DETONGER DP23L Portable Bluetooth Thermal Label Maker User Manual

June 6, 2024
DETONGER

DETONGER DP23L Portable Bluetooth Thermal Label Maker User Manual
DETONGER DP23L Portable Bluetooth Thermal Label
Maker

Printer Parts

Product Overview

Basic Operation

  1. Power On
    Press power button for 1.5s to turn the printer on.

  2. Paper Roll Installation
    Press the top cover open button and the top cover lift; Place the paper roll into the paper bin. Please make sure the paper printing side face down, insert adjusting plates into appropriate slots according to paper’s width. (The plates are inserted on both sides of paper bin as factory default) Pull a part of paper out then close the top cover.

  3. Feed Paper
    Label paper: short press feed button to feed one label to the beginning of
    next label; long press feed button to feed label continuously, release the feed button to stop at the beginning of next label. Continuous paper: press feed button to start feeding label, release feed button to stop feeding.

  4. Power Off
    The printer will shut down automatically if no use it for a long period.
    Time of automatic shutdown can be set by setting button, the default time is 15 minutes. Press power button for 1.5s to shut down the printer.

  5. Set Up Printer
    Short press setting button, the printer enters setting status when the icon appears on the top left corner of OLED display, press OK button to make corresponding options.

  6. Charge Printer
    5V Output charger and power bank with USB port are the two ways to charge printer.

  7. Secondary Function
    The printer can provide 5V (600mA) power for external devices via USB port, like phone, Pad, etc.

Connect with Printer

  1. Install Editing Application
    Scan QR Code to download label editing App (Android, iOS). Or search App name “Weida” from Google Play or App Store

  2. Connect with Printer via BT
    Turn on printer-turn on mobile phone BT-open label editing App, click “NO Printer Connected”. Then you can edit your label and print it.
    Connect with Printer via BT

  3. Various Templates
    Tap “All Templates” you will find various templates for different industries from “Official”. Please contact with us if you need customized cloud catalogue

Specifications

2 inch Thermal Label Printer

  • Display Type: 2 inch Thermal Label Printer OLED display
  • Print Method: Direct thermal line
  • Print Color: Black
  • Print Width: 48mm
  • Paper Size: 54(W) × dia.50 mm
  • Resolution: 203 DPI/300 DPI (Optional)
  • Interface: BT
  • Battery Capacity: 1500mAh
  • Command Set: LPAPI, CPCL,ESC/POS compatible with instruction sets

3 inch Thermal Label Printer

  • Display Type: OLED display
  • Print Method: Direct thermal line
  • Print Color: Black
  • Print Width: 72mm
  • Paper Size: 80(W) × dia.50 mm
  • Resolution: 203 DPI
  • Interface: BT
  • Battery Capacity: 1500mAh
  • Command Set: LPAPI, CPCL, ESC/POS compatible with instruction sets

Safety Notices

Please compliance with following notices during operation

  • NOTE Do not disassemble the printer by yourself. Please read this manual carefully before use.
  • WARNING Turn off the power immediately if a malfunction occurs. When the printer or charger emits smoke or smelliness, please remove the charger and battery immediately, be aware of getting scalded.
  • WARNING Do not use the printer near petrol station, fuel depot or other inflammables.
  • NOTE The print head is still heated, do not touch it after the printing process.
  • NOTE Please choose the original label papers, or poor printing effect and printer platen roller damage can result.
  • NOTE Please take out the battery and store it separately for long term storage, or it may cause battery failure even the leakage, which may damage the printer.
  • NOTE Before replacing the battery, please make sure the printer turns off, or power supply is disconnected if you use a charger.

Maintenance

  1. Cleaning for exterior and paper bin: Wipe exterior of printer and interior of paper bin softly, with water-dampened cloth.
  2. Cleaning for platen roller: platen roller must be cleaned regularly, especially when the printing quality declines, the cleaning method is as following
    Cleaning for platen roller

Please scan QR Code for user’s manual in other languages.

Documents / Resources

| DETONGER DP23L Portable Bluetooth Thermal Label Maker [pdf] User Manual
DP23L, Portable Bluetooth Thermal Label Maker, DP23L Portable Bluetooth Thermal Label Maker, Thermal Label Maker, Label Maker, Maker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals