Shenzhen Ranboda Technology XH-AT-047 Mark Android TV Box User Manual

Randa Technology XH-AT-047 Mark Android TV Box
User Manual

Getting Started

1.1.1 Power On/ Off and Sleep

1. Connect the box to the TV with HDMI cable, connect the box to the power adaptor, Connect mouse, air mouse or other input devices with a USB port
2. After the device and cable connections, the power led turn to blue.
3. After the device and cable are disconnected, Power LED turns off
4. Under power-on mode, press the remote control’s power button, the device is entering into sleep mode.
5. Under sleep mode, the device will be wake when you press the remote control’s power button,

1.1.2 Open applications
Use remote control’s arrow keys to choose the wanted program, click the OK button to open the selected program
1.1.3 Switch in the applications
Click “My Apps” to view recently used programs, click the program icon to switch applications arbitrarily
1.1.4 Close Applications
Click icon  * to view recently used programs, choose one of them by clicking and holding, drag it to a blank area to close the application

• This function only operated in the condition of Mouse mode
  1.1.5 Back To Home Screen
  Click the icon   to return to the home screen
  Click the icon   on the remote control to return to the home screen
  1.1.6 Read External Storage Data
  Read U Disk
  Insert U flash disk or removable hard disk into the USB port in the status of power on, an icon appears in the top left corner of the desktop, open “FileBrowser”, the identified USB(A:) will appear under “Local Disk”, U disk’s operation is available now

Read TF card
Insert TF card into the device in the status of power on, when the icon appears in the top left corner of the desktop, open “FileBrowser”, the identified External Storage Card will appear under “Local Disk”, TF card’s operation is available now

1.1.7 WIFI Function
Home Screen → SETTINGS→  Network →  Select”Wi-Fi” to open WIFI function Choose hotspot →  Input Password →  Connect to the network 1.1.8 Ethernet Function
Home Screen →  SETTINGS→  Network →  Select “Ethernet” to open Ethernet function Insert network cable, the network will be connected automatically 1.1.9 WLAN Hotspot
Operations on the box: Home Screen→ SETTINGS→ Other→ More→ Setting→ More…→ Portable hotspot→ Select “Portable Wi-Fi hotspot” Select “Set up Wi-Fi hotspot” to set up” Network SSID” Security””Password”parameters * Ensure connected to the wired network, the box can be used as wireless AP to support more wireless devices access in the family
1.1.10 The Step that how to reflash the box

1. Uncompress the downloaded firmware (ROM) to the root of an SD card(format your SD card first).
2. Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
3. Using a toothpick, insert into the AV port of Box, press, and hold the hidden button while plugging the power in. Do not release until you see the screen of Robert Logo.
4. The update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
5. When the system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement
Please make sure that the product is normally connected to the wifi network during use, and the contact voltage is good during use. In order to have a good experience of using the product, please keep at least 20 cm.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>