Godox LED6R Rechargeable LED Video Light User Guide
- June 6, 2024
- Godox
Table of Contents
RGB LED 6R
RGB LED Video Light
User Guide
Instruction Manual
Names of Parts
01. LED Beads
02. Diffusion
03. 1/4”Cold Shoe Mounting Base
04. Type-C USB Charging Port
05. Cold Shoe Slot
06. Cold Shoe Base| 07. Power Switch
08. Mode Selection Button
09. Adjustment Button
10. Light Effects Button
11. Display
---|---
What’s in the Box
Battery
- This flash unit has built-in 1800mAh Li-ion battery which is non-detachable.
- It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit.
- Charge the battery by using the 5V 2A charger.
Cautions:
- No over 24 hours’ continuous charging.
- Store in dry, cool, ventilated places.
- Do not put aside or into fire.
- Dead batteries should be disposed according to local regulations.
- Please charge the battery to approx. 70% before being placed for long time.
- If the battery had ceased using for over 3 months, please make a full recharge.
- It’s normal that the battery will be degraded after a period’s usage for the battery life limitation.
Operation
-
Light Setting
1.1 Power ON/OFF Please push the power switch onto ON to power on the light and the current parameters will be displayed. Push the power switch to OFF to power the light off.
1.2 Mode Selection: CCT Mode/Colorful Mode/Light Effects Mode
Long press the M button to switch different modes: displayed CCT means bicolor mode and HSI means colorful mode.
Press FX button to enter light effects mode. And the 13 categories modes and icons will be displayed.
1.3 Installation and Multi Usage
The light can be fixed on the equipment with cold shoe or hot shoe through its cold shoe mounting base. It can be fixed on the equipment with 1/4”sockets e.g. pan-tilt, tripod and light stand. With built-in magnet in its back, this light can be absorbed on the subjects with iron surface. And the three cold shoe sockets enable this light to be installed on the equipment with cold shoe mounting base.
-
CCT mode:
long-press the M button to choose this mode.
2.1 Short press the M button to choose the value to be adjusted.
2.2 Color
temperature adjustment: press the upper adjustment button to increase the
color temperature value while lower button to decrease. Short press the button
once and the color temperature value will changes in 100K. Long press the
button to adjust the value from 3200K to 6500K quickly.
2.3 Brightness adjustment: press the upper adjustment button to increase the brightness value while lower button to decrease. Short press the button once and the color temperature value will changes in 1%. Long press the button to adjust the value from 0 to 100% quickly. -
Colorful mode:
long press the M button to choose this mode.
3.1 Short press the M button to choose the value to be adjusted.
3.2 H hue adjustment: press the upper adjustment button to increase the hue value while lower button to decrease.
Short press the button once and the hue value will changes in 1°. Long press the button to adjust the value from 0 to 360° quickly.
3.3 S Saturation adjustment: press the upper adjustment button to increase the saturation value while lower button to decrease. Short press the button once and the
saturation value will changes in 1. Long press the button to adjust the value from 0 to 100 quickly.
3.4 Brightness adjustment: press the upper adjustment button to increase the brightness value while lower button to decrease. Short press the button once and the
brightness value will changes in 1%. Long press the button to adjust the value from 0 to 100% quickly. -
FX Light Effects Mode (13 categories)
4.1 Press the FX button to enter light effects modes. Then, short press the FX button to switch the 13 effects in recycle while long pressing to change them quickly. 4.2 There are 13 categories to be selected according to your demands.
| No. | Display | Light Effects |
|---|---|---|
| 1 | RGB Recycle | |
| 2 | Flash | |
| 3 | Laser | |
| 4 | Lightning | |
| 5 | Broken Bulb | |
| 6 | TV | |
| 7 | Candle | |
| 8 | Fire | |
| 9 | Firework | |
| 10 | Police Car | |
| 11 | Fire Truck | |
| 12 | Ambulance | |
| 13 | SOS |
Technical Data
| Model | LED6R |
|---|---|
| Built-in Lithium Battery | 1800mAh |
| Power Source of Charging | 5V/2A |
| Power | Max. 6W |
| Color Temperature Range | 3200K～6500K |
| 100% Illuminance(LUX)(0.5m)(≈) | 270 |
| CRI(≈) | 95 |
| Brightness Range | 0%~100% |
| Duration | 2H-10H |
| Working Environment Temperature | -10~40°C |
| Dimension | 776630 mm |
| Net Weight | 110g |
Maintenance
- Shut down the device immediately should abnormal operation be detected.
