FURUKAWA 24GMMR20 24GHz Multi Mode Radar User Manual
- June 6, 2024
- Furukawa
Table of Contents
FURUKAWA 24GMMR20 24GHz Multi Mode Radar
Date: February 22, 2021
File name: 24GMMR20_User Manual_rev3
Document No.: RA21EX005
24GHz High Resolution Multi-Mode Radar
Furukawa’s new 24-HR-MMR radar will improve safety, comfort of passengers,
and will provide pedestrian protection function to automotive.
Product Features
- Small dimensions
- Behind bumper installation
- Low power consumption
- Multi-mode operation for plural applications
- Automotive interface with warning information and /or target lists
Operating temperature： －40℃~＋85℃
Operating voltage： +8V~+16V(typ.12V) ※Vehicular battery power
Current consumption： 240mA(typ.)＠13.5V ※Depending on operating voltage.
Operating frequency ： 24.15GHz
BSM System
The Blind Spot Monitoring(BSM) system is designed to assist the driver by
monitoring the detection areas on both sides of the vehicle to the rear.
BSM will alert the driver to possible vehicles in these areas in certain
situations such as when changing lanes on roads and freeways.
Multi-Mode operation
Regarding car information on the CAN-bus, radar can change its application
mode to fit for the situation automatically.
Application:
Blind Spot Detection
Lane Change Assist
Rear Cross Traffic Alert
FCTA System
The Front Cross Traffic Alert(FCTA) system is designed to assist the driver by
monitoring the detection areas on both sides of the vehicle to the front.
FCTA function is a function of performing a warning to the driver when the
object approaching from the front side satisfy the warning conditions.
Application:
Front Cross Traffic Alert
Intersection Cross Traffic Alert
Sensor Components
The 24GMMR20 sensor consists of the following components:
- Housing: Plastic
- EMC Shield:
- RF and ECU board:
- Radome: Plastic
FCC ID： 2AHE9-24GMMR20
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RSS-Gen Sec 8.4 User manual notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditons:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.