Pratt Whitney HMU200-4G Airplane-Mounted Aircraft Data Acquisition and Health Monitoring Unit Instruction Manual

June 6, 2024
Pratt Whitney

Pratt Whitney HMU200-4G Airplane-Mounted Aircraft Data Acquisition and Health Monitoring

Pratt Whitney HMU200-4G Airplane-Mounted Aircraft Data Acquisition and
Health Monitoring Product

Pratt & Whitney

  • 400 Main Street
  • East Hartford, CT 06118
  • 860-565-9743 FAX: 860-755-5845
  • To: Cetecom, Inc.,
  • Re: PTCRB Project Request 59306
  • Date: 06/29/2017
  • Exhibit A7: User Manual for the eFAST product

WARNING – PROPRIETARY RIGHTS NOTICE This document is the property of Pratt & Whitney Corp. (“P&W”). You may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain TCCA, FAA or other government approval to do so, without P&W’s express written permission. Neither receipt nor possession of this document alone, from any source, constitutes such permission. Possession, use, copying or disclosure by anyone without P&W’s express written permission is not authorized and may result in criminal or civil liability. U.S. Export Classification: EAR ECCN 9E991

PRODUCT DESIGNATION

Manufacturer:| Collins Aerospace & Setrix 400 Main Street

East Hartford, CT 06118

---|---
Marketing Name:| eFASTTM (Enhanced, Flight-data, Acquisition, Storage & Transmission)
Part # / Rev:|
FCC ID:| 2AQWD-HMU200-4G
IC_ID:| 25562-HMU2004G

PRODUCT OVERVIEW

The Health Management Unit (HMU) is a multi-function LRU that is capable of recording full-flight data, performing aircraft/engine condition monitoring, generating reports based on recorded data and offloading the data and reports to a remote ground station. The HMU will be integrated with the aircraft’s avionics systems, including the ARINC 664 network, and will be reporting maintenance related data to the Onboard Maintenance System (OMS) and aircraft condition monitoring advisory/info messages to be displayed in the Crew Alerting System.
The fundamental function of the HMU is to acquire and record parameters as outlined in the requirements section of this document. Data can be collected from the ARINC 429 and ARINC 664 input ports to be stored in resident non- volatile memory. The user can program reports that will monitor data in real time and trigger at defined conditions to capture data into recordings.
The HMU mounts in the forward Avionics Bay. The mounting mechanism is of a tray containing two ARINC 600 style ratchet latches that secure the HMU. The HMU has physical interfaces to the Primary Avionics via ARINC 664 and A429 buses, the electrical system via two DC power buses and a battery bus, the landing gear system via a hardwire discrete, and the Aircraft Network Switch (ANS) via standard Ethernet interface.

External Components / Accessories

  1. Cellular Antenna
    • Laird Technologies Multi-band 3G/4G MicroSphere antenna (P/N: CFS69271-FSMAF)
    • The cellular antenna shall be installed within the Cargo Bay aft of Forward Avionics Bay, 105 inches away from the Wireless LAN antenna and orientated such that it radiates into the bay.
    • The cellular antenna shall be connected to SMA J4 port on front of eFAST by means of a coaxial cable with provided SMA connectors (straight SMA connectors)
  2. Wireless LAN Antenna
    • Sensor Systems VHF/WLA S65-8280-37 Blade antenna (P/N: S65-8280-37)
    • The wireless LAN antenna shall be installed below the body of the aircraft.
    • The wireless LAN antenna shall be connected to SMA J5 port on front of eFAST by means of a coaxial cable and provided lightning suppressor attachment.
  3. Wireless LAN Antenna Cable
    • Carlisle Interconnect Technologies, P/N: 311501
    • The minimum wireless LAN antenna cable length is 10 ft.
  4. Cellular Antenna CablePratt Whitney HMU200-4G Airplane-Mounted Aircraft Data Acquisition and Health Monitoring Fig4
    • Carlisle Interconnect Technologies, P/N: 311901
    • The minimum cellular antenna cable length is 10 ft.
  5. Minimum Attenuation for LAN and Cellular Antenna Cable
    • The minimum antenna cable length is 10 ft.
      Band Attenuation for Min Cable Len (10 ft)| dB
      ---|---
      LTE B12| 0.94 dB
      GSM 850 / UMTS V| 1.06 dB
      LTE B4| 1.62 dB
      GSM 1900 / UMTS II| 1.67 dB
      LTE B7| 1.90 dB
      2.4 GHz LAN| 1.07 dB
  6. Optional Wireless LAN Lightning Protector
    • Times Microwave Systems, Product Number: LP-WBX-NMP

FCC and ISED Cautionary Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals