PROJECTE BEAUTY PE727 LED Light Therapy Mask User Manual

PROJECTE BEAUTY PE727 LED Light Therapy Mask

Introduction

Thank you for purchasing the LED Light Therapy Mask (Model No. PE727). This device uses colored LED lights to provide pure light to treat a variety of skin conditions and rejuvenate skin, while reducing scar tissue. Unlike other beauty devices, this mask provides high-quality LED photon treatment that has been scientifically validated, so you can achieve efficient results faster than you ever imagined.

Photon light therapy works by using the natural healing properties present in differing wavelengths of light to treat various skin tissue issues. These state-of-the-art LEDs provide the purest light possible, especially compared to systems that use more traditional bulbs. Modern semiconductor technology has allowed dermatologists to perfect what wavelengths of light are generated, meaning more of the healing energy of the light reaches the skin tissue.

Exposing the skin’s tissue surface to light activates natural photoreceptors and allows the skin cell to absorb the energy found in the light. This process accelerates biochemical reactions in the skin tissue, ultimately, leading to faster healing times, while increasing the production of collagen. This can reverse some of the more heinous effects of aging.

This technology is safe. Cosmetology experts agree these treatments have no noticeable side effects if they’re administered correctly. Treatment methods provided by the LED photon mask are an important component of a complete skincare routine and should only be used for cosmetic purposes. This is not intended in any way to diagnose, treat, cure, or prevent any disease.

This LED Light Therapy mask is designed in a facemask-shaped to ensure a comfortable experience and it is made from flexible silicone which ensures light penetrates every area of the face. It’s made of 66 LEDs to provide a power intensity of 30mW/cm, with red and blue light settings to provide treatments for various skin concerns. This mask is wireless and you can conveniently use it anywhere. Our light therapy face mask uses the latest in light irradiation technology and quality materials making it safe, comfortable, natural, and reusable.

Benefits of Photon LED Therapy

Recent cosmetology breakthroughs have shown that LED light therapy is effective for treating several aspects of skin aging. Studies suggest this therapy can reduce the appearance of fine wrinkles, rough skin, shallowness of the flesh, and mottled hyperpigmentation. The LED light therapy increases both the proliferation and the initial production of collagen. A few studies have also suggested this therapy can cut down on the types of bacteria that cause spots and pimples. This might also help to eliminate breakouts and minimize the level of scar tissue. Each of the colors of LED light has a different specific function. They are
each selectable by way of the control box.

Red Light(~630 nm): This setting allows the LED mask to penetrate the skin more deeply. Red light penetrates the skin approximately 8-10 mm, which stimulates the cells that lie at this layer. Many are fiber cells, and stimulating them can aid in the production of collagen. It can reduce wrinkles and make skin elastic and smooth. It’s ideal for improving skin in the area around the eyes and forehead. It works well to cut down on fine lines. Those who need to repair damaged skin will opt for this setting.

Blue Light(~465 nm): This setting allows the energy from the LED mask to penetrate the skin approximately 0.5mm. It’s optimized for use with rashes and is suitable for skin that is sensitive or constantly oily. Blue light can help to reduce acne and even tighten skin that has loosened. It can quickly inhibit inflammation and possibly even destroy harmful bacteria.

Safety Information

Precautions:
Read all instructions before using your LED Light Therapy Mask and make sure you understand all of the operating instructions.

• Always check the device before use to ensure it is undamaged. Use of a damaged device can be unsafe.
• Stop immediately, if you experience any adverse effect or have a concern regarding use.
• Do not look directly or shine light in the eyes while in operation.
• Do not use on eyelids; do not place the light over eyelids.
• Do not use over any suspicious or cancerous lesion. Consult your doctor.
• Do not use the LED mask while using any product that contains AHA or glycolic acid. This can cause unwanted levels of stress in the skin.
• Do not allow children to use the device unsupervised.
• Remember that improper maintenance or negligence can cause damage and void the warranty. This also refers to improper storage.
• Dispose of all products in accordance with local and national regulations and codes.
• Do not use if you are sensitive to light. If you are unsure whether you have increased sensitivity to light, we recommend you perform the Light Sensitivity Test instructed in this manual.
• Do not use if you are taking drugs known to make you sensitive to light. You may be sensitive to light and not know it. There are photosensitizing agents in drugs, foods, soaps, cosmetics, and dyes.
• Drugs that are known to cause light sensitivity: Antibiotics; NSAIDS; Diures; Retinoids; Hypoglycemics, HMG-CoA reductase inhibitors (statins), Photodynamic Therapy drugs, Prophoto sensitizers,
• Neuroleptic drugs, or Antifungals.
• Do not use over or near a recent steroid injection. Doing so may result in photosensitive reactions.
• This device cannot be used in charging mode.
• Store this device at room temperature in dry conditions, away from direct sunlight.

Warning

• Discontinue use if you encounter any discomfort or skin redness that lasts for more than two hours. You may have sensitivity to light or another condition. Consult your health care provider.
• Never operate this device if it is not working properly, if it has been dropped or damaged, or submerged in water. Return the device to Project E Beauty for examination and repair.
• Do not set or keep the device where it can fall or be pulled into a tub or sink. Keep away from water (including bath and shower). If the device accidentally falls in water unplug immediately.
• Keep away from flammable aerosol products.
• Do not use other AC Power Supplies or Chargers to charge your LED mask.
• Turn off immediately, if the mask begins to overheat.

Contraindications

• DO NOT USE if one of the following pertains to you.
• Pregnant : Do not use if you are pregnant or think you might be pregnant. The device has not been tested on pregnant women and the effects, if any, are unknown.
• Migraine : Do not use if you have experienced a migraine in the last two years.
• Seizures : Do not use if you have a history of light triggered seizures.
• Lesions : Do not use this device over any suspicious or cancerous lesions. To do so may result in delaying the best medical treatment.
• Failure to use and maintain the LED mask in accordance with the instructions outlined in this manual will invalidate the warranty.

What is Included

Description for Indicators

Mode indicator:
Once the desired mode is selected (Anti-Wrinkle or Anti-Acne), the corresponding mode indicator will light up on the controller.

Battery indicator:

1. While charging:
   The Battery indicator will flash in green.

2. While fully charged:
   The indicator will solid on the green.

3. While in normal use:

   • When remaining power of the battery is ≥25%, it indicates in green.
   • When remaining power of the battery is <25%, it indicates in red.

Location for Indicators

Check for Situations Before Use

Please distinguish your acne level according to the table below before using the Anti-Acne mode, it will provide more effective instructions for your choice.

Types of Acne| Description of Condition| Is this Mask right for you?
---|---|---
Comedonal Acne| Whiteheads and blackheads, which are small raised white or black bumps under the skin| No
Mild Acne| Several inflamed pimples – Red in color| Yes
Moderate Acne| Many inflamed pimples (red in color) and pustules (visible accumulation of pus in the skin)| Yes
Severe Acne| Inflamed pimples and pustules (visible accumulation of pus in skin) with a deep nodular lesions (solid mass can be felt under skin). Many nodular cystic lesions| No
Consult Your Dermatologist

Light Sensitivity Test

Recommended Before Use

In order to determine if you have a Light Sensitivity Issue please follow the instructions below. It is recommended that you test a small, less sensitive area of skin (i.e., like your forearm).

1. Place the device on an area of the forearm.
2. Switch ON the controller and allow the device to run for its full 10+minute treatment program. The device will automatically switch off after 10 minutes.
3. At any time if your skin feels any uncomfortable STOP using the device immediately.
4. Wait 24 hours. You should NOT experience any adverse reaction during the next 24 hours.

A bad reaction to light occurs if you have pain or discomfort in the treatment areas or any skin redness for more than two hours. It can be due to medication, supplements, or a possible skin issue.

Eye Safety

1. The design of this mask does not cover the eye area. Therefore, it is not needed to put on eye protection while performing treatments. Be sure you never look directly into the LEDs.
2. It is NOT recommended to shine the light source directly into eyes or the eyes of others

Use of the Device

Follow these steps to ensure proper operation during a treatment:

1. Before your first use the device, charge it for 4 hours. Select your country-specific adaptors and insert it into the power plug. You will hear the pop sound when it fits.

2. For charging:
   Insert the USB Type-C cable into the controller. Insert the power supply into a suitably grounded outlet and switch on.
   Note : When in the charging mode, the mask will not illuminate.

3. This device comes with an adjustable strap that allows you to comfortably wear the mask. To fit the mask, thread the strap through the inlet holes on either side of the mask

4. Place the mask on the face. Loop the strap around your head and secure firmly. Adjust the strap as required

5. Connect the mask and the controller with the USB cable.

6. Turn on the mask by pressing the power button on controller for 2 seconds. The default mode is Anti-Wrinkle mode (Red Light), when the device turned on, the Anti-Wrinkle mode indicator will light up.

7. Short press the power button on the controller to change the Anti-Wrinkle mode to Anti-Acne mode (Blue Light), which is intended to treat mild to moderate acne.

8. The mask will automatically shut down when the 10 minutes treatment is over. You can turn off the mask in advance by pressing the power button on the controller for 2 seconds.

IMPORTANCE:

1. It is recommended to have a 10-minute treatment a day and 3-5 times per week, overtreatment is not advised.
2. Do not use any makeup and cosmetics that contain chemical or acidic components which may affect light output and lead to a decreased or in-effective treatment.
3. Be sure you never look directly into the LEDs.

Maintenance

• Clean the mask surface with a soft cloth after each use.
• Ensure that the device is switched off when cleaning.
• Immediately dry the surface any time it comes into contact with moisture, chemicals, or water.
• Always keep the device clean and sterilized.
• Store the device in a clean and dry place.

Specifications

Safety and EMC

| IEC 6060 1-1, IEC 60601-1-2, IEC

60601-1-6, IEC 60601-1-11, IEC

60601-2-57

Biocompatibility| ISO 10993-1, ISO 10993-5, ISO 10993-10

Operating Environment

| Temperature: -10-35°C Humidity: 30-80%RH

Atmospheric pressure: 700hPa to 1060hPa

Storage Environment| Temperature: -20-60°C Humidity: 30-90%RH

Atmospheric pressure: 700hPa to 1060hPa

Charging Time| 4 hours

Explanation of Symbols

Warranty

Activate Your 1 Year FREE Warranty Now.
This product comes with a full one year warranty against manufacturer defects. It does not include damage caused by misuse, accident, abuse, neglect or other external causes. All we need is your name, email and order ID. That’s it.

Questions

Website:www.projectebeauty.com
Email:sales@projectebeauty.com
Tel: +1-626-759-4232
Our customer care expert team is here to answer any question you might want to ask.

References

• Project E Beauty │ Your Skincare Expert │ Your Beauty Device Expert
• Warranty Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>