SPARKO PT0003 WiFi Pet Camera User Manual
- October 27, 2023
- SPARKO
Table of Contents
SPARKO PT0003 WiFi Pet Camera
Main Function Description
How to Download Mobile App
- Option 1: Search and download “Tzumi Smart Home” in your app store.
- Option 2: Scan the QR code below.
Reset Button
Use the included metal pin to press and hold the RESET button for 5 seconds. This will reset the camera back to factory settings.
Using the App
Register an account using your email or mobile number
- Click on “Sign Up to create an account using your email address or mobile number.
- Create a password for your account
Log in with an existing account
- Click on “Log in, the system automatically select the current Country/Region, or you can manually select the Country/Region.
- Enter your mobile number or e-mail address, enter your password to log in to the system.
- Log in with an Apple ID, click on the Apple icon on the bottom of the log-in page. After accessing the authorization page, log in to the system.
Connecting the Camera
- Sparko Pet Wifi Camera only supports 2.4GHz Wi-Fi. Before adding the device, please make sure the router and your phone are both in 2.4GHz Wi-Fi.
- Connect the micro USB cord to the camera using the micro USB end then connect the USB end to an AC adapter (not included). Finally, connect the adapter to a power outlet.
Add Device
Scan QR code to add
- Press “Add Device”{Figure 1) on Trump Smart Home app home screen, select “Smart Pet” (Figure 2) tab, then choose “Pet Camera”. Select “QR code” on the top right corner to add, then click “Next step” (Figure 3).
- Connect the camera to a power source, wait for the camera to boot It will automatically start a self-testing. When you hear “Camera Started” from the camera, the blue indicator will blink rapidly. Note: If the camera does not boot automatically, use the included metal pin to reset the camera.
- Select your preferred Wi-Fi network then enter the Wi-Fi password and Press “Next”. (Figure 4) Note: The Wi-Fi password should not contain special characters such as -!@#$¼A&•(),
- Align the QR code displayed on your phone with the camera lens. (Figure 5) Maintain a distance between 4 to 8 inches, hold still until you hear ”bi bi” sounds from the camera.
- Press “I hear a prompt” after hearing a beep from the camera. (Figure 6-7)
- Name your camera and start experiencing after the camera is connected to the network. (Figure 8)
Function Introduction
Real-Time Preview interface
- Setting
- Wi-Fi Signal Strength
- Sound/Mute
- SDHD
- Full screen
- Snapshot
- Voice chat
- Record live view
- Playback of video
- Cloud Storage
- Manual Camera Track Pad
FAQ
Q: Can’t add the device?
A1: Please make sure the camera has been reset. Press the reset button until
you hear the prompt tone.
A2: The camera only supports 2.4GHz Wi-Fi. If your Wi-Fi router uses 5GHz,
please switch to 2.4/5GHz dual mode.
A3: If still fail to add device, it is recommended to restart the device or
power oft the decice, then try again.
Q: The device is unable to preview?
A: Check for weak Wi-Fi signal. You can place the camera close to the router.
If it still doesn’t work, reset the device, then add it again.
Q: Why is the device still on the list after resetting the device?
A: The device resetting only resets the camera’s network configuration and
cannot change the configuration on the App. You must log in to the app to
delete the camera from the list.
Q: How to connect the camera to another router?
A: Log in to the app to delete and reset the device, then reconfigure the
device through the app.
Q:The SD card can’t be identified?
A: It is recommended to insert and remove the SD card after power off the
device. Check if the SD card is under normal service conditions and the format
is FAT32.The app should suggest could not find SD card” under the unstable
network of the mobile phone or the device.
Q: The device is online and has an alarm event, but my mobile phone does
not receive the information?
A: Check your phone settings, make sure your mobile phone allows notifications
from the app. Under normal circumstances, when an anomaly is detected, a
message will appear in the notification bar of your mobile phone. You should
set a notification sound or vibration in your mobile phone. In addition, when
viewing the real-time video in the app, you will not receive alarm from the
camera. The device’s default setting is to be focused on monitoring the video,
therefore, the alarm is not needed.
Our advanced intelligent alarm system ensures that alarm messages will not be
sent frequently, but the camera will record all the alarm messages and videos.
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>