Shenzhen Ryderful Technology LA-053-36R2-2 Stage lights User Manual
- June 6, 2024
- Shenzhen Ryderful Technology
Table of Contents
Shenzhen Ryderful Technology LA-053-36R2-2 Stage lights
BEFORE YOU BEGIN
What Is Included
- 2 x 36W 36 RGB LED Par Lights
- 2 x Brackets
- 1 x Remote Controller
- 4 x Adjustment Knobs
- 1 x User Manual
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure
all the parts are in the package and are in good condition.
Claims
If the box or the contents (products and accessories) appear damaged from
shipping, or show signs of mishandling, notify the carrier immediately, and
contact Amazon customer support and request them for the new replacement.
Amazon customer support team sure will definitely help you with this. You may
contact Amazon customer support team on the below link:
https://www.amazon.com/gp/help/customer/contact-us If your order is urgent,
here are Amazon customer service phone numbers as well: U.S. and Canada:
1-866-216-1072
Disclaimer
We believe that the information contained in this manual is accurate in all
respects. However, We assume no responsibility and specifically disclaims any
and all liability to any party for any loss, damage or disruption caused by
any errors or omissions in this document, whether such errors or missions
result from negligence, accident or any other cause. We reserves the right to
revise the content of this document without any obligation to notify any
person or company of such revision, however, We has no obligation to make, and
does not commit to make, any such revisions.
Safety Notes
Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage and maintenance.
- Always connect the product to a grounded circuit to avoid the risk of electrocution.
- Always disconnect the product from the power source before cleaning or replacing the fuse.
- Avoid direct eye exposure to the light source while the product is on.
- Make sure the power cord is not crimped or damaged.
- Never disconnect the product from power cord by pulling or tugging on the cord.
- If mounting the product overhead, always secure to a fastening device using a safety cable.
- Make sure there are no flammable materials close to the product when operating.
- Do not touch the product’s housing when operating because it may be very hot
- Always make sure that the voltage of the outlet to which you’re connecting the product is within the range stated on the decal or rear panel of the product.
- The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
- Always install the product in a location with adequate ventilation, at least 20in / 50cm from adjacent surfaces.
- Be sure that no ventilation slots on the product’s housing are blocked.
- Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket.
- The maximum ambient temperature (Ta) is 104 °F /40 •c. Do not operate the product at higher temperatures.
- In the event of a serious operating problem, stop using the product immediately.
- Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the seller customer service.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document
INTRODUCTION
SETUP
AC Power
The 36W LED RGB Par Light has an auto-ranging power supply and it can work
with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the
product’s power requirements (circuit breaker, power outlet, and wiring), use
the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating
indicates the product’s average current draw under normal conditions.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The 36W LED RGB Par Light can be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Mounting Diagram
OPERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath
the display.
| Button | Function |
|---|---|
| < MENU> | Select an operation mode or back out of the current menu option |
| Scroll up the list of option or select a higher value | |
| < DOWN> | Scroll down the list of option or select a lower value |
| Activate a menu option or a |
selected value
Menu Map
| Mode | Display | Description |
|---|---|---|
| Red light | r_000-255 | Red |
| Green light | g_000-255 | Green |
| Blue light | b_000-255 | Blue |
| Auto Play | Auto | Auto Program |
Sound Activated
Mode
|
Sound
|
Up and Down to select the sensitivity
Sound Sensitivity
|
UoL_1-9
| Sound Sensitivity Adjustment(weak to
strong)
Background Color on Voice
|
bA_on
|
No light voice control
---|---|---
bA_oF
| Automatic color
change without voice control
Master/Slave
|
A001-A512
| Do not exceed
64pcs slave units
Static Colors
| Au01| Red
Au02| Green
Au03| Blue
Au04| Amber
Au05| Cyan
Au06| Rose Red
Au07| White
Hopping
|
FF-01-99
| Select auto program
speed(slow to fast)
Fade
Changing
|
CC01-99
| Select fade speed
(slow to fast)
Pulse
|
EE01-99
| Select auto program
speed(slow to fast)
Strobe Mode
|
F000-255
| Strobe speed (slow to fast)
OMX Connection:
Set the product in DMX mode/A001 to control with a DMX controller.
- Connect the product to a suitable power outlet
- Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
Master/ Slave Connection
- Set master product in any functions you like
- Set the slave product at “IP.01-IP.64” display, then connect a DMX cable from the DMX output of the master product to the DMX input socket on the slave product.
DMX Channel Modes, Assignments, and Values 6-Channel
| Channel | Function | Value | Description |
|---|
CH1
| Bright
Adjustment
|
0-255
|
0 to 100%
CH2| Red| 0-255| 0 to 100%
CH3| Green| 0-255| 0 to 100%
CH4| Blue| 0-255| 0 to 100%
CH5
|
Strobe
| 0-9| No function
10-255| Fast to slow
CH6
| No Function| 0-50
Hopping| 51-100
Fade| 101-150
Pulse| 151-200
Auto| 201-250
Sound| 251-255
Note: CH1 is the brightness adjustment for CH2-6.
Remote Operation
Fade or Pulse mode
Icon
| Button
Function
| Display on
Panel
| Function
Description
---|---|---|---
1
| ****
ON/OFF
| | Press this button to turn on or off
the light
2
| ****
OMX Mode
| ****
A001
| Press this button to run OMX or
Master/Slave
3
| ****
Auto Mode
| ****
Auto
| Press this button
to run auto mode
4
| ****
Hopping Mode
| ****
FF01-99
| Press+/- to adjust hopping
speed
---|---|---|---
5
| ****
Fade Mode
| ****
CC01-99
| ****
press+/- to adjust fade speed
6
| ****
Strobe Mode
| ****
F0-255
| Press+/- to
adjust strobe rate
7
| ****
Sound-Active Mode
| ****
Uol 1-9
| Press+/- to
adjust the sensitivity
8
| ****
Red
| ****
Au 1
| press this button
for Red
9
| ****
Green
| ****
Au2
| press this button
for Green
10
| ****
Blue
| ****
Au 3
| press this button
for Blue
11
| ****
Rose
| ****
Au 6
| press this button for Rose
12
| ****
Amber
| ****
Au4
| press this button
for Amber
---|---|---|---
13| ****
Cyan
| ****
Au 5
| press this button
for Cyan
14| ****
White
| ****
Au 7
| press this button
for White
15
| ****
Speed-
| | press this button for change static colors/adjust
sensitivity sound
16
| ****
Speed+
| | press this button for change static colors/adjust
sensitivity sound
TECHNICAL SPECIFICATIONS
- DMX Channels: 6
- DMX Connectors: 3-pin
- Light Source: (LED): total 36W, 1W x 36 LED
- Beam Angle: 25°
- Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
- Power and Current: 28 W, 0. 42 A @ 110-240V, 50-60Hz
- Weight: 1. 54Ib/0. 7kg
- Product Size: 7. 28 x 7. 28 x 3. 35 in (18. 518. 58. 5 cm)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>