ULTIMATE HEALTH PLANS ULT291 10 GO Edition Ultimate FU Smartphone User Guide
- June 6, 2024
- ULTIMATE HEALTH PLANS
Table of Contents
ULTIMATE HEALTH PLANS ULT291 10 GO Edition Ultimate FU Smartphone User Guide
PRODUCT HEX-VISION IMAGE
POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a non-standard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card
does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting>Network&Internet>Mobile network >Preferred network type
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings>Network&Internet>Wi-Fi When WLAN is on,
a list available WiFi connection will appear. Click on the one you want to
connect to, enter the password if the network isencrypted, then click Conned.
When it’s a public network, just click Connect When the network shows
“connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected
devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button
then select “Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on the screen. Click on the one you want to pair
with, then click “Pair” on the dialog pop-up. Documents are available for
transmission after Bluetooth pairing.
Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to
turn on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot,
enter your user name in “Network Name” and password, then click Save. Another
device can use the WLAN hot-spot by searching and entering the password of the
password.
Reminder:
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully. The signal of the WLAN hot-spot depends on the signal strength
and devices
CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. Ultimate holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications fail to work properly.
Please prevent the device or the battery in extreme cold/hot condition. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by figgers.lncompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones.
Please do not place the battery or the phone onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating.
SPECIFICATIONS
BASIC INFORMATION
Model: Ultimate FU
Operating System: Android 10 (Go edition)
CPU: MT6737VNV
GPU: ARM Mali T720-MP1 650MHz
RAM: 2GB
ROM: 32GB
Battery: 4150mAh
Display
Screen Size: 6.53 inch
Resolution: 1600×720 Pixels
Touch: Capacitive multi-touch
Cameras
Rear Camera: 13MP+2MP+8MP Camera
Front Camera: 8MP Camera
Connection(I/0)
Band: GSM850;PCS1900 WCDMA B2/4/5 LTE Band 2/4/5/7/17
SIM/TF card: Dual NANO SIM and TF
WIFI: IEEE802.11 a/b/g/n/ac
Bluetooth: Bluetooth 4.0
GNSS: GPS
FM: Yes
Earphone Port: 3.5mm
USB Port: Type-C
Other Features
Video File Format: 3GP/MPEG4,etc.
Audio File Format: WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc.
Card Extend: Support TF card up to 256 GB
Language: Support Multi-language
Sensor: G-Sensor, P-Sensor, L-Sensor, Compass, Gyroscope
In the box
- lx Phone
- lx Screen Protector (pre-applied)
- lx Phone Case
- lx Type-C Cable
- lx Power Adapter
- lx SIM Tray Ejector
- lx Quick Start Guide
Android is a trademark of Google LLC.
Follow ultimate community.a place where you can share and discuss with
ultimate user.
keep.posted.with.the.mostup-to-day news.
chooseultimate.com
1244 Mariner Blvd
Spring Hill, FL 34608
chooseultimate.com
Phone: 352-835-7151
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested
frequency bands, although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below the
maximum value. Before a new model phone is a available for sale to the public,
it must be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC, tests for each phone are performed in
positions and locations as required by the FCC.
For body worn operation, this model phone has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory that contains no metal and that positions the
handset a minimum of 10mm from the body.
Non-compliance with the above restrictions may result in violation of RF
exposure guidelines.
Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valu- able time and developing hardware, software & other developments. Thanks for choosing Ultimate products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with better user experience.
Scan following QR-codes to follow us and enter giveaway to win a ultimate smart device for free!
Ultimate Health Plans Corporate
1244 Mariner Boulevard
Spring Hill, FL 34609
Phone: 352-835-7151
chooseultimate.com