn on or off RIVER Plus DC power. The DC power button
controls the RIVER Plus’s car charger output and two direct currents (DC 5521)
outputs. The car charger output supports an output up to 10A, which is
sufficient to power most electrical appliances used in vehicles. When the DC
ON/OFF switch is on, the product will not shut down on its own until it runs
out of power.
Fast Charge USB-A Output Port
The USB-A output icon will appear on the LCD display when the port is in use.
Fast charge-enabled devices can be charged at a maximum speed of 28W. If your
device does not support fast charging, the device will charge in a normal
speed.
AC Power Button AC Output Indicator
The AC power button controls the AC output of the RIVER Plus. The AC power
needs to be turned on manually. To enable AC power, press the AC power button.
When AC power is not in use to charge a device, press the AC power button to
turn off the AC power. Make sure to unplug the power cord from the AC port.
When the AC power of the RIVER Plus is enabled, the AC indicator will light
up. If the AC power is not used for more than 12 hours, the AC ports will turn
off automatically.
3 AC Output Sockets (100-120V) / 2 AC Output Sockets (220-240V)
Charge devices that require a 220-240V (220-240V region)/100-120V (100-120V
region) wall charger such as laptops, TVs, refrigerators, vacuums, etc. The
X-Boost feature enables the built-in 600W inverter to support 600W to 1200W
devices by lowing their power required. This feature does not support all
electrical devices with higher power rating, please test to confirm before
use. It is not recommended to use the RIVER Plus to power heavy-duty devices
e.g., air conditioners, coffee machines, clothes dryer, electric camp stoves,
full size refrigera-tors, microwaves, mowers, ovens, washing machines etc.
Ventilation Fan
The fan prevents RIVER Plus from overheating. Please make sure nothing blocks
the vents at both ends of the RIVER Plus.
X-Stream Charging Input Port
Plug in the AC Charging Cable into the port and connect the AC Charging Cable
to an AC power source. The U.S. and Japanese version support 100Vac-120Vac
(50Hz/60Hz) / international version supports 220Vac-240Vac (50Hz/60Hz)
charging.
Overload Protection Switch
When the input current continuously exceeds 10A during a charge, the AC
charging port will trigger the overload protection (the Overload Protection
Switch button will automatically pop out). When the product is confirmed to be
normal, press the overload protection switch button to continue charging.
Solar Charge/Car Charge Input Port
Connect at most two 110W solar panels in parallel to recharge RIVER Plus.
RIVER Plus supports a solar input of 10-25Vdc, 200W, 12A Max. RIVER Plus
supports 12V car charge up to 8A. (Remember to start the engine when you
charge via car charge, otherwise, the car battery may be drained.) Do not use
the same cigaratte lighter port to charge other devices when recharging RIVER
Plus. The RIVER Plus outlets can still be used to charge your devices when the
RIVER Plus is recharging via car charge.
Power Earth Screw
For safety reasons, some eletrical appliances need to be grounded. The power
earth screw provides an option to get your RIVER Plus grounded using a
grounding cable.
LCD Display
Remaining Charge/Discharge Time
This number indicates the remaining charge / discharge time (mins).
Battery Level Indicator
Shows the remaining power. The icon rotates while charging. When remaining
power reaches 0%, the icon flashes to warn of low battery. Please charge RIVER
Plus immediately.
Battery Level Percentage
Shows the remaining power (%). If the display shows 0%, please charge RIVER
Plus immediately.
High Temperature Indicator
When the temperature of the RIVER Plus is too high, a high-temperature warning
icon appears on the screen. Please cool down the product before use.
Low Temperature Indicator
When the temperature of the RIVER Plus is too low, a low-temperature
warning icon appears on the screen. Please warm up the product properly before
use.
Fan Indicator
Shows the fan speed, which is controlled by RIVER Plus automatically.
Current Input
Shows the current input power of RIVER Plus in watts.
Current Output
Shows the current output power of RIVER Plus in watts.
Overload Warning
The overload icon appears along with a second icon indicating what part of the
RIVER Plus is in an overload condition.
Battery Indicator
Refers to the battery
Port Usage Indicators
j| Extra Battery Indicator| The Extra Battery icon will appear when
Extra Battery is connected to the main model.
---|---|---
k| AC Indicator
| The AC indicator icon will appear when the AC power button is turned on.
l| USB-A Indicator| ****
The USB-A output icon will appear on the LCD display when a USB-A port is in use.
m| USB-C Indicator| The USB-C output icon will appear on the LCD
display when a USB-C port is in use.
n| Car Power Output Indicator| The Car Power Output
icon will appear on the LCD display when a Car Output port is in use.
o| IOT Indicator| The icon will appear when the unit is connected
to the App.
p| UPS Indicator| When the SOC (State of Charge) is set in the
EcoFlow App, the UPS icon
will appear on the screen.
