SHARK GAMING H70 Shark Receptor Wired Gaming Headset User Manual
- June 6, 2024
- SHARK GAMING
Table of Contents
SHARK GAMING H70 Shark Receptor Wired Gaming Headset
In The Box
-
1 x H70 wired gaming headset
-
1 x Detachable boom mic
-
1 x 2m 3.5mm gold plated mini-jack stereo TPE cable
-
1 x Y-Cable gold plated mic/audio splitter
1 x 2m USB-A to USB-C braided cable -
1 x Fabric mesh carry pouch
-
2 x High-level protein leather ear cups replacements (Left/Right) 2 x Fabric mesh ear cups attached (Left/Right)
-
1 x QR manual card.
System Requirement
- For Software
- Windows 7 / 8 / 10 / 11
- USB 2.0
- At least 256MB storage
- Download link: Shark/FAQ
Features
- Boom mic
- Volume scroll wheel
- Mute on/off
- USB C connector
- Combo 3.5m Mini-Jack connector
Setup
-
Connect a microphone to the headset.
-
Connect via either the included 3.5 mini-jack or USB-C cable
Use the Y-splitter cable if the output device doesn’t support combo mini-jack output. USB-C connection required for virtual 7.1 sound and software control. -
Install optional software
Headset controls
Microphone mute toggle
- The microphone is active when the toggle is in the inwards position
- Microphone is muted in the raised position
Volume wheel
- Rotate up for volume up
- Rotate down for volume down, turning the wheel to furthers downward position mutes the headset sound.
Replacing/swapping the included ear cups.
- Pull from the topside between fabric/PU and plastic holder, then start pulling clockwise until earcup is lose.
- Choose the fabric or PU earcup to place in.
- Align the plastic connectors to the input holes
- Push in from the bottom then upwards on the side areas until earcup is attached
- Repeat above steps for 2. Earcup
Troubleshot
-
No sound in the headset
Check if cables are firmly connected on the headset, and output device
Check if the volume wheel has been turned up. -
No Voice output.
Check if the microphone connection is firmly attached in the correct orientation.
Check if the microphone mute toggle is on. -
Device not connected to the software.
It is recommended to use the included USB-A to USB-C cable.
Check if the cable is connected firmly on both input and output connections
Specifications
Speakers | 50mm neodymium drivers |
---|---|
Speaker sensitivity | 115dB ± 3DB |
Frequency range | 20hz-20Khz |
Impedance | 20Ω±15% |
Microphone sensitivity | -42 ± 3DB |
Microphone direction | Unidirectional |
Weight | 250gram w/o cables |
© Shark Gaming Systems
Shark Gaming Systems reserves the right to make changes to any products
reliability, function, and design.
Shark Gaming Systems does not assume any product liability arising out of it,
or in connection with, the application or use of any product, circuit or
application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering
or relating to any combination system, apparatus, machine, material, method,
or process in which the product may be used.
Warranty
Shark Gaming Systems warrants that its hardware product shall be free from
defects in material and workmanship for the length of the time identified on
the product package beginning from the date of original retail purchase, but
in no instance shall this be less than 2 years This product is safe under
normal and foreseeable operation condition, any changes or modification to the
product that is not expressively approved by Shark Gaming Systems may void the
warranty.
For a complete warranty statement, go to
www.sharkgaming.com
Service
If you are facing issues while using the equipment, check the troubleshot
guide as described herein or contact our customer support at
www.sharkgaming.com or by phone: +45 7734 2776
Waste Electrical and Electronic Equipment (WEEE)
This symbol indicates that this product should not be treated as household waste, instead hand it over to the appropriate point for the recycling of electrical and electronic equipment which will conserve natural resources.
EU Declaration of Conformity
Please refer to the product declaration of conformity on the Shark Gaming Systems website for the applicable CE marks.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received; including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
Shark Gaming Systems A/S Naverland 6, 2600 – Glostrup. Denmark v1.0 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>