GAINT 410000123 RideDash Plus E-Bike Cycling Computer User Guide
- June 6, 2024
- GAINT
Table of Contents
RideControl Plus
Quick Start Guide
Content
The complete RideControl Plus set includes:
Specification
| Category | Description |
|---|---|
| Physical Size | 603815mm (LWH) |
| Weight | 24g (incl. CR2032 battery) |
| Radio Frequency | 2.4GHz ANT™ |
| Transmission Range | 3m |
| Operating Temperature | -10 ℃~60 ℃ |
| Water Resistance | 1m |
| Battery | CR2032 Lithium Battery |
| Battery Life Time | Up to 100 Hours of Operating |
**Data field icon Description
**
| Riding Time| ****| E-bike Battery %
---|---|---|---
| Heart Rate| | E-bike Battery Bar
| Cadence| | Remaining Range
| Power| | ODO
| Distance| | Auto Mode
Button Function (more detail in Getting started section)
- Previous Data Field · Clear current data
- Wake up Enter setting mode
- Next Data Field
How to Setup
Please insert the CR2032 battery into the computer before activating
RideControl Plus.
A. Wake up
- Press the central button.
B. Pair with your E-bike via ANT+
- Turn on E-bike power, and wake up RideControl Plus computer.
- Recommend: Take E-bike away from another ANT+ signal to avoid RideControl Plus finding another sensor.
- Press Reset Button on the backside to enter pair mode. The screen will show “Pair” when RideControl Plus finds E-bike.
- Auto search: don’t need to pair with the same E-bike next time waking up RideControl Plus.
C. Setting wheel circumference
- Wheel circumference setting is not necessary when pairing with an E-bike system. When using a speed sensor on a regular bike, please set wheel circumference.
- To enter setting mode, it’s not necessary to connect to E-bike, you can operate solely with RideControl Plus.
- Press the right button to the remaining range/distance/odo data field.
- Press and hold the central button for 2 seconds to enter setting mode.
- When seeing “LEN” on the upper screen, press and hold the central button for 2 seconds. The screen will show “SEt”. Press left and right buttons to adjust wheel size.
- After setting, press the central button to confirm and the computer will remain in setting mode. If not confirmed by the user, the system will automatically set and go back to the original data field after 2 seconds.
D. Setting metric/imperial unit
- To enter setting mode, it’s not necessary to connect to E-bike, you can operate solely with RideControl Plus.
- Press the right button to the remaining range/distance/odo data field.
- Press and hold the central button for 2 seconds to enter setting mode.
- After the wheel size setting, when seeing “Unit” on the bottom screen, press and hold the central button for 2 seconds. The screen will show “SEt”. Press the left and right buttons to adjust the unit.
- After setting, press the central button to confirm and the computer will remain in setting mode. If not confirmed by the user, the system will automatically set and go back to the original data field after 2 seconds.
How to operate
A. Assist level
- Upper screen will show L1 to L5 which corresponds to E-bike assist level.
- Upper screen will show “A” when switching to Smart assist mode. (GIANT E-bike only)
B. Clear current riding record
- Press and hold the left button for 3 seconds.
C. Sleep
- RideControl Plus will enter Sleep mode 90 seconds after not receiving a signal from E-bike.
Warranty
Giant warrants for the original owner of the RideControl Plus (incl. mounting kit) to be free from defects in material and workmanship for the period of two years from the date of purchase. Please note: batteries are excluded from warranties. This warranty applies only when the RideControl Plus is purchased new from an Authorized Giant Dealer.
www.giant-bicycles.com
Giant and its symbol are trademarks of Giant.
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>