Shenzhen Hongxianggu Technology FX330 Little Puffer Robot User Guide

Hongxianggu Technology FX330 Little Puffer Robot
User Guide

Little Puffer Robot

Operation Guide
Accessory:
Indicator Status Description

1. Green Light
   ♦ Slow Flash: STA Mode indicates that the device can add status
   ♦ Quick Flash: STA mode indicates that the network is connecting
   ♦ Stay On: STA mode indicates that the network connection is successful

2. The blue light stays on: it means that the APP is controlling the device

3. Red light flashes slowly indicate the battery is low

The mode guidelines

1. STA Routing WI-Fl mode Move to STA mode, connect the device by router WiFi, you can remote control via wifi in STA mode
2. Hotspot AP mode Move to AP mode and control the device directly via connecting LINKSYS “4 hotspot wifi, and the AP mode is limited to short-range use

Download and install the App

| |
---|---|---
https://play.google.com/store/apps/details?id=com.jk.linksus| https://apps.apple.com/cn/app/linksus/id1537063175| https://www.link- sus.cn/app/LinkSus/downloadguide/download.html

1. Android
   On Android, open the Google store and search “LINKSYS” to download and install the APP

2. Apple
   On Apple: Open the Apple Store to find LINKSYS, download and install the App

Registration decorations (STA mode)

1. The will connection only supports 2.4G Hz wifi, and wifi is not supported currently
2. When connecting the device as close as possible to thi wifi router

Function specifications

AP mode (connect the device hotspot ), you I cannot remote control the device

1. The switch move to the AP mode
2. Connect the device hotspot (LINKSYS ***)
3. Control the device by App

Precautions:

1. The WiFi of the added device can only use 2.4G, and 5G is not currently supported
2. The maximum size of food can’t exceed 12mm
3. Laser light tease the pet automatically 5 minutes at a time, please don’t aim at others in laser mode
4. If Children play, be accompanied by an adult Please
5. The product isn’t waterproof, please don’t use it in water
6. Please don’t drop the device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>