Haier HRZ-322 339L Vertical Refrigerator Installation Guide

Vertical Refrigerators

**H R Z-322*
H RZ 322W
H RZ 322G
H RF322VW**

Installation  Instruction and User Guide

Warnings

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• It is hazardous for anyone other than an Authorised Service Person to service this appliance. In Queensland – the authorized Service Person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants, to carry out servicing or repairs which involve the removal of covers.
• Children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Please abandon the refrigerator according to local regulators for it use flammable blowing gas and refrigerant.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  This appliance is intended to be used in household and similar applications such as — staff kitchen areas in shops, offices and other working environments; —farm houses and by clients in hotels, motels, and other residential type environments; — bed and breakfast type environments; — catering and similar non-retail applications.

IMPORTANT DISPOSAL INSTRUCTIONS

As responsible retailers, we care about the environment. As such we urge you to follow the correct disposal procedure for your product and packaging materials, This will help conserve natural resources and ensure that it is recycled in a manner that protects the health and the environment. You must dispose of this product and its packaging according to local laws and regulations. Because this product contains electronic components and sometimes batteries, the product and its accessories must be disposed of separately from household waste when the product reaches its end of life. Contact your local authority to learn about disposal and recycling. The product should be taken to your local collection point for recycling.
We apologize for any inconvenience caused by minor Inconsistencies in these instructions, which may occur as a result of product improvement and development.
This refrigerator may contain the flammable refrigerant isobutane it
R600a REFRIGERANT
This appliance may contain a small quantity of environmentally friendly, but flammable, non-synthetic R600a refrigerant:

• Upon opening and installing your product, check that the tubing of the refrigerant circuit is not damaged during transportation.
• Leaking refrigerant may cause eye injuries or ignite.
• The room for installing appliances must be at least lm per 8g of refrigerant. The amount of refrigerant in the appliance can be found on the rating plate the back of the unit.
• Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
• Do not damage the refrigeration circuit. If you are unsure of the refrigerant type check the rating plate on the back of the unit.

 Parts & Features

1. Cabinet
2. Shelves
3. Crisper Cover
4. Crisper Box
5. Adjustable Feet
6. LED Light
7. Door Switch
8. Door Assembly
9. Door Balconies
10. Door Gasket

Installation Instructions

Ventilating

To ensure adequate ventilation for your refrigerator see recommended cabinetry dimensions below. The refrigerator should be positioned 50mm from each wall, and have clear space 50mm above the top of the unit.

Power Supply

To ensure that the appliance is not accidentally switched off, connect your refrigerator to its own PowerPoint. Do not plug in any other appliance at this PowerPoint or use extension cords and double adaptors. Power requirements: 220-240VAC/50Hz. It is essential that the appliance be properly grounded (earthed).

Power Line Cord
Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from 4 the outlet. Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion along its length or at either the plug or appliance end.

Protection from Moisture
Avoid installing this refrigerator in a place where heavy moisture is present, or where it may be directly sprayed with water. Exposure to excessive moisture can create an electrical hazard.

Installation Instructions

Protection From Heat
Your refrigerator should not be located in direct sunlight or next to any heat-generating appliances such as a cooktop, oven or dishwasher.

Positioning
Only install this refrigerator on a stable, flat floor and should it not be laid on soft materials such as foam, plastic. Ensure the unit is stable by adjusting the front feet.

Environment
Do not install this refrigerator near flammable, combustible or explosive materials. Never store volatile or flammable materials in your refrigerator as they may explode.

Moving When fixed or moved, the refrigerator can not be set horizontally or inclined more than 45° or upside-down.

Safety& Warnings

• Ensure the voltage in the power socket is the same as the rated voltage of this appliance.
• Water and condensation may gather inside the refrigerator cabinet, and form a layer of frost. This will be evaporated during the defrost cycle and will be collected in the drain pan above the compressor.
• If the power supply cord Is damaged, it must only be replaced by your Haier Appliances Authorised Repairer because special purpose tools are required.
• It is dangerous to alter the specifications or attempt to modify this product in any way
• When storing your cleaned appliance, leave the doors open. This allows air to circulate and prevents the build-up of bacteria and molds. Before using again, clean well using a mixture of warm water and baking soda (add 1 teaspoon of baking soda to every 500 ml of water). Rinse with clean water. We recommend you leave your refrigerator operating while you are on holiday.
•  If your refrigerator is turned off for any reason, wait 10 minutes before turning it back on. This will allow the refrigeration system pressures to equalize before restarting.

Changing the reversible door

Door Reversal This refrigerator has been built with the door hinges on the right. If you wish to change the opening direction, follow the instructions below:

1.  Unscrew the two screws ( 8 ) that hold the bottom hinge (5) (right side) to the frame. Take away the bottom hinge (5);
2. Lift the door off the right upper hinge ( 2 ) and place it on a fiat surface to prevent scratching it:
3. Unscrew the two screws ( 4 ) holding the front top panel ( 1 ). Pull and remove the front top panel;
4. Unscrew the screw nut of the right upper hinge bin ( 3 ). Refit the upper right hinge bin ( 3 ) into the left upper hinge ( 10 );
5. Unscrew the left front leg ( 9 ) and transfer it to the right side;
6. Set the door in place, making sure the door seat at the left upper hinge( 10 ) bin;
7. Before placing the bottom hinge ( 5 ), remove the bolt-pin ( 6 ) and reverse the direction of the bottom hinge ( 5 ). Then install the bottom hinge ( 5 ) onto the left side of the lower frame with two screws ( 8 ):
8. Insert the bolt-pin( 6 ) into the bottom hinge ( 5 );
9. While holding the door in the closed position, attach the bottom hinge ( 5 ) onto left side of the bottom frame with two screws ( 8 ), do not tighten the two screws( 8 ) until the top of the door is parallel to the countertop;

FIGURE 1 – REPRESENTS THE POSITION OF COMPONENTS PRIOR TO DOOR REVERSAL.
FIGURE 2 – REPRESENTS THE POSITION OF COMPONENTS AFTER DOOR REVERSAL.

Maintenance

•  The refrigerator should be cleaned and maintained once a month.
• When moving or cleaning, make absolutely sure that the power plug is first disconnected from the power outlet.
• Wipe the inner and outer surface of the refrigerator and its accessories with a damp cloth. If heavily soiled, gently clean with neutral detergent, wipe with a clean damp cloth and allow to dry.
• Do not use hot water, petrol, alcohol, kerosene, washing powder, cleanser, acid, Chemical cloth, etc when cleaning this appliance. Do not spray the cabinet with water, as this may cause an electrical hazard or cause the outer cabinet to rust.
• Clean the door seals regularly to ensure the door doses correctly, and that your appliance functions efficiently.
• When storing your cleaned appliance, leave the doors open. This allows air to circulate and prevents odors. Ensure shelves are cleaned if foods or liquids are spilled to avoid damage.

Troubleshooting

1. hen the refrigerator does not work Check if there is a power failure. Check if the power plug is plugged into the power outlet. Check that the fuse has not blown.
2. When the refrigerator is cooling excessively The temperature control dial may be set too high. If you place foodstuffs containing a lot of moisture directly under the cool air outlets, they will freeze easily. This does not indicate a malfunction.
3. When the refrigerator is not cooling sufficiently The food may be packed too tightly together which will block the flow of cool air. You may have put something hot or large objects into the refrigerator. The door may not have been closed properly. The door gaskets may be damaged. The refrigerator may not be ventilated correctly. There may be insufficient clearance between the refrigerator and the surfaces Immediately both sides and above. The temperature control dial may not be set properly.
4. It defrosting water overflows inside the refrigerator and onto the floor. Check that the drain pipe and the drain hose are not clogged. Check that the drain pan is housed properly.
5. When condensation forms on the outside of the refrigerator. Condensation may form on the outside when the humidity is high wipe dry with a dry cloth.
6. When you hear a sound like water flowing. A sound like water flowing is the refrigerant flowing. It does not indicate a malfunction.
7. When the cabinets side panel heats up The side panel of the cabinet will heat up when the door is opened or closed frequently, when starting the unit and when the unit operates in summer with high ambient outside temperature, In such cases, do not touch the panel, it results from the dissipation of the heat from inside the cabinet, and it does not mean that something is wrong with the refrigerator.

 Technical specifications

•  For detailed technical specifications, please refer to the nameplate at the back of the refrigerator..
• Specifications are subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>