COREMATE I-217D1 4K Android TV Stick User Guide
- June 6, 2024
- COREMATE
Table of Contents
4K ANDROID TV™ Stick
Quick Reference Guide
Please read the user manual before operating the Stick
www.coremate.com.tw
Safety instructions
WARNING!
- Presence of live parts inside the device! Do not open. Risk of electric shock!
- No parts should be repaired by users.
- Place the device on a flat, firm and stable surface. Do not put it on a carpet or rug.
- Place the device in a well-ventilated location to prevent the accumulation of internal heat.
- Protect the device from high temperatures, humidity, water and dust.
- Do not place any objects near your device that may damage it (e.g. liquid-filled objects or candles).
- Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cab, ni-mh, etc.) batteries.
Accessory List
Please open the package and check the following accessories:
Hardware Structure
- Front Panel
- Bottom Panel
- Top Surface Panel
Remote Control
Not e: Press the Google Assistant button to start voice search for what you want.
System Connection
Please refer to the below pictures and instructions to connect TV Stick
Note: Please turn off all equipment before connecting.
Step1
Connection with TV
Plug the TV Stick into the TV’s HDMI port.
Step2
Connection with Power
Use the power adapter to connect the Stick and TV. Plug the power adapter into
the A/C outlet. If TV has a powered USB port, it can also plug the micro-USB
cable directly into the Stick port.
Note: Some USB ports don’t provide enough continuous power. You need to
connect with the A/C power outlet directly.
Step3
Connection with Network
Enter Settings→Network to turn on Wi-Fi and connect an available Wi-Fi network
with the correct password.
Troubleshooting
-
No display after power on?
Confirm your device is connected to the TV well and set the correct HDMI Input from your TV configuration. -
TV has images but no sound?
Make sure your TV is not in mute and low volume. -
Fail to connect to the network?
Make sure your Wi-Fi is functional and your box has a strong enough signal from your router. -
Remote Control Failure?
Replace your Remote Control batteries with new ones, then re-paired it by pressing the pinhole on the side of the device for more than 3 seconds. -
Please use our accessories to avoid any risk.
Compliance
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Google, Android, Google Play, YouTube and other marks are trademarks of Google
LLC. Netflix is a trademark of Netflix, Inc. All brands contained herein are
trademarks of their respective owners.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>