Protection and Error Information
The RIVER Plus display screen showcases different icons to indicate errors or prompts. Read the information below to understand the icons and what to do when they appear.
|
USB-A Overload Protection
| Icon(s): USB-A and OVERLOAD icons flash together. What to do: Disconnect
all electrical appliances and wait 10 seconds before connecting each appliance
again.
---|---|---
|
USB-C High-Temperature Protection
| Icon(s): USB-C and High-Temperature icons flash to- gether. What to do: Disconnect all electrical applianc- es and wait until RIVER Plus has cooled down before connecting each appliance back.
|
USB-C Overload Protection
| Icon(s): The USB-C icon and the OVERLOAD icon flash together.
What to do: Unplug the appliances, the unit will auto- matically resume operation after 10 seconds.
|
High-Temperature Recharging Protection
| Icon(s): Recharging Time, Battery Exclamation, and High-Temperature icons flash together.
What to do: This will happen especially when you recharge the RIVER Plus immediately after a heavy battery use.
Disconnect Charging Cables and all electrical appliances and wait until RIVER Plus has cooled down before plugging Charging Cable back in and recharging.
|
|
High-Temperature Discharging Protection
| Icon(s): Battery Exclamation and High-Temperature icons flash together.
What to do: Turn OFF System Power and let RIVER Plus
cool down before turning the System Power back on.
---|---|---
|
Low-Temperature Recharging Protection
| Icon(s): Recharging Time, Battery Exclamation, and Low-Temperature icons flash together.
What to do: Disconnect Charging Cables and all electrical appliances and place RIVER Plus in warmer place before plugging Charging Cable back in and recharging.
|
Low-Temperature Discharging Protection
| Icons(s): Battery Exclamation and Low-Temperature icons flash together.
What to do: Turn OFF System Power and place RIVER Plus in warmer place before turning the System Power
back on.
|
Overload
Recharging-protection
|
Icon(s): Recharging Time, Battery Exclamation, and OVERLOAD icons flash together.
What to do: Unplug the charging cables, restart the RIVER Plus, and plug back the charging cables back in.
|
Overload Discharging Protection
| Icon(s): Battery Exclamation and OVERLOAD icons flash together.
What to do: Disconnect all appliances, restart the RIVER Plus, and add each appliance back in in turn. Please note that electrical appliances must be operat- ed within rated power.
__**__**
|
Communication Failure between the Main Board and BMS
|
Icon(s): Exclamation icon flashes. What to do: Restart the RIVER Plus.
|
Light stays on
|
Icon(s): Exclamation icon flashes. What to do: Restart RIVER Plus.
|
Communication Failure between the Main Board and AC
|
Icon(s): AC icon flashes.
What to do: Restart the RIVER Plus.
|
Inverter Output Overload
| Icon(s): AC and OVERLOAD icons flash together. What to do: Turn off RIVER Plus. Unplug all applianc- es. Wait 10 seconds, turn System Power ON then AC Power ON and plug each appliance back in in turn. If the icons keep flashing, do not charge or discharge the unit. Please note that electrical appliances must be operated within rated power. (For more informa- tion about X-Boost function, go to P11.
|
Inverter High-Temperature Protection
| Icon(s): AC and High-Temperature icons flash togeth- er.
What to do: Turn off RIVER Plus and let it cool down. Then turn System Power On and AC Power On.
|
|
Inverter Low-Temperature Protection
| Icon(s): The AC and Low-Temperature icons flash together.
What to do: Turn off RIVER Plus, move RIVER Plus to a warmer place and wait for the inverter to warm up. Turn the AC Power off; the unit will automatically recover.
---|---|---
|
Fan Blockage
|
Icon(s): Fan icon flashes.
What to do: Turn the RIVER Plus off, carefully clean, and vacuum around the vents on both sidess of the product. Then turn the RIVER Plus on.
|
Car Charger Overload
| Icon(s): Car and OVERLOAD icons flash together. What to do: Restart RIVER Plus, make sure all elec- trical appliances are used within the specified power range.
|
Car Charger High-Tempera- ture Protection
|
Icon(s): Car and High-Temperature icons flash togeth- er.
What to do: Turn RIVER Plus off and let it cool down.
Turn System Power On then DC Power On.
Connecting the Solar Panels
The RIVER Plus can support a 10-25V DC input. When the input exceeds 25V, the RIVER Plus overvoltage protection will be activated. Overvoltage may damage the product. Users should read these instructions carefully because any incorrect use of solar panels that leads to product damage will void the EcoFlow warranty.
How to Recharge the RIVER Plus Using Solar Panels
For full step-by-step instructions about how to connect RIVER Plus with solar
panels, please refer to the Solar Panel User Guide.
Recommend Charging Method
Users can connect a solar panel as shown in Example 1. DO NOT attempt to
connect more than one solar panel in series.
- Connect the solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the RIVER Plus XT60 input port to charge the RIVER Plus. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in Example 2.
- If you want to connect 2 sets of solar panels, connect them with our solar MC4 parallel connection cable and connect the solar MC4 parallel connection cable to the MC4 to XT60 Solar Charging Cable. Then Connect the XT60 connector to the RIVER Plus XT60 input port to charge the device. The parallel connection cable is an op-tional accessory that is sold separately.
Note : The EcoFlow Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased separately. The charging methods below are with respect to using the EcoFlow 110W Solar Panel.
Charging Method 1
Charging Method 2: (Parallel Connection Only)
Charging Method 2: (Parallel Connection Only)
Users can buy their own third-party solar panels to power RIVER Plus, provided
that the solar panels have a standard MC4 connection and the voltage and
current (10-25V DC, 12A Max) comply with the specifications of RIVER Plus. The
third-party solar panels will be able to recharge RIVER Plus through the MC4
to XT60 cable. EcoFlow does not provide free repair services for any damage to
the power station caused by third-party products.
Entry-Level UPS
RIVER Plus Entry-level UPS Use Reminder
RIVER Plus X-Stream system supports an entry-level UPS function. You can use
the RIVER Plus AC socket while the RIVER Plus is connected to an AC power
source (your devices or appliances connected the RIVER Plus AC sock et will
get power from the AC power source, not the RIVER Plus battery). When the AC
power source loses power suddenly, the RIVER Plus will switch to provide power
to the devices and appliances connected to it in <30ms. This is considered as
an “entry-level” grade UPS function that does not support 0ms switching. Do
not connect devices with strict uninterrupted power supply requirements.
Perform multiple tests to confirm compatibility before connecting devices such
as data servers and workstations with RIVER Plus. EcoFlow will not be
responsible for any loss of data or equipment damages caused by customers’
failure in following the instruction. In accordance with the UL2743 standard,
the AC outlets of the RIVER Plus are in a double blade, ungrounded config-
uration, it is recommended to use the UPS function only for temporary
emergency usage rather than for long-term usage. DO NOT connect the RIVER Plus
to devices or electrical appliances with bare metal when charging to avoid the
risk of electric shock.
Entry-Level UPS User Guide
Users can connect the AC charging cable of RIVER Plus to an AC power source,
connect a device to RIVER Plus, and turn on the AC switch to automatically
enter the entry-level UPS mode. When the AC power source is cut off, power
will be supplied from the battery of RIVER Plus to power your device (as shown
below).* UPS is only applicable to electrical appliances below 600W. To avoid
an Overload condition, do not attempt to power any equipment drawing more than
600W of power. EcoFlow will not be responsible for any loss of data or
equipment damages caused by careless use or customers’ failure to follow the
instructions. Only one RIVER Plus can conduct the UPS function; the UPS
function is not available when more than one RIVER Plus is connected together.
Please follow the connection instructions below:
AC X-Boost Mode
With the built-in 600W inverter, you can use the X-Boost feature to power 600W-1200W appliances without the disruption caused by overload protection. Traditional inverters will overload when one electrical appliance with a higher rated power is connected. Meanwhile, RIVER Plus built-in inverter, which has the X-Boost feature, enables the powering of 600W-1200W electrical appliances. Please take note of the following when using X-Boost:
- The X-Boost mode is enabled by default. You can use the EcoFlow App to turn this function on/off.
- The X-Boost mode is not available in the following situations: the charging state and X-Boost mode off state.
- When using appliances with a rated power of 600W-1200W, please connect only one appliance. When connecting more than one electrical appliance, the change of voltage may affect the usage of other electrical devices.*
You may use electrical appliance with heating elements and a rated power between 600W-1200W, such as hair dryers and electric kettles. But the X-Boost mode is not applicable for all electrical devices. Some devic-es with a rated power of 600W-1200W that have strict voltage requirements are still not compatible. Please conduct a full test to confirm before usage. It is not recommended to use the RIVER Plus so charge heavy-du-ty devices, such as air conditioners, coffee machines, clothes dryer, electric camp stoves, full size refrigerators, microwaves, mowers, ovens, washing machines etc.
