Shenzhen Relight Technology MS-W10 Bonsai Bluetooth Speaker Lamp User Manual
- June 6, 2024
- Shenzhen Relight Technology
Table of Contents
Relight Technology MS-W10 Bonsai
Bluetooth Speaker Lamp
User Manual
MS-W10
Operation Instructions
- Plug in AC Adapter
- Turning the LED light ON/OFF
Light on automatically when plugging in
Touch the LED Brightness Controller again to turn off the light. - Brightness Control
*Slide your finger over the LED brightness controller to dim or brighten the LED Light. - Good Night Mood/Sleep Mode
Touch the LED Brightness Controller for 3-5 seconds to activate Good Night Mood mode/Auto-sleep mode and the light will be turned off automatically within 30 minutes.
Any operation will exit the Good Night Mood/Sleep Mode. - Wireless Charging(apply to partial models)
Place your QI wireless charging enabled Smartphone over the wireless charging pad. Then begin to charge.
The indicator light on pad color will change into ice blue. - Paring Tree of Light
Press “Power Button” until the Bluetooth indicator flashes with a “disconnected” notification sound or a certain sound.
Turn on the Bluetooth function of your devices and scan ‘MS-W10’ out.
Pair to ‘MS-W10’ with ‘connect’ notification sound or a certain sound.
To control the volume and playback via paired device or top pad of Tree of light.
*Click button’+’ or ’-‘ to control volume. Long press’+’ for the next song and ’-‘ for the previous song. The blue indicator light will be off if the Tree of light is not in use for a long time. - TWS function
The mobile phone or device connects 1pc product as the host, press the volume “+” and “-” at the same time, the sound will be prompted, and automatically search for another product. Stop searching after 1 minute.
Turn on another product as a slave. After the slave is connected to the master, the master will prompt the sound, operate any one of the products, which can control the sound function of another product at the same time.
*Press the volume “+” and “-” of the main unit at the same time again, the two products will be disconnected and the sound will be prompted.
Appearance & interface Description
MS-W10
| 1. Play/Pause(Long Press for Bluetooth) | 6. Charging Indicator Light |
|---|---|
| 2. LED Light | 7. Bluetooth Indicator Light |
| 3. Wireless charging pad | 8. Volume – /Previous Song |
| 4. LED brightness controller | 9. Volume + /Next Song |
5. Charge-in port, Type-C
Specification
Model Name: MS-W10 Bluetooth Speaker/Wireless Charger Desk Lamp
Wireless Charging: 5W/7.5W/10W
Brightness: 200lm
Input Voltage/Current: 12V/2A
Conversion Rate: 70-75%
Bluetooth Version: V5.0
Bluetooth Frequency: 2.4GHZ
Bluetooth Profile: A2DP, AVRCP
Packaging Contents
Tree of Light x1
Charging Adaptor x1
*User Manual x1
Working Conditions
Indoor Use Only
Temperature: -40℃~40℃/-40℉~104℉
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products.
- Do not disassemble the product or attempt to fix it.
- Kindly use the original charging cable provided.
- Do not attempt to replace any part of this product or battery inside
- Do not crush, puncture, dispose of in fire, short the contacts or expose the product to water or other liquids.
- Do not store or use the product in a high-temperature environment, including intense sunlight or heat.
- Avoid drops, bumps, abrasions, and impacts.
- If there is any reason to believe that there is damage to the product, discontinue use immediately.
- If you find that the product is too hot, is emitting an odor, or is deformed, punctured or exhibits any suspicious or abnormal behavior, discontinue use immediately and contact our customer service.
- The product is not suitable using for Children.
FCC Warning
Statement Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter.