MADISON PARK Aspen Square Storage Ottoman Bench Instruction Manual
- June 17, 2024
- MADISON PARK
Table of Contents
MADISON PARK Aspen Square Storage Ottoman Bench
Important safety instructions
- Please read carefully all instructions before assembly.
- For your safety and ease, assembly by two or more adults is recommended.
- Keep instructions for future use.
Pre-assembly
- Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
- Take out all parts and hardware from the box.
Parts List
Hardware List
DISCLAIMER
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. THE SELLER IS NOT LIABLE FOR ANY DAMAGES RESULTING FROM THE ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures
Step 1:
Assemble the chair on a flat, soft surface such as a carpet or cloth to
prevent scratching the finish. To locate the hardware, please turn the chair
upside down, you will find the components beneath the fabric cover that is
secured by a zipper underneath the seat cushion. Legs and hardware boxes could
be located beneath the fabric cover.
Step 2:
Attach the Front Legs (P1), Right Back Leg (P2) & Left Back Leg (P3) to the
Chair (P4) as shown below. Tighten all the bolts and close the black fabric.
- (H1)x12 Bolts 5/16″x 1″
- (H2)x12 Lock Washers 5/16″
- (H3)x12 Flat Washers 5/16″
- (H4)x1 Alen Wrench
Step 3:
Turn the assembled chair to an upright position. The assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY:
- BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
- THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY AND ENSURE STABILITY.
Thank you for your purchase