amazon fire T76N2B Wireless Android Tablet User Manual
- June 6, 2024
- amazon fire
Table of Contents
amazon fire T76N2B Wireless Android Tablet User Manual
Product Information
Safety and Compliance Information Using Your Device Around Other
Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
This device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an
uncontrolled environment.
CAN ICES-3(B)/NMB-3(B)
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Products in accordance with your local laws and regulations. For information about recycling the Products, go to www.amazon.com/devicesupport.
Product Specifications
Model Number: T76N2B, T76N2P
Electrical Rating: 5VDC, 1.8A
Operating temperature: 0°C to 35°C
Connectivity: T76N2B –Dual Band Wi-Fi (2.4/5 GHz); 802.11 a/b/g/n/ac; BT
BDR/EDR, BLE T76N2P–Dual Band Wi-Fi (2.4/5 GHz); 802.11 a/b/g/n/ac; BT
BDR/EDR, BLE , Wireless charging RX
Operation Frequency and Maximum Radiated Output Power:
WiFi 2.4GHz (2412MHz-2472MHz): 20 dBm
WiFi 5.2GHz (5180MHz-5240MHz): 23 dBm
WiFi 5.3GHz (5260MHz-5320MHz): 20 dBm
WiFi 5.6GHz (5500MHz-5700MHz): 20 dBm
WiFi 5.8GHz (5745MHz-5825MHz): 14 dBm
Bluetooth (2402-2480MHz): 15.5 dBm
Bluetooth LE (2402-2480MHz): 9.9 dBm