Mei Shun He Electronic CP022 All-In-One Wireless Charger Station User Manual

Mei Shun He Electronic CP022 All-In-One Wireless Charger Station User Manual

Docksy Anatomy

Safety Warnings and Legal Information

• Do not dissasemble Docksy
• Keep Docksy away from wale「 and out of extreme heal
• Keep Docksy away from strong magnetic fields
• Use the proper power adapter (9V. 1.67 A o「 above)
• If Docksy overheats, remove your phone and unplug devices immediately. Docksy may shut off on its own if ii becomes too hot. Wait until Docksy is completely cooled off to use Docksy again

Docksy complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Caution: Changes or modifications not explicitly approved by the party responsible for compliance could void the authority of the user to operate this device

NOTE: Docksy has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur. If Docksy does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user 1s encouraged to try to correct the interference by trying one or more of the following measures:

• Reorient or relocate the receiving antenna
• Move the equipment and the receiver further apart from one another
• Plug the equipment into an outlet on a different circuit from the one that the receiver is connected to
• Consult a technician

Operate Docksy

Install Docksy

(Wall adapters, AirPods® and Apple Watch® charging cables not included with Docksy.)

1. Use a 1 ft, 3 ft or 6 ft Apple Watch® charging cable
2. Remove Docksy’s tower to reveal built-in USB ports
3. Place the charging cable in the provided opening and plug into one of the USB ports
4. Plug the standard Lightning® cable into other USB port and hide the excess cable inside the tower
5. Place the head of the Lightning® cable through the opening in the provided cover.
6. Plug the hub into a wall outlet with the provided USB-C cable

Wireless Charging

• Use a wall adapter o「 USB port that is 1A – 2.4A for optimal charging speeds.
• We recommend against using any USB ports that produce under 1A.
• Use only USB-C cables to power Docksy.
• Use computer USB ports under 1A.

Troubleshooting

• If you are experiencing issues with wireless charging, make sure your phone is centered on the charger (See image above)
• If you are experiencing slow charging, be sure to use a USB port or a wall adapter that is rated for 1 A or above (2.4A max)
• Computer USB ports are typically under 1A

Product Specs

Package contains: 3-in-1 Accessories Charger (1), USB-C to
USB-A cable (1), User Manual (1)
Wireless charger compatibility: iPhone X, iPhone 8 Plus,
iPhone 8, Samsung Galaxy S8, & Note 8 and Newer.
Input: 9V 2A USB-C Port
Output: 5V /0 .SA for USB 1,  5V/0.5A for USB2
Wireless Output: 5W/7.5W/ 10W
For Max Charging Speed Use: 2.4AAC Adapter
Product Weight: 0.74 lbs
Product Dimensions: Sin x 6in x 4in
Apple Watch® cable is not included. Docksy will only charge through cases 5MM thick or less

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>