Shenzhen Weiyucheng Technology WY-018 Universal Bluetooth KB for Tablet User Guide
- June 6, 2024
- Shenzhen Weiyucheng Technology
Table of Contents
Universal Bluetooth KB for
Tablet
Model: WY-018
QUICK GUIDE/ GUIA RAPIDA
Features
Thank you for choosing this Bluetooth Wireless Keyboard. It supports Bluetooth wireless connection and a scissor key structure, which will bring you a perfect input experience. It has o built-in rechargeable polymeric lithium battery and charging indicator. The keyboard will enter into sleeping mode if there is no action for 10 minutes, therefore it has a low energy consumption and long battery life.
Pairing Instructions
Before using this keyboard, it must be connected to your tablet or to any
other device. When it successfully pairs, you do not need to re-connect it in
the future. Please refer to the following instructions to connect the keyboard
to your tablet.
• Turn on the keyboard.
• Press the ‘Connect’ button for 3 seconds, the blue light blinks.
• Open Bluetooth settings in your tablet and find the Bluetooth Keyboard, then
click and connect (Password free connection).
| Desk/ Exit
---|---
| Searching
| Select All
| copy
| past
| cut
| Previous
| Play Pause
| Next
| volume-
| Voliume+
| lock screen
Moin Keys Q)
For Windows device. press Fn+W(Win) to switch to Windows mode. Fri+ function
keys, Press Fn and the blue keys as below
Other main keys 1. Control+Commond•O will open soft keyboard. 0 For Android or
IOS device, press Fn+O(Androicf)/EfiOS) to switch to Android/10S mode. Press
the blue function keys os below. Fn+Enter will switch languages. This function
is available for Android/10S devices.
Indicator Power LED:
When the keyboard powers on, it flashes for 1-2 seconds, and then it turns off
automatically. Charging LEa It flashes while charging and turns off once the
tottery is fully charged. BT LED: It flashes when the keyboard is connecting
and it turns off once it is connected. CAPS LEO: It noshes when switching to
upper case letters.
Charging Instructions
- It is important to charge it of least 6 hours when using the keyboard for the first time. Next time when the bottery is low, please charge it of least for 2 hours.
- When the red indicator noshes, it means it has a low bottery and it should be charged again. When it is charging, the red indicator flashes oll the time.
- Please correctly connect the charging cable to the keyboard os shown below
Troubleshooting
If your keyboard doesn’t work properly
- Please make sure that the Bluetooth function in your tablet or any other device is enabled.
- The keyboard should be within 10 meters from the device.
- If the Keyboard’s built-in battery power is too low, please charge the keyboard.
- If the keyboard does not connect or poirs with your tablet or ony another device, please proceed to the following steps: First, delete or forget oll Bluetooth devices in your tablet. Second. dose the Bluetooth option in the tablet. Finally, restart the Bluetooth option in the tablet and connect again with the Bluetooth keyboard.
Specifications
- Frequency 2A GHz
- Voltage: 3.7V DC
- Working Current: <SmA
- Standby current: 1.0mA
- Sleeping current <0.25mA
- Distonce Range: 10 meters
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>