VEGA Z20 RGB Optical Mechanical Gaming Keyboard User Guide
- June 6, 2024
- VEGA
Table of Contents
VEGA Z20 RGB Optical Mechanical Gaming Keyboard User Guide
INSIDE THE BOX
GETTING START YOUR Z20 GAMING KEYBOARD
INTRODUCTION
(A) “E” game mode Key
(B) Programmable Macro keys
(C) Magnetic Approach Palm Rest
(D) EVGA Time-of-Flight Sensing System
(E) EVGA RGB Light bar
(F) 3.5mm Audio Jack
SETTING UP YOUR Z20 ELITE GAMING KEYBOARD
Using Your Z20 ELITE Gaming Keyboard
The Follow these steps to create an Macro Recording:
- Press the key combination ( FN + ALT )to start recording.
- The CAPS LOCK Indicator will light up to show that the device is ready to record.
- Type in the keys you want to record.
- Press the key combination to stop the recording. The CAPS LOCK Indicator will start blinking to show that the device has stopped recording and is ready to save the macro.
- Press the desired key (E1~E5) where you want to save your macro.
TRADEMARK & COPYRIGHT INFORMATION
Trademark & Copyright Information
2000-2020 EVGA Corp. EVGA, the EVGA logo and combinations thereof are
trademarks of EVGA Corp. All brand names, company names, service marks, logos,
and trademarks of the company, or its affiliates or licensors are trademarks
or registered trademarks of the company or its subsidiaries, affiliates or
licensors in the US and other countries. Other company, products and service
names may be trademarks or service marks of others. EVGA reserves the right to
terminate this license if there is a violation of its terms or default by the
Original Purchaser. Upon termination, for any reason, all copies of Software
and materials must be immediately returned to EVGA and the Original Purchaser
shall be liable to EVGA.com CORP for any and all damages suffered as a result
of the violation or default.
Legal Information
All material including but not limited to, text, data, design specifications,
diagnostics, graphics, logos, reference boards, files, images, drawings, and
software including this document and the software itself (together and
separately) is owned, controlled by, licensed to, or used with permission by
EVGA Corporation and is protected by copyright, trademark, and other
intellectual property rights. All is being provided “as is”, EVGA Corporation
makes no warranties, whether express or implied, statutory or otherwise with
respect to the materials and expressly disclaims all implied warranties of
non-infringement, merchantability, and fitness for a particular purpose. In no
event shall the liability of EVGA Corporation for claims arising from the use
of the materials by anyone exceed the original purchase price of the materials
(or replacement of the materials at EVGA Corporation’s option). All
information furnished is believed to be accurate and reliable. However, EVGA
Corporation assumes no responsibility for the consequences of use of such
information or for any infringement of patents or other rights of third
parties that may result from its use, or use of the Software. No license is
granted by implication or otherwise under any patent or patent rights of EVGA
Corporation except as expressly provided herein. All specifications mentioned
in this publication are subject to change without notice.
WEEE
This product must not be disposed of with your other household waste or treat
them in compliance with the local regulations or contact your local city
office, your household waste disposal service or the shop where you purchased
the product.
COMPLIANCE INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit die rent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications to this
equipment not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Industry Canada STATEMENT:
This device complies with RSS standards of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CE Compliance Information
Generic Radiation Interference Standard for Information Technology Equipment.
(EN 55022: 2006, Class B), (EN 61000-3-2: 2006), (EN 61000-3-3: 1995 + A1:
2001 + A2: 2005). Warning: This is a Class B product. In a domestic
environment this product may cause radio interference in which case the user
may be required to take adequate measure. Generic Immunity Standard for
Information Technology Equipment. (EN 55024: 1998 + A1: 2001 + A2: 2003).
E009-00-000303
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>