brilliant IDEAS BIGLTMSE Wireless Glitter Mouse Instruction Manual

brilliant IDEAS BIGLTMSE Wireless Glitter Mouse

Warranty Information

110-day Limited Warranty
Territory: the United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER
This product as supplied and distributed new by an authorized retailer is wan·anted by Southern Telecom, Inc. to the original consumer purchaser against defects, in materials and workmanship (“Warranty”) as follows;

TD obtain warranty service

• Visit our customer support portal: customersupport123.com
• Select the brand and model of your device
• Select ·service Request” and fill out the form to begin your inquiry
• Exchanges require dated proof of purchase from an authorized retailer

Your product will be repaired or replaced, at our option, for the same or similar model of equal value, it examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier:

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification including software modifications such as the installation of custom firmware. This warranty is voided in the event any unauthorized person opens, alters, or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL A PPLY. THE DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM O ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT THE DISTRIBUTOR’S SOLE DISCRETION – ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL THE DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT. INDIRECT. SPECIAL. PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS BUT NOT LIMITED TO. DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA, OR RECORDS) CAUSED BY THE USE. MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, THE CONSUMER’S RECOVERY AGAINST THE DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND lS NOT TRANSFERABLE.

some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to YoU. This warranty gives YoU specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies

Before You Begin

In the Box

• Wireless Mouse (xl)
• Mouse USB Receiver (xl)
• User Manual (xl)

Mouse Tech Specs

• Size: 114 K 55 x 40 mm
• Weight: 94.7 grams
• Material: ABS
• Connection: 2.4 G
• interfile: USB
• Application system: Win 7/8/10/)(P. macOS

caution

To ensure safe and proper use, read all safety information before using the device. Only use with manufacturer-approved batteries. chargers, accessories. and supplies.

• THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
• Keep the device away from strong magnetic fields.
• Do not expose the unit to extreme temperatures Cheat or cold), open flames. humid, or wet conditions.
• Do not allow the USB ports, power jack or other inputs of the device to be exposed to dust

Rating Label Defination

• Direct current symbol.
• This symbol represents FCC Declaration of Conformity end compliance.

Installing batteries

1. Remove the battery cover from the bottom of the mouse.
2.  Install two (2) new AAA-sized Alkaline batteries (not included) , following t he polarity(+/-) diagram in the compartment. Do not mix old and new batteries, or mix different brands or types of battery.
3.  Replace the battery cover.Remove the battery cover from the bottom of the mouse.
4.  Install two (2) new AAA-sized Alkaline batteries (not included) , following t he polarity(+/-) diagram in the compartment. Do not  mix old and new batteries, or mix different brands or types ofbattery.
5.  Replace the battery cover.

Setting Up

Plug the included USB receiver into any of the USB ports (Type-A) on your computer or laptop.

Make sure that the line D of sight between the mouse and the USB receiver is clear. USS The mouse does not  require any special  installation or software. Your computer should automatically detect  and install the mouse. If your computer does not automatically connect to the mouse, try restarting your computer or checking the devices settings in your computer’s Settings or System PrehtNncu panel.

FCC information

This device complies with Part 15 of t he FCC Rules.

caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installatio n. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ocx::ur in a par ticular installation. If this equipment does cause harmf ul interference to radio or television reception, which can be determined by turning the equipment off and o n, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an out let on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject lo the following two conditions: {1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Radiation Exposure infomation
This device has been evaluated to meet general RF exposure requirements, The device can be used in Portable exposure conditions w it hout restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>