J Well Technology Z-T212 Wireless Trailer Light Kit Instructions
- June 6, 2024
- J Well Technology
Table of Contents
J Well Technology Z-T212 Wireless Trailer Light Kit
Complete Kit Includes
- Wireless Trailer Lights
- Convenient Carrying Case
- Vertical And Horizontal Mount Brackets
- USB Cigarette Plug Charger
- Wire Blade Wireless Transmitter
- Dual USB Charging Cable
INSTRUCTIONS
Read The Following Information Carefully Before Use
Charging Instructions
- Charging Time:
- 2.5 Hours
- Dual USB cable charges both lights at once.
Battery Life
- 1111D 100% Charge: 8 Hours of Run Time
- DD 50% Charge: 4 Hours of Run Time
- CD 25% Charge: 2 Hours of Run Time
A, The battery life indicator is for reference only. Run times may L.!.l depend on road conditions and driving patterns.
Installation Instructions
- Insert transmitter into the receptacle on your vehicle.
- Attach tow lights to the rear of the towed vehicle or trailer.
Operating Instructions
Turn On:
Press the on/off button forl second. When the white power indicator light
illuminates, the unit is powered on.
Turn Off:
Press the on/off button for about l second until the white power indicator
light turns off.
NOTES: The blue battery indicator light will illuminate for 15 seconds before turning off, but the unit is still on. The blue battery indicator light will also remain on for 15 seconds before turning off.
License Plate Light Instructions
Turn On:
Hold the power button for 3 seconds, the license plate light will illuminate.
Turn Off:
Hold the power button for 3 seconds or double click, the license plate light
will turn off.
Pairing Instructions
To pair, turn on your vehicle, turn on your headlights, and plug in the transmitter.
Testing Instructions
Mounting Instructions
- Use the strong rubber-coated magnet/suction cup bases to mount to any fla smooth surface on the back of the trailer or towed vehicle.
- Position the left and right wireless lights appropriately.
- Place the lamps as far apart as possible for maximum visibility.
Specifications
Input Voltage
Working Frequency
| DC 5V
2.4GHz
---|---
Radio Communication Range| 100 Feet
Battery Capacity| 2,600MAH
Charging Time| 2 to 2.5 Hours
Waterproof Level| IP67
Operating Temperature| -73° F to 150° F (-25°C to 65°C)
Dimensions| See Drawings Below+
Important Safety Instructions
-
Fully charge battery before use.
-
Check battery life before use.
-
Test all light functions before use.
-
Charge the battery every 6 months if not in use.
Test lights frequently when using for long periods of time. -
Always consult your vehicle’s owners manual before use.
-
Replacement or additional lights must be paired before use.
-
Great for trailering and towing, always mount on a flat, smooth surface.
-
Intended for intermittent use only. Not intended for speeds exceeding 35mph.
FCC Warning：
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>