TTS Group EY10972 Light Up Twist and Turn Spinning Tops Instruction Manual
- June 6, 2024
- TTS Group
Table of Contents
Product Description
- Light Up Twist and Turn Spinning Tops.
- Model: EY10972.
- Wireless charging base (with three outputs): Input: 5V DC, 800mA max.; Output: 210mA for each.
- Rating: non-replaceable 3.7V Li-ion battery.
Important Information
- Please read these instructions carefully before using the Spinning Tops.
- To clean use a soft damp cloth.
- Please retain this information for future reference as it contains.
- Keep away from moisture and dirt.
Battery Information
- The Spinning Tops are supplied with non-replaceable Lithium-Ion batteries, do not attempt to replace the batteries.
- The batteries should be recharged by connecting the supplied USB-B cable to a USB port, and the other end to the docking station. Not suitable to adopt power from a transformer.
- Place the Spinning Tops on the docking station and ensure they sit flat on the wireless charging pads.
- The LEDs will flash to indicate charging is taking place. If in storage for long periods or on arrival after being stored in the warehouse, it may take time until the LEDs will come on.
- Do not leave the spinning tops on charge for long periods, it is good practice to only charge when they are flat to preserve the useful life of the battery.
- The recharging actions must be handled by adults. Keep children away from the toy while recharging the batteries.
- Battery chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure, and other parts, and in the event of such damage, they must not be used until the damage has been repaired.
Instructions for Use
- Knock the Spinning Tops to activate them. Spin them to light up. Changing the direction of rotation will change the color. Faster speeds will make the lights brighter.
- After approximately 1 minute with no movement, the Spinning Tops will enter standby and will need to be knocked to reactivate them.
- If the Spinning Tops no longer illuminate, connect the charger as described in the battery information section.
Cleaning and Maintenance
- Unplug the wireless charging base before cleaning.
- Never immerse the toy and charging base into water or liquids.
- Wipe the toy and charging base with a damp cloth or use a mild, non-abrasive soap solution.
- Make sure to properly clean the unit before storing it in a cool, dry place.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in conjunction with any other antenna or transmitter.
TTS Group Ltd.
FCC ID: 2ADRE-EY10972
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TTS Group Ltd.
NG17 9GU, UK.
Made in China,
on behalf of TTS Group
TTS Product Codes:
EY10972 10 Months +
TTS is proud to be part of RAN™ plc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>