Hotpoint lSB 5B019 Dishwasher Instruction Manual
- June 6, 2024
- Hotpoint
Table of Contents
Hotpoint lSB 5B019 Dishwasher
Operating Instructions
Control Panel
Programs
Operating the dishwasher
- Load the dishwasher
- Check that the upper and lower arms can rotate freely
- Add the detergent and close the door.
- Press the On/Off switch.
- Select the wash cycle by turning the wash cycle select knob clockwise. The START/PAUSE indicator light will go on.
- Start the cycle by pressing the START/PAUSE button. The indicator light corresponding to the wash phase will go on to signal that the cycle has begun.
- Once the wash cycle has finished the appliance will beep and the END indicator light will go on.
- Switch off the appliance by pressing the ON/OFF button.
Warning! Do not open the dishwasher door whilst the appliance is in operation.
**Unloading the dishwasher
**
Care must be taken when opening the door as hot steam will escape. Please allow 15-30 minutes before unloading the dishwasher so the dishes can cool. Unload the lower rack first, then the upper rack.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>