ANNSO S500 Wireless Bluetooth Headset User Manual

ANNSO S500 Wireless Bluetooth Headset User Manual

What’s in the box

• Wireless Headset

• 3x Ear Tips
  

• Micro USB Cable

• Carrying Case

Overview

1. Indicator Light
2. Multi-function Button(MFB)
3. Micro USB Port
4. Volume Up
5. Volume Down
6. Microphone

The Basics

• Power ON/OFF Hold the MFB for 3 seconds
• Answer a call Tap the MFB
• End a call Tap the MFB to end current call
• Reject a call Hold the MFB for 2 seconds
• Call back last call Double也p the MFB
• Volume up/down Tap the volume+/-
• Next Song Hold the volume- for 2 seconds
• Prev Song Hold the volume+ for 2 seconds
• Mute ON/OFF Hold the volume+/- for 3 seconds
• Voice assistant Hold the MFB for 2 seconds
• Reconnect The headset will auto reconnect to the last connected device once power on

Pairing

How to pair?

1. Hold the MFB for 5 seconds, the indicator flashes BLUE and RED.

2. Switch on phone’s Bluetooth.

3. Select ”S500″ connect it.

Pair with 2 phones

1. Pair the headset with your phone A.
2. Switch off your phone A’S Bluetooth.
3. Pair the headset with you phone B.
4. Switch on your phone A’s Bluetooth, connect the headset to your phone A manually.

Charge

1. Charge the Bluetooth headset with came USB cable.
2. Make sure it’s fully charged before the first use.
3. To preserve battery lifespan, please be sure the headset is fully charged every 45 days.

Warning

1. Don’t deep in water and avoid dropping.
2. Don’t expose headset to extreme temperature, moisture of electric shock
3. Don’t attempt to open the unit for any reason, don’t attempt to manipulate any electrical components in the unit.
4. Don’t attempt to use it internal components have been exposed to liquid.

Label Position

NOTE : LABLE is too large to be printed on the product, so it is printed in the packaging box and instruction manual.

Technical Specifications

• Chip QCC3020
• Wireless Version V5.0
• Profiles HSP HFP A2DP AVRCP
• Battery Capacity 90mAh
• Talk Time 14 Hours
• Play Time 15 Hours
• Charging Time 2 Hours
• Standby Time 320 Hours
• Weight 0.46 oz
• Connection Range 33 ft/10 m

FCC STATEMENT

This device complies with Part 15 of the FCC Rules

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into  an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>