Shenzhen Dongfang Qiyi Optoelectronic Technology DFQY-CS14 Corner Floor Lamp User Manual

June 6, 2024
Shenzhen Dongfang Qiyi Optoelectronic Technology

**Shenzhen Dongfang Qiyi Optoelectronic Technology DFQY-CS14 Corner Floor Lamp User Manual

**

Safety Instructions

  1. This lamp is not waterproof. Avoid exposing it to splashing or dripping water.
  2. Operating temperature should be within -25C to 85 C.
  3. Do not allow children to assemble the lamp by themselves.
  4. Avoid placing the lamp near heat sources.
  5. Avoid placing the lamp near potentially dangerous sources. (e.g., candles, liquid-filed objects, etc.)

Product List

  • LED Floor Lamp 1
  • Power Adapter 1
  • Remote Control 1
  • Screw 6
  • Allen Key 1
  • User Manual 1

Installing Your Floor Light

  1. Connect three lamp bars.

  2. Reinforce the lamp bars with Allen Key and screws.

  3. Rotate and fix the lamp bar according to the direction of the base.

  4. Connect the adapter and plug it in to test the lamp. Installation is successful if all 3 lamp bars are on.

Trouble Shooting

  • Partial lamp bars are on/ The lamp is no reaction
    1. The screws are installed too tightly, resulting in poor contact.
    2. Try to change the color with the remote control.
    3. Open CozyLife, Click “more”-“set number”-“84”-“confirm”.

CozyLife APP Download



  1. Register an account and choose your country.

  2. Connect your phone to WiFi (Only 2.4Ghz available)/ open the data network/turn on the phone’s Bluetooth.

  3. Two networking methods (remote control/plug in and unplug three times)

  4. Turn on device, long press the On button, the floor lamp flashes red, release the button, and the device enters the network configuration state.

  5. Turn on/off 3 times(on/off/on/off/on), The LED light flashes red, indicating that it has entered the state of network distribution.

  6. After successful networking, add the device.

Connect to Alexa

First: Open Amazon Alexa APP

Second; Binding Account

Third: Control Device

Alexa Support

[Voice Control]
Click [Settings ] and make sure the [device name] is the same as your voice control name, otherwise it will fail. You can do short answer operations(Switch, Brightness, Color):

“Alexa, turn on [device name]”
“Alexa, turn off [device name] ”
“Alexa, [device name] change to red”

Create a Routine

Note

  1. Only support 2.4GHz, not 5GHz.
  2. The distance between the device and the router should not be too far away, which will affect the Wi-Fi signal.
  3. Make sure the Wi-H password is entered correctly, just English and Numbers.
  4. If the device is offline and can’t be controlled check if the Wi-Fi is off, turn off some other connected devices, the router may be overloaded, update the application interface.
  5. 1f you change the Wi-Fi password, please reconnect. When restoring factory settings, you must turn off the lamp for 10 seconds and then try again.

Remote Control Instructions

Product specifications

  • Model: DFQY-CS14
  • Lamp bead type: 5050RGB
  • Number of lamp beads: 84PCS (1.2M)
  • Output power: 12W (1.2M)
  • Output voltage: AC85V- 265V
  • Remote Control distance: within 15 meters
  • Working temperature: -25°C—+85t
  • Beam angle: 160°
  • Light bar size: 1200mms8mm(1.2M)
  • Packing size: 45.513.86.7cm

Troubleshooting

  • Partial lamp bars are on/ The lamp is no reaction

    • The screws are installed too tightly, resulting in poor contact.
    • Try to change the color with the remote control.
    • Open CozyLife, Click “more”-“set number”-“84”-“confirm”.
  • Remote control cannot be used.
    Remove the plastic piece from the remote control.

  • Which system of android or 10.5 does this app support?
    iOS:—-V10.0, Android V5.0(only for mobile phones, not for tablets and other devices) and Bluetooth V5.0 are required.

  • Issue problems in using the Cozylife App.
    Open Cozylife APP, tap [Help and feedback] – [Application] -[Smart Speaker] – [Network]. You also can tap [Feedback], put forward your suggestions and problems, so that we can upgrade the software and better serve our customers.

Warranty

The warranty period of this product is six months. During the warranty period, if it is not artificially damaged, we will replace it or refund it. Just contact us by Email or Facebook, we will be here to serve you. We try our best to ensure that your products are of excellent quality and meet the highest standards. You can expect every product to have outstanding quality and durability.

Important

You may be asked to provide proof of purchase, such as a screenshot of the order number or order details. If you can attach a video or photo to describe the problem, we would appreciate it.
support: ledfloorlamp@outlook.com

Warning

Do not put into water, keep away from fire, children under 16 years old should use under adult supervision

If you have any question after receiving the products, please contact our customer service,we will reply to you within 24 hours. Email ledfloorlamp@outlook.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement for Lamp This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals