P602YA E-Audio 60W Active Wall Mounted Speaker Instruction Manual
- June 6, 2024
- e-audio
Table of Contents
P602YA (White)
P602YBA (Black)
E-Audio 60W Active Wall Mounted Speaker (Pair) with Bluetooth and
Auxiliary
IMPORTANT
Installer and Users please note: These instructions should be read carefully before use and this document constitutes part of the product that should be kept safely by the user alongside the product.
BEFORE USE
You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately.
PRODUCT SAFETY
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved
- Children shall not play with the unit
- To prevent the risk of electric shock or fire, do not expose the speaker or power supply to moisture or rain
- If the amplifier or power supply comes into contact with water or other liquids, stop using immediately and have the unit checked by a qualified person before further use
- Ensure there is adequate ventilation around the unit and the power supply before use
- Do not use the unit for any purpose other than its intended use
- Check the unit and power supply periodically for damage, if any damage is detected stop using it immediately and consult your supplier
- For domestic use only
- Only use the power supply provided with the unit
- This unit and its components must only be installed by a competent person after taking a site survey to establish the structure is suitable and there are no existing plumbing, gas, electrical services or other obstructions
- Disconnect from the mains supply when not in use
- There are no user-serviceable parts in this product
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every change of occupancy. For office and retail premises (and buildings such as village halls), the wiring must be inspected at least once every 5 years. It is recommended that all buildings be fitted with smoke alarms (it is mandatory for new buildings).
PAT TESTING
When used in a workplace, this product must be safety-tested yearly by a qualified electrician (PAT Tested) in order to comply with the Electricity at Work Regulations. If hired out, it must be PAT tested prior to each hire. We recommend that it is PAT tested regularly when used in a domestic environment.
INSTALLATION
The speaker brackets must be fitted only after a survey has been conducted. Use the bracket to mark fixing locations on the structure and securing using fixings appropriate for the structure.
CONNECTION
- Connect the PSU (A) to the socket (C) on the back of the unit
- Connect speaker cable (B) between the 2 units, observing correct polarity
- If required, connect an auxiliary cable to socket D
DEVICE SYNCING
To connect the amplifier to your device:
- Ensure the Bluetooth function on your mobile device is set to ‘ON’ and ensure the speaker is plugged in and switched on The amplifier should now be discoverable by your device (you may need to scan for new devices)
- The amplifier will be shown as E Audio, to sync, select the device and connect (no password is required)
Bluetooth Name: E AUDIO
Password:
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste. Most local authorities have specific collection systems for appliances and disposal is free of charge to the end-user. When replacing an existing appliance with a similar new appliance, your retailer may take the old appliance for disposal.
TECHNICAL SPECIFICATION
Max Power
Impedance
Sensitivity
Frequency Response| 120W
8Ω
90Db
80-20,000Hz
---|---
CLEANING
- Disconnect the unit from the mains power supply before cleaning any of the components
- Use a dry, soft cloth only to clean the units
- Do not use detergents or abrasive cleaners
SERVICE WARRANTY
Electrovision guarantees the product free from defects in materials and workmanship for a period of one year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void. The product you buy may sometimes differ slightly from illustrations. This warranty is in addition to and does not affect, your statutory rights.
Electrovision Ltd.
Lots Lane, Sutton Oak
St. Helens, Merseyside
WA9 3EX