DS18 TLV6 Portable Party Speaker Owner’s Manual

DS18 TLV6 Portable Party Speaker

WHAT’S IN THE BOX

•  TLV6 Speaker
•  Remote Control
•  User manual
•  Aux In/ FM Antenna Cable
•  AC Power Cable

FEATURES

• Portable 6.5″ 2-Way Bass-Reflex Loudspeaker with RGB LED Lights

• Audio Source:
  BT / USB / FM Tuner / Aux /Mic / Guitar

• Connectivity:
  Bluetooth with TWS (True Wireless Stereo)

• Playing time:
  3.5 hours with Full Power and LED Lights ON (results may vary depending on multiple condi­tions)

• Rechargeable BATTERY
  The Speaker Comes with a Built-in Rechargeable Battery

• Charging time:
  From Low Battery -1 hour (Using AC input) – 2 hours (using 12V input)

Hearing safety

Listen at a moderate volume.

•  Using headphones at a high volume can impair your hearing.
•  Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So after prolonged listening. What sounds “normal” can be loud and harmful to your hearing.
  To guard against this, set your volume to a safe level before your hearing adapts and leave it there.

To establish a safe volume level:

• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly without distortion.

Listen for reasonable periods:

• Prolonged exposure to sound, even at normal “safe” levels, can also cause hearing loss.
• Be sure to use your equipment reasonably and take appropriate breaks.

Notice
Any changes or modifications made to this device that are not expressly approved by Consumer Lifestyle may void the user’s authority to operate the equipment.

OVERVIEW OF THE TOP CONTROL PANEL AND THE REMOTE CONTROL

1.  AUX input 3.5mm jack
2.  USB port
3.  Previous button
4.  Next button
5.  Tone button
6.  Play/ Pause button
7.  Volume down – button
8.  Guitar jack
9.  Microphone jack
10.  Lighting switching button
11.  Standby button
12.  Menu button
13.  Mode switching button/ TWS function
14.  Volume up+ button
15.  FM presents up
16.  FM presents down
17.  Auto-scan present memory FM stations
18.  Mute
19.  Bass EQ effect

OVERVIEW OF THE REAR PANEL

GET STARTED

Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.

CONNECT POWER

Caution

•  Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on back or the underside of the unit.
•  Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
•  Before you connect the AC power cord, make sure that you have completed all other connections:

PREPARE THE REMOTE CONTROL

To insert the remote control batteries:

1.  Open the battery compartment.
2.  Insert 2 x AAA batteries with correct polarity (+/-) as indicated. The 2xAAA battery not include in our products, please purchase from Authorized Seller.
3.  Close the battery compartment.

Please Note: If you are not going to use the remote for a long time, remove the batteries. Do not use old and new or different type of batteries in combination.  Batteries contain chemical substances, so they should be disposed of properly.

TURN ON/OFF THE SPEAKER

The speaker can work with either connected AC power input (AC mode), or DC power by build in battery (DC mode).
AC mode, connect the AC power cable provided to a wall socket.

• The speaker will be powered by AC power and set the power switch on rear panel to ON position.
•  DC mode, the speaker will be powered by the built in rechargeable battery.
• Use the power adaptor ( not in the accessories) to power on the speaker and set the power switch on rear panel to ON position.
•  Use the remote control to turn it into Standby mode, press it again to power it on.

Caution: If you do not use this unit for a while, please switch the “POWER” button to “OFF” status, and disconnect the AC power cable of this unit.

CHARGING THE INTERNAL BATTERY

The speaker comes with a built-in rechargeable battery, follow the below steps to charge it:

1.  Connect the power cable and plug it into the wall socket on the rear panel.
2.  There is a BATTERY indicator light on the rear panel that will light up as RED color, the battery is being charged. When the BATTERY indicator RED color light off, the battery is fully charged, then unplug the power cable to stop charging.

INTERNAL BATTERY LEVEL INDICATOR

1.  There is a battery level indicator on the display, a total is three levels of the battery, which will decrease the level when the battery is running.
2.  When you see there is only 1 level of the battery indicator, please charge the internal battery on time to keep the battery life.
3. 4.  When the speaker sound becomes abnormal, please charge the internal battery on time to keep the battery life.
      Note: please fully charge the product when it is not going to be used for a long time and charge once a month to keep a longer battery life.

BASIC KEY PLAY OPERATIONS

You can control play through the following operations.

CONNECT WITH BLUETOOTH

1.  Press the M/M00E button on the top control panel or on the remote control to switch to the BLUETOOTH CONNECT mode, (bLUE) will be displayed on the screen.
2.  Open the Bluetooth on the external device (must have Bluetooth function), and the name “0518 TLV6” will show on the device, please try to connect it.
3.  Once connected, you can hear a small sound from the speaker.
4.  You can use the I◄◄ or ►H key on the Top Control panel to control the tracks of the external device.
   Note: This speaker do not