BLANCO 525274 Water Filter Kitchen Tap Instruction Manual
- October 27, 2023
- BLANCO
Table of Contents
BLANCO 525274 Water Filter Kitchen Tap
Instruction
-
Take the filter head with wall-mounting out of the packaging and check that it is undamaged.
-
Remove the wall-mounting from the filter head and fi t at an appropriate place with screws Ø 5 mm (not included in the delivery scope).
-
Fit filter head to wall-mounting.
-
If an „installation plate“ is enclosed, mark the date (month/year) of initial installation and stick on the filter head.
-
Observe the direction of flow.
-
Fit the water intake and water outlet hose to the filter head (max. 15 Nm).
-
Connect water outlet hose to the equipment.
-
Shut off mains supply (water intake).
-
Connect water intake hose to mains supply.
-
Open mains supply and check system for leaks.
-
No water should leak out, even without an installed BLANCO filter cartridge and with an open mains supply! If necessary, check installation!
-
The filter head must not be under mains water pressure for a long time without a filter cartridge screwed on.
-
Installation of a new filter cartridge -> installation and operating instructions BLANCO filter cartridge.
BLANCO GmbH + Co KG Service
Tel.: +49 7045 44-81 419 info@blanco-germany.com
www.blanco-germany.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>