PATCHSKY SZBT4812XEST 8-Pin Bluetooth 4.2 Audio Receiver User Manual

**PATCHSKY SZBT4812XEST 8-Pin Bluetooth 4.2 Audio Receiver User Manual

**

Specifications

Bluetooth Version: Bluetooth 4.2
Frequency Range; 2.40Hz
Output Power Category: Clam 2
Powers Claw: Class 2
Bluetooth Mode: A 2DP/AVRCP/APTOUAPT-X LL
Bluetooth Range: up to 30 Feet

Product Diagram

1. MF button: Power On, Pause/Play, Disectinect, Eliminate Paired list
2. Indicators
3. Lightning Port

Compatible audio speaker models

BOSE Sound Dock: 415209;
BOSE Sound Dock: In JBL:MS302GM;
PHILIPS :D511553/93:

Power On

Place BT4812 onto the Lighting Port of the Speaker, BT4812 will power on automatically to start pairing mode and red/blue indicator will flash alternately

Power Off

When BT4812 is not connected or paired for 10 minute sat will automatically power off, and indicator will go off.

Paring

1. Insert BT4812 onto the Lighting port of the speaker, BT41112 will start Pairing mode automatically.
2. Search Bluetooth don cc to find BT4812 via your mobile phone, and click to pair with it.
3. The LED stays blue, that is, BT4812 successfully pair with your mobile phone.
4. Some mobile phones need to key in “0000” as the needed pairing password

Play

After B T4812 **paired with your mobile phone, the indicator stays blue Alien you can play your favorite music and enjoy it

Disconnecting

When BT4812 is paired with your mobile phone, long press the be button for 3 seconds to disconnect it with your mobile phone, and BT4812 will automatically be on paring mode, and red/blue indicator will fast flash alternately.

Automatically Pairing

1. If the blue tooth receiver paired with the mobile phone or other Bluetooth device, it will automatically pair with the paired Bluetooth device when it is powered on.
2. When BT4812 is paired with your smart phone and on play status, if your mobile phone is beyond 10 meters distance from BT4812, BT4Sl2will disconnect automatically If it is within, BT4812 will pair automatically. Bluetooth Function is on]
3. When the device is powered on, short press the MY button to reboot to automatically pair with the last paired device.

Eliminating the paired list.

1. When BT4812 is on status, press the MF button for 5 seconds till the red and blue LED light flash for 1 second simultaneously, then BT4812 will eliminate all its pair records

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>