Shenzhen Qizhilian Technology Z1 Wireless HDMI Adapter Instruction Manual
- June 6, 2024
- Shenzhen Qizhilian Technology
Table of Contents
Z1 Wireless HDMI Adapter
Wireless HDMI adapter Manual
V1.0 ReceiverRXconnection method
Picture 1
1. Insert the HD cable in the accessory into the HD port of the receiver
(RX), and connect the other end HD cable input port of the large screen
display terminal (TV or other equipment) 2. Insert the Type-C port of the
power cable in the accessory into the power supply port of the receiver (RX),
and plug the other end into the adapter or USB power supply portVoltage 5V/1A
3. Adjust the HD signal source of the TV to the corresponding HD port until
the receiver’s startup screen displays and the startup is successful.
Transmitter (RX) connection method
Picture2
1. Insert the transmitter (TX) HD cable into the computer HD output port.
After waiting for ten seconds, you can project the laptop screen to the big
screen and complete the projectionPlease ensure that the computer is fully
charged
2. If the computer’s power supply is insufficient or the HD port cannot be
powered, please connect as
follows:
Picture 2
3. Plug the transmitter’s power supply into the adapter or USB power port
(voltage 5V/1A), and then the transmitter’s HD interface. 2.Insert the HD
interface of the laptop, wait for ten seconds to transfer the screen
projection of the laptop to the big screen
Picture3connection succeeded
TransmitterTX- Receiver (RX) Device pairing instructions
Note: This product is one-to-one pairing OK when it leaves the factoryThis
step is to prevent improper operation or other emergencies during the use of
the customer, causing pairing to fail, and then to restore and re-pair the
device.
Picture4
1. The receiver is connected to the screen and the standby interface is
displayed. 2. Insert the HD cable of the transmitter into the HD port behind
the receiver, use the tool to press and hold the button on the bottom of the
receiver for more than 3 seconds, and wait for the receiver to enter the
pairing mode 3.Prompt on the interfaceRelease the button to pair with EZCast
TX Press and hold the button
on the transmitter for more than 3 seconds. The TX indicator is always on to
indicate a successful connection
Steps to directly connect the phone to the screen
Android system 1.Open phone settingsAll sharecast /SmartView/Multi-
screen/Mirorring ……2.Search RX-XXXX device and connect.
Different brand mobile phone/tablet wireless projection function setting path
Huawei:Drop-down menu-Multi-screen Xiaomi:Set up-Connect and share-Cast
Samsung:Drop-down menu-SmartView…….
iOS system connection
1. Click WiFi on the phone settings page, find the hotspot of RX-XXXX and
connectE.g: RX-XXXXEnter password:*****
R X -XXXX
Swipe the screen to enter the Apple device control center, click Screen mirroring,Check “RX-XXXX”
RX-XXXX
Be careful when using wireless HD transmission equipment
BecarefulwhenusingwirelessHDtransmissionequipment.
Donotuseandoperatethisdeviceduringastorm.
Donotplacethedeviceinahumidandhightemperatureenvironmentforalongtime.
Donotdisassembleorrepairthisequipmentprivately.
$
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>