Chinsion CP-NS01 Bluetooth Adapter User Manual
- June 6, 2024
- Chinsion
Table of Contents
CP-NS01 Bluetooth Adapter
User Manual
Qualcomm aptX™ Low Latency
Bluetooth Adapter for Nintendo Switch& Switch Lite
Package Contents
About your CP-NS01:
Button P1/P2: Press to connect the Headphones/Earbuds or toggle internal Mic
On/Off Green=Connected with Mic Off
Led P1&P2: Orange=Connected with Mic On Flashing Green=Connecting or Pairing
Code LED: Off=SBC / Blue=aptX / Orange=aptX Low Latency
Setting:
- Turn on the Nintendo Switch.
- Connect the CP-NS01 Adapter with Nintendo Switch via the USB-C port.
- Once CP-NSO1Adapter is connected with the Nintendo Switch, there will be USB/Speaker Icons appeared on the display of Switch, LED indicators
- CP-NS01 is ready for pairing and connecting with your Headphones/ Earbuds once the LEDs start flashing.
- For in-game voice chat, once the Headphones/Earbuds were connected, press the P1/P2 Button to toggle the Internal Mic ON/OFF, when the internal Mic is off, P1/P2 LED is green, when the Internal Mic is on, P1/P2 LED is Orange.
Connecting to 1 Pair Bluetooth headphones
- Upon powering on, CP.NS01 will start painting mode automatically.
- Make sure the Bluetooth Headphones/Earbuds are in painting mode.
- Keep the headphones close to the CP.NS01 during initial painting.
- If the pairing fails, the lights will go out.
- Once connected then the P1 LED will be Green and Headphones/ Earbuds will start receiving audio from the Nintendo Switch or Switch Lite
Connecting to 2 Pair Bluetooth headphones
- Pair and connect to the 1st set Headphones/Earbuds, P1 LED will be Green, for details pls refer to the last page.
- Pair and connect the 2nd set of Headphones/Earbuds by pressing the P2 button for 3 seconds
- Keep the 2nd set of Headphones/Earbuds close to CP-NS01 during the initial pairing
- Once 2nd set of Headphones/Earbuds was connected, then P2 Led will be Green, and Headphones/Earbuds will start receiving audio from the Nintendo Switch.
- Both 2 Pair Headphones/Earbuds will start receiving audio from the Nintendo Switch.
Reconnecting to previously paired headphones
Automatic re-connect
When a previously paired Headphones/Earbuds was turned on, it will automatically reconnect to the CP NS01
Manual re-connect
You may also initiate a re-connect manually by pressing either the P1or P2 button the corresponding previously paired 1st or 2nd headphones will be re- connected respectively
In-game Voice Chat
- Make sure one or both headphones are pared and connected to the CP NS01
- Press the P1/P2 button to toggle the internal Mic On/Off When the internal Mic is Off P1/P2 LED is Green When internal Mic is On P1/P2 LED is Orange
Factory Reset
- Turn on the Nintendo Switch or Switch lite and unlock it
- Connect the CP NS01 Adapter with Nintendo Switch or Switch lite via the US8 C port
- Press and hold both P1 and P2 buttons for S seconds until all LEDs start flashing
TV Mode
The CP. NSO1 can be used with the Switch TV dock, Simply plug the bundled US8BC TO USB – An adapter to the TV Dockside USB A port, Then insert the CP NS0 into the USB A TO USB-C Adapter is ok.
Protective case use
- If you’re not using a protective case for Nintendo Switch, then pls use the CN NS01 with its Silicone case, the fitting will be perfect.
- lf you’re using a protective case for the Nintendo Switch, and the wall thickness of the Nintendo Switch Protective Case is less than 2.2mm, then pls also use the CN NSO1 with its Silicone case yOu will find the fitting is also perfect.
- If you’re using a protective case for Nintendo Switch, and the wall thickness of the Nintendo Switch Protective Case is more than 2 2mm, then pls do not use the CN NS01Silicone case cause the space is not enough.
LED Indicators
| LED | Status |
|---|
P1 Codec P2
| Powering up| LEDs flashing from left to right
off/standby| All LEDs Off
P1 Pairing| P1&Codec LEDs Flashing alternately
P1 Connecting| P1 LED Flashing
P2 Pairing| P1&Codec LEDs Flashing alternately
P2 Connecting| P2 LED Flashing
P1 Connected and Internal Mic Off| P1 LED Green
P1 Connected and Internal Mic ON| P1 LED Amber
P2 Connected and Internal Mic Off| P2 LED Green
P1 Connected and Internal Mic ON| P2 LED Amber
Audio streaming in SBC| Codec LED Off
Audio streaming in aptX| Codec LED Blue
Audio streaming in aptX Low Latency| Codec LED Amber
LED Off
Colored-line-box-LED on
Dashed box-LED flashing
Product Specification
Electrical
specifications| input| TYPE-C
---|---|---
Operating Voltage| 4.8-5,2V Type
Operating Current| 80+/-20mA Type
Operating Temperatre Range| 0-45
Bluetooth
specifications| Bluetooth version| Bluetooth 5.0
Operating Frequency| 2402-2408MH
Supported Bluetooth Profiles| A2DRHIFP
Supported Codecs| apt) 1.4aptX,513C
Operating Range| Up to 10 meters lite of sight
Safety Instructions
- Do not use this device in medical facilities, aircraft, refueling points, close to automatic Doors, automatic fire alarms, or other remotely controlled devices.
- keep this device at least 2O cm from pacemakers and other medical devices as Bluetooth signals may interfere with their operation.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.