- Avoid sudden impacts and the product should be dedusted regularly.
- It is normal for the light beads to be warm when in use. Avoid continuous flashes if unnecessary.
- Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories.
- This product, except consumables, is supported with a one-year warranty. Lithium battery is supported with six months warranty.
- Unauthorized service will void the warranty.
- If the product had failures or was wetted, do not use it until it is repaired by professionals.
- Changes made to the specifications or designs may not be reflected in this manual.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!
| Product Information | Model | Product Code Number |
|---|---|---|
| Customer Information | Name | Contact Number |
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance
lnformation (see below for further information). Other products or accessories
(e.g. promotional items,giveaways and additional accessories attached,etc.)
are notincluded in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the
relevant Product Maintenancelnformation. The warranty period is calculated
from the day(purchase date) when the product is bought for the first time,And
the purchase date is considered as the date registered onthe warranty card
when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product
distributor or authorized service institutions. You can also contact the Godox
after-sale service call and we will offer you service. When applying for
maintenance service, you should provide valid wananty card. If you cannot
provide valid warranty card, we may offer you maintenance service once
confirmed that the product or accessory is involved in the maintenance scope,
but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in
the following cases:①. The product or accessory has expired its warranty
period;②. Breakage or damage caused by inappropriate usage, maintenance or
preservation, such as improper packing, improper usage, improper plugging
in/out external equipment, falling off or squeezing by external force,
contacting or exposing to the improper temperature, solvent, acid, base,
flooding and damp environments, etc;③. Breakage or damage caused by non-
authorized institution or staff in the process of installation, maintenance,
alternation, addition and detachment;④. The original identifying information
of product or accessory is modified, alternated, or removed;⑤. No valid
warranty card;⑥. Breakage or damage caused by using illegally authorized,
nonstandard or non-public released software;⑦. Breakage or damage caused by
force majeure or accident;⑧. Breakage or damage that could not be attributed
to the product itself. Once met these situations above, you should seek
solutions from the related responsible parties and Godox assumes no
responsibility. The damage caused by parts, accessories and software that
beyond the warranty period or scope is not included in our maintenance scope.
The normal discoloration, abrasion and consumption are not the breakage within
the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
Product Type
| Name| Maintenance Period(month)|
Warranty Service Type
---|---|---|---
Parts| Circuit Board|
12
| Customer sends the product to designated site
Battery|
3
| Customer sends the product to designated site
Electrical parts e.g. battery charger, power cord, sync cable, etc.|
12
| Customer sends the product to designated site
Other
Items| Flash tube, modelling lamp, lamp body, lamp cover, locking device,
package, etc.|
No
| Without warranty
Godox After-sale Service Call: 0755-29609320-8062
Forward
This RGB LED Video Light LED6R is a multifunctional RGB light with multicolor, dual-colour temperature, FX lights effects that can be wirelessly adjusted. Suitable for almost all shooting occasions e.g. live, makeup, portrait and product shooting, video and recording, etc. It can be used on-camera independently or in combination with easy operation and great portability.
Main Features
- Freely switch LED CCT mode, RGB recycle mode and FX light effects mode
- Easy to adjust color temperature, brightness and color saturation
- With a built-in lithium battery and the light can be charged through a Type-C USB port
- With magnetic absorbed function which enables the light can be absorbed onto the iron surface
- Can be used independently or in combination with cold shoe mounting base and slots
- Fashionable, easy operated and portable
Warning
As this product do not have a waterproof function, please take measures of
waterproof in a rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and
other similar materials. In certain circumstances, these materials may be
sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
As this product has a built-in lithium battery, do not disassemble, impact,
squeeze or put it into the fire. If serious bulge occurs, please do not use.
Do not use or store the product if the ambient temperature reads over the
range of -10°C to 40°C. Please charge the product with the included adapter
and correctly operate it within the defined voltage and working temperate
according to the instruction manual.
GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community,
Fuhai Street, Bao’an District, Shenzhen, China
Tel: +86-755-29609320(8062) Fax: +86-755-25723423
E-mail: godox@godox.com
Made in China 705-LED6R0-00
godox.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>