Zhongshan Bafangtong Commerce G6-WT Smart Lock User Manual
- June 6, 2024
- Zhongshan Bafangtong Commerce
Table of Contents
Bafangtong Commerce G6-WT Smart Lock
User Manual
The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play.
|
---|---
https://play.google.com/store/apps/details?id=com.tongtongsuo.app|
https://itunes.apple.com/cn/app/id1033046018
System restore factory settings
Option 1:
While smart lock power-on within 6 seconds, firstly press Open and then
press the Close button together on the rear panel for 6 seconds with
sounds ‘verify administrator ’, press 000 # on the front panel to confirm.
Option 2:
From software click ‘Settings’, and then click ‘Delete’.
Registration and Login By App
TTLock users can use their phone number and email to register their accounts.
Currently, TTLock App has supported the phone number registration in 159
countries and regions.
When users are registering their accounts, the verification code will be sent
to the mobile phone or the email address. After the verification is passed,
the registration is successful, and then the page will jump directly to the
home page.
There is no lock or key data in the user’s account when TTLock App is used for the first time. The user can add a lock to the front page. If A lock is already added to the account, the lock information will be displayed.
Add Lock By App
Send Key By App
After adding the lock successfully, the user has the highest authority of the
lock, which is the administrator of the lock.
The user can send the Bluetooth key to others by setting the time limit and
has the right to select the limited time, permanent, or one-time Bluetooth
key. The key is sent to the recipient’s mobile phone or email and the
recipient will get the key and authority of the lock in the TTLock App.
Administrators can manage all the keys they send out, including clearing keys,
resetting keys, sending keys, adjusting the time limit of the keys, and
viewing the access records.
Add Users By App
In the main interface of the TTLock App, select Passcodes or IC Cards, and click on the upper right to add passcodes and IC cards. You can add users for a limited time or permanent access. The access records can be queried in the main interface.
For example: add passcodes
Passage Mode
In the main interface of the app, select the passage mode in the settings, and
the date of the passage mode can be set, and the start time and end time of
the passage mode can also be set. After the passage mode is activated,
everyone can directly unlock the door without any access permission.
The passage mode can be turned off by clicking again.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>