Freevision Technologies RE125V01 RexID Rewritable 125KHz Blank Keyfob Tag Working Instructions
- June 4, 2024
- Freevision Technologies
Table of Contents
Freevision Technologies RE125V01 RexID Rewritable 125KHz Blank Keyfob Tag Working
INTRODUCTION
Windows OS based PC software with no need of USB driver installation. Standard HDProx, AWDProx, EMID Supported.
DOWNLOAD SOFTWARE
Please download the software first before you operate the RexID Programmer.
https://www.freevisioncorp.com/support/software
Or email: [email protected] for a copy
of the software.
-
Install the software and open it.
-
Create Account, then Sign in.
-
Link the RexID Programme
-
Click “Increase The Credit”, then Follow the prompts.
-
If you know the format of your credential.
Just choose the right format on the software, to read or write.
-
If you don’t know the format.
Please begin with “HDProx” on the left side of the tabs and work your way down the different protocols until identify the correct version. -
If still not work after test all protocols.
please email : [email protected]
For Any questions on the User Manual or want more function of the RexID programmer, please feel free to email: [email protected]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction