BAUHN AEM-0222 Ergonomic Mouse User Guide

BAUHN AEM-0222 Ergonomic Mouse

Have you got everything

•  Ergonomic Mouse
•  USB-C Charging Cable
•  User Guide
•  Warranty Certificate

Product Overview

•  Left & right buttons
•  Scroll wheel
•  DPI button
•  DPI/channel/charging indicator
•  Desktop button
•  USB-C charging port
•  Bluetooth® 2 indicator
•  Bluetooth® 1 indicator
•  USB indicator
•  Mode button
•  On/off switch
•  Forward/Back button
•  USB receiver (under case)

Operation

Connect with the USB receiver

•  Slide the On/off switch to turn the mouse on.
•  Open the case underneath the mouse and take out the USB receiver.
•  Connect the USB receiver to your computer’s USB port.
•  Press the mode button until on USB mode, the USB indicator will flash red.

Connect with Bluetooth®

• Slide the On/off switch to turn the mouse on.
•  Press the mode button until on Bluetooth® mode, the Bluetooth® 1 and 2 indicators will flash blue and green slowly.
•  Press and hold the mode button until the Bluetooth® 1 and 2 indicators flash rapidly, indicating it is ready to pair.

For Windows

•  Open Bluetooth® devices on your computer and select “add or remove Bluetooth® devices”.
•  Search for AEM-0222 and select “pair”.

For macOS

• Open System preferences on your computer and select “Bluetooth®”.
•  Search for AEM-0222 and select “pair”.

Charging

•  Connect the supplied USB-C charging cable to the USB-C charging port of the mouse and the other end to your power source. While charging, the DPI/channel/charging indicator will light up red.
•  Once fully charged (approximately 6 hours), the indicator will light up green.

Troubleshooting

Cannot connect with USB receiver
Cannot connect via Bluetooth®

•  Ensure the mouse is on.
•  Ensure you are on USB mode, the USB indicator will flash red.
•  Try a different USB port on your computer.
•  Ensure you are on Bluetooth® mode, the Bluetooth® 1 and 2 indicators will flash blue and green rapidly.
•  Ensure your computer’s Bluetooth® is turned on..

Specifications

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

General Safety Warnings

For the safety of yourself and others, follow all instructions and take notice of all the warnings. When adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the product.
WARNING: The RCM is a visible indication of a product’s compliance with all applicable ACMA regulatory arrangements, including all technical and record- keeping requirements.

• Installation and Location
• Location: Make sure the location for the product is well ventilated, and away from damp and cold, protected from overheating and away from direct sunlight, away from moisture drips or splashes and protected from excessive dust or grease.
• Heat: Do not place the product set near heat sources (eg. radiators, stoves, electrical equipment, amplifiers).
• Water: Do not place containers with liquids (eg. vases) or with small metallic objects on top of the product.
• Fire: Do not place any naked flame sources (eg. lit candles, cigarettes) on the product.
• Batteries: When removing or replacing batteries, make sure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery. Please dispose of batteries responsibly by recycling at your nearest recycling center. Children: Supervise young children to ensure they do not play with the product.

Cleaning and Maintenance
Unplug or turn off the product before cleaning it.
Cleaning: Only use a soft, dry cloth for cleaning the product; do not use a damp cloth. Never clean with industrial-strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent, or other chemicals. Wipe off any moisture, dirt, or dust on the power plug pins with a clean, dry cloth.

Recycling and disposal
The National Television and Computer Recycling Scheme were established in 2011 to provide Australian households and small businesses with access to free industry-funded collection and recycling services for televisions and computers, including printers, computer parts, and peripherals. Please dispose of the product responsibly by taking it to a recycling drop-off point. Planet Ark maintains a database of free television and computer drop-off points. Search for recycling near you at: https://[recyclingnearyou.com.au/ewastescheme/](http://recyclingnearyou.com.au/ewastescheme/)

References

• National Television and Computer Recycling Scheme - Planet Ark Recycling Near You

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>