LEDsolutionGP T25-1 Wall Mounted Touch Panel Instructions
- June 6, 2024
- LEDsolutionGP
Table of Contents
LEDsolutionGP T25-1 Wall Mounted Touch Panel Instructions
Features
- Touch panel 4 zone 1-5 color universal RF remote.
- Each zone can be set as single color, dual color(WW/CW), RGB, RGBW or RGB+CCT light type.
- Each zone can remote control multiple 2.4G LED controllers.
- Ultra sensitive high strength glass touch panel with touch color wheel in the middle.
- Smooth and accurate color adjustment by touching the color slide.
- Touch keys with chord tones and LED indicator.
- Free installation, no wiring, removable.
- AAA x 2 attery powered. b
- White & Black glass panel available.
Technical Parameters
Input and Output
Output signal| RF (2.4GHz )
Working voltage| 3VDC AAA x 2 ( )
Working current| ＜5mA
Standby current| ＜20μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Weight
Net weight| 150g
Gross weight| 190g
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment
Operation temperature| Ta: -30 O C ~ +55 O C
Case temperature (Max.)| T c:+65O C
IP rating| IP20
Warranty
Warranty| 5 years
Mechanical Structures and Installations
Installation diagram:
To fix the panel, two options are offered for selection:
Option 1 : fix it on the wall with two screws.
Option 2: adhere it to the wall with paster.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
| Use the controller’s Match key | Use Power Restart |
|---|---|
| Match: | Match: |
| Short press match key, immediately press zone key of the touch panel | Switch |
off the power of the receiver, then switch on power, repeat again.
The LED indicator fast flash a few times means match is successful.|
Immediately short press zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
Delete:| Delete:
Press and hold match key for 5s to delete all match| Switch off the power of
the receiver, then switch on power, repeat again
The LED indicator fast flash a few times means all matched remotes were
deleted.| Immediately short press zone key 5 times on the touch panel. The
light blinks 5 times means all matched remotes were deleted
Key function
Zone light type setting
Each zone can match single color, dual color(WW/CW), RGB, RGBW or
RGB+CCT(WW/CW) controller or lamp.
Touch power key to turn on light, turn off light, firstly long press power key
5 seconds, enter zone light setting: long press Zone 1/2/3/4 key 2 seconds,
select current zone you want to change, then long press below five key 2
seconds to change current zone light type.
: Long press 2 seconds, set current zone as single color type.
: Long press 2 seconds, set current zone as dual color type.
: Long press 2 seconds, set current zone as RGB color type.
: Long press 2 seconds, set current zone as RGBW type.
: Long press 2 seconds, set current zone as RGB+CCT type.
For example, If you want to change zone 1 light type as RGB type, please long press Zone 1 key 2 seconds firstly, then long press 2 seconds will set Zone 1 as RGB type.
When in zone light type setting state, all above long press key operation, the
LED indicator will lighten red and blue.
Short press power key or touch color wheel, quit zone light type setting.
: Turn on/off all zone light
: RGB color / Color temperature.
Press RGB or CCT key to switch between RGB wheel and CCT wheel
: RGB color, 24 levels.
: For dual color or RGB+CCT(WW/CW), adjust color temperature by WW/CW channel,
short press 11 levels, long press 2s get max or min color temperature.
For RGB, adjust color temperature by mix R/G/B channel,11 levels.
For RGBW, adjust color temperature by adjust W channel brightness,11 levels.
long press 2s get 100% or 0% White channel brightness
: Short press play 10 built-in mode, long press 2s run mode-cycle
: For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get
the default speed.
For static RGB color, adjust saturation, namely change current static RGB
color to mixed white slowly, short press 11 levels, long press 1-6s for
continuous 256 levels adjustment.
: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
: Short press replay scene. Long press 2s to save the current color into the scene. 4 zone recall or save synchronously.
Short press turn on zone light and select zone simultaneously, long press 2s
turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple
receivers.
Only multiple zone have same light type can select synchronously
Note:
- For single color, touch RGB/CCT wheel only change brightness, RGB, MODE, SPEED key is unvalid.
- For dual color, touch RGB/CCT wheel only change color temperature, RGB, MODE, SPEED key is unvalid.
- For RGB, when touch CCT wheel, adjust color temperature by mix R/G/B channel.
- For RGBW, when touch CCT wheel, adjust W channel brightness.
- After touch power key to turn off light, long press power key 10 seconds will turn on or turn off tone.
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle remote, beware of falling.
-
For indoor and dry location use only.