TTS-Group EY11965 Glow Discs Instruction Manual
- June 15, 2024
- TTS Group
Table of Contents
TTS-Group EY11965 Glow Discs
Product Information
Specifications
- Product Name: Glow Discs 2
- Battery Life: 60 minutes
- Battery Type: Rechargeable
- Charging Time: 60-90 minutes
- Power Supply: Detachable supply unit (5V 1A)
- Manufacturer: RM plc
- Country of Manufacture: China
Product Usage Instructions
Quick Start Guide
The following steps will help you get started with your Glow Discs 2:
- Open the package and ensure all the items are present.
- Connect the detachable supply unit provided to the Glow Discs using the included cable.
- Plug the other end of the cable into a power source.
- Allow the Glow Discs to charge for 60-90 minutes until fully charged.
Charging the Battery
To charge the battery of your Glow Discs 2, follow these steps:
- Ensure that you are using the detachable supply unit provided with the toy (5V 1A).
- Connect the detachable supply unit to the charging port on the Glow Discs.
- Plug the other end of the cable into a power source.
- The LED indicator on the Glow Discs will turn on to indicate that it is charging.
- Allow the battery to charge for 60-90 minutes or until fully charged.
- Once fully charged, disconnect the supply unit from the Glow Discs.
Using the Glow Discs
To use the Glow Discs 2, please follow these steps:
- Ensure that the battery is fully charged before use.
- Press the power button located on the Glow Discs to turn it on.
- The Glow Discs will start emitting light and glowing.
- Adjust the intensity of the glow by pressing the brightness control buttons, if available.
- Enjoy the mesmerizing glow of the Glow Discs for up to 60 minutes.
- To turn off the Glow Discs, press and hold the power button until it powers off.
FAQ
-
Q: How long does the battery last?
A: The battery of the Glow Discs 2 lasts for approximately 60 minutes on a full charge. -
Q: How long does it take to charge the battery?
A: It takes approximately 60-90 minutes to fully charge the battery of the Glow Discs 2. -
Q: Can I use any power supply to charge the Glow Discs?
A: No, for charging purposes, only use the detachable supply unit provided with the toy. The recommended power supply is 5V 1A. -
Q: Where can I find additional information or support?
A: For additional information or support, please visit our website at www .tts-group.co.uk or contact our customer support at 0800 138 1370.
WHAT’S IN THE BOX
HOW TO USE
WEEE Statements
Waste Electrical and Electronics Equipment (WEEE) – When this appliance is out of use, please remove all batteries and dispose of them separately. Bring electrical appliances to the local collecting points for waste electrical and electronic equipment. Other components can be disposed of in domestic refuse.
Warning
- Chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with the charger until the damage has been repaired.
- Under the environment with electrostatic discharge, the toy may malfunction and require user to reset the toy.
- Please remove the USB cable after charging and keep away from children.
- For electric toys using rechargeable batteries, the batteries should be charged under adult supervision.
This toy contains batteries that are non-replaceable.
Please retain this manual as it contains important information.
Warning: For the purposes of recharging the battery, only use the
detachable supply unit provided with this toy 5V 1A.
USB Statements
This toy is only to be connected to equipment bearing either of the
following symbols.
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
More Information At… www.tts-group.co.uk
RM Resources
Building 1
Heyworth Road
Hucknall, Nottingham
NG15 6XJ, UK
RM Resources
Papendorp Park
Papendorpseweg 100
Utrecht 3528 BJ
Netherlands
Tel: 0800 138 1370
Fax: 0800 137 525
References
- TTS | School Supplies for Primary, Secondary & Early Years
- TTS | School Supplies for Primary, Secondary & Early Years
- DoCs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>