Shenzhenshi Annso Technology S600 Wireless Headset User Manual

Shenzhenshi Annso Technology S600 Wireless Headset

Overview

1. Indicator Light
2. Muiti-function Button(MFB)
3. Magnetic charging contacts
4. Volume Up
5. Volume Down
6. Microphone
7. Mute/ Voice assistant

The Basics

• Power ON/OFF Hold the MFB for 5 seconds
• Answer a call Tap the MFB
• End a call Tap the MFB to end current call
• Reject a call Hold the MFB for 2 seconds
• Call back last call Double-tap the MFB
• Volume up/down Tap the volume+/-
• Next Song Hold the volume- for 2 seconds
• Prev Song Hold the volume+ for 2 seconds
• Mute ON/OFF Hold the Mute fo『0.2 seconds
• Voice assistant Hold the MFB for 2 seconds
• Reconnect The headset will auto reconnect to the last connected device once power on

Pairing

How to pair?

1. Hold the MFB for 5 seconds, the indicato『flashes BLUE and RED.
2. Switch on phone’s Bluetooth.
3. Select “S60。”， connect it.

Pair with 2 phones

1. Pair the headset with you「phone A.
2.  Switch o忏you『 phone A’s Bluetooth.
3. Pair the headset with you「phone B
4. Switch on your phone A’s Bluetooth, connect the headset to you「phone A manually.

Charge

1. Cha「ge the Bluetooth headset with came USB cable.
2. Make sure it’s fully charged before the fi『st use.
3. To preserve battery lifespan, please be sure the headset is fully cha「ged every 45 days.

Warning

1. Don’t deep in wate「 and avoid dropping.
2. Don’t expose headset to extreme temperature, moisture o「electric shock.
3. Don’t attempt to open the unit for any 「eason, don’t attempt to manipulate any electrical components in the unit.
4. Don’t attempt to use it internal components have been exposed to liquid.

Label Position
NOTE: LABLE is too large to be printed on the product, so it is printed in the packaging box and instruction manual

Technical Specifications

• Chip QCC3020
• Wireless Version vs.o
• Profiles HSP H FP A2DP AVRCP
• Battery Capacity 150mAh
• Talk Time 24 Hours
• Play Time 25 Hours
• Charging Time 2.5 Hours
• Standby Time 2.5 Hours
• Weight 0.46 oz
• Connection Range 33 ft/10 m

What s in the box

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. .Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>