Shenzhen Shunsihang Keji Youxiangongsi AT001BF BlueFire Wireless Endoscope User Manual
- June 6, 2024
- Shenzhen Shunsihang Keji Youxiangongsi
Table of Contents
Shenzhen Shunsihang Keji Youxiangongsi AT001BF BlueFire Wireless Endoscope
User Manual
Specifications:
| LED Light | 6 pcs Adjustable |
|---|---|
| Transmission distance | 15 meters(without any obstacles) |
| Horizontal view angle | 60 degree |
| System | Android / iOS |
| Camera Resolution | 1920×1080,1280×720, 640×480 |
| Best Focal Distance | 1-4 inch(zoom able focus) |
| Power Capacity | 1800mAh built-in Li-Ion battery |
| Working voltage | DC 5V/2A |
| Waterproof Grade | IP68(lens and wire only) |
| Charging Time | 5-6 hours for full charging |
| Charging Adapter | 5V/2A |
| Working Time | 3-4 hours |
| Pixel | 2.0 Megapixels CMOS |
| Package | 1 x Endoscope |
1 x USB to Micro USB Charging Cable
1 x Side Mirror
1 x Hook
1 x Magnet
1 x Manual
Basic operation:
Download the APP “Scope View” from Google Play Store or App Store. (If the APP “Scope View” doesn’t work on your phone, please download an other app “HD WIFI” to try again, the password is also 12345678)
Turn on the button “ON/OFF”, the red power LED and the blue WiFi signal indicator will light up.
Connect WiFi in your Phone Setting, Click on the “Wi-Fi” or “WLAN”. Find the default WiFi name “Jetion_xxxxxxxx” and join in. The default password is 12345678.
Don’t connect your own home WiFi.
Don’t connect the WiFi in the APP.
After the WiFi “Jetion_xxxxxxxx” is connected successfully. Click the App icon, you can operate the camera now.
Operation Tips
When you choose the resolution that you want, for example, 1920×1080, click the top left corner button and choose “1920×1080”, then click “Set Resolution” button on the right, the resolution mode will be confirmed.
If you want to use zoom able focus feature , press the “+” and “-” button to adjust it.
If you want to take pictures, you can just press the button on the wifi box, or click the second icon on your Scope View app screen, you can check the photos in the first icon or in your smart phone photo album.
If you want to record videos, you can click the third icon on your Scope View app screen to start record videos, you can check your videos in the fourth icon or in your smart phone photo album.
WiFi Password
- You can reset the default password “12345678” to your own password:
- Enter your own wifi password in the “ please enter password” on the left.
- Click “Set wifi password” to confirm on the right.
- Turn off the power button and turn on the power button again, enter the new wifi password, it will work.(But we don’t recommend you to change the wifi password.)
- If you forget the your own password later or you have any glitch with this wifi endoscope, you can plug the needle into the hole for 5 seconds on the wifi box to reset your password to default password.
Instructions of LED Light
Red LED Light – Endoscope Working
Blue LED Light – When WiFi is connected, blue led light flicker. When WiFi is
disconnected, blue light not flicker. You can turn off the endoscope and
connect WiFi “Jetion_xxxxxxxx” again. Green LED Light – While charging the
battery, the green light is on, after it is fully charged, green light is off.
Important Notes
- Prevent any liquid entering the WiFi box, which is not waterproof, kee pit from any water, but the lens and the cable is IP68 waterproof.
- Please don’t let the dirty water or oil cover the camera lens, which may pollute the camera lens.
- Turn off the WiFi endoscope and place it in a dry environment if you don’t use it.
- Please don’t drop the wifi box from height in case of damaging the wifi board.
- It’s normal that the camera will turn hot especially when the LED is in the brightest level, but it will not affect the usage or life-span of the endoscope.
- The WiFi transmission distance is about 15 meters without any obstacles. Please keep the distance between the WiFi box and your smart phone within that distance
- If you find the picture on the scope view is still no matter how you move the camera, the wifi connection may have disrupted, you just need to go to “WLAN” tore connect the wifi.
- Keep away or turn off other strong WiFi signals while using this endoscope, other wise it may affect the connection between the WiFi box and your smart phone.
- Please note that the camera is only IP68 waterproof which means it can only do under water inspection for no deeper than 1 meter and no longer than10minutes.Otherwise, it may damage the camera lens and affect the image quality.
- You can use the USB charging cable with your 5V/2A or 5V/1Acell phone ori Phone or iPad adapter to charge the WiFi endoscope.