Technical Specifications
General Specs
- Net Weight 11.9 lbs (5.4kg)
- Dimensions 11.3 x 7.3 x 7.7 in (28.8 x 18.5 x 19.4 cm)
- Pack Capacity 360Wh (28.8V,12.5Ah)
- Single Cell Equivalent Capacity 100,000mAh @ 3.6V
- Testing and certification UL Standard, CE, FCC, RoHS, RCM
Outputs
- AC Output (x3) /(x2 International Version) Full Sine Wave 600W (Surge 1200W) total, 120Vac (50Hz/60Hz) / 230Vac (50Hz/60Hz)
- USB-A Output (x2) 5Vdc, 2.4A, 12W Max, per port
- USB-A Fast Charge (x1) 5Vdc, 9Vdc, 12Vdc, 2.4A, 28W Max
- USB-C Output (x1) 5Vdc, 9Vdc, 12Vdc, 15Vdc, 20Vdc, 5A, 100W Max
- Car Power Output (x1) 136W, 13.6Vdc, 10A Max
- DC5521 Output (x2) 13.6Vdc, 3A Max(per port)
Input
- AC Charge Input Voltage 100-120Vac (50Hz/60Hz) International Version 220-240Vac (50Hz/60Hz)
- AC Charge Input Power (Example 1)* X-Stream Charge 330W Max
- Solar Charge Input 200W, 10-25Vdc, 12A Max
- Car Charger (Example 2) 12Vdc 8A Max
Battery
- Cell Chemistry Lithium-ion
- Discharge Temperature* -4°F to 140°F (±5°F), -20°C to 60°C (±3°C)
- Charge Temperature* 32°F to 113°F (±5°F), 0 to 45°C (±3°C)
- Shelf Life 1 Year (after fully charging the device)
- Cycle Life 800 cycles to 80%+ capacity
How to Recharge RIVER Plus
RIVER Plus has an AC charging port and an XT60 charging port located on the side. RIVER Plus can be charged with a 12V car charger, solar panels, or with AC power.
Example 1:
Example 2:
Can RIVER Plus Power Devices and Charge at the Same Time?
Yes, RIVER Plus can power devices at the same time as charging.
RIVER Plus FAQ
How to Clean RIVER Plus?
RIVER Plus is a versatile, durable power station that can be used in many
types of applications. You can clean RIVER Plus using a dry, non-abrasive
cloth. Use detergent that is used for cleaning mobile phones and computer
screens if you need to clean RIVER Plus more thoroughly. DO NOT expose RIVER
Plus to excessive amounts of liquid, as doing so can damage the product or
result in injury.
How to Store RIVER Plus?
Store RIVER Plus in a dry and cool environment, away from any abrasive
objects. DO NOT store or place RIV-ER Plus near water. Please turn off the
RIVER Plus and store it within its recommended use and storage tem-perature
range. If you need to store the RIVER Plus for a long time, please discharge
the RIVER Plus to 30%, then charge it to 85% every 3 months.
How to Use RIVER Plus Safely?
Please use RIVER Plus in its recommended operating temperature range. Using
RIVER Plus out of the recom-mended operating temperature range may cause the
power station to exceed safe and effective working limits. RIVER Plus is not
waterproof. DO NOT immerse RIVER Plus in water. Doing so will void the
warranty. If RIVER Plus is used to power electrical devices with heating
elements for over 30 minutes, such as a haird-ryer, the power station may
enter a high-temperature protection mode. Please wait for about 1 hour before
charging the RIVER Plus, or using it to power devices again.
How to Upgrade RIVER Plus Firmware?
The firmware can be upgraded using the EcoFlow App. Turn on the RIVER Plus
before firmware upgrade. It is recommended that the RIVER Plus is connected to
an AC power source or has about 50% battery level when upgrading. Please do
not use RIVER Plus to recharge your appliances and devices during firmware
upgrade. For more details, please refer to “How to upgrade firmware” FAQ in
the EcoFlow App.
Is RIVER Extra Battery compatible with RIVER Plus?
No. RIVER Extra Battery is only compatible with RIVER power station. It does
not work with RIVER Plus power station. RIVER Plus Extra Battery is only
compatible with RIVER Plus power station. It does not work with RIVER power
station.
What’s in the Box
Documents / Resources
|
ECOFLOW RIVER Plus Portable Power
Station
[pdf] User Manual
RIVER Plus, Portable Power Station
---|---