Shenzhen Aiweiyi Technology SW-MU-B Wireless Microphone User Manual

Aiweiyi Technology SW-MU-B Wireless Microphone
User Manual

Transmitter function description

UHF Universal Wireless Microphone Manual

A.features:

1. frequency range: UHF frequency (channel A and channel B)
2. use 24bit/48khz high-performance audio special A/D and D/A processor
3. use id code+frequency for frequency match encryption. (although two receivers are using the same frequency, the receiving chip is interfered with by signal. It only will affect the working distance, it will not cause noise.)
4. has auto-mute and impact eliminating circuit, to avoid impact and noise while turning on/off the unit.

B. technical I specification

1. Frequency range: UHF frequency
2. Frequency Channel:16 channels, ID code is changed randomly.
3. Oscillation Mode: DSP chip frequency lock
4. Frequency Stabillity:±10ppm
5. Frequency Power:l0dBm
6. Frequency Response:40-18KHz
7. Distortion:<0.5%
8. Battery:1.5V/AA Size
9. Working Hours:4-8 hours.
10. Frequency range: 630-690M Hz
11. Use range: 30-50 meters

C. Receiver specifications:

1. Frequency range: high frequency
2. Frequency Channel: 16 channels, the ID code changes randomly.
3. Oscillation mode: DSP chip frequency lock.
4. Frequency stability: ±10ppm
5. Receiving sensitivity -95-71dBm
6. Frequency response: 4018KHz
7. Signal to noise ratio: 2>90Db
8. Audio output: 300mv (maximum)

Product frequency method

1. Simultaneously press and hold the microphone switch and FM button for 5 seconds, the display flashes.
2. Turn on the receiver powe switch, the receiver power green light flashes 3 times, and the frequency matching is automatically performed.
3. Press the FM button once to use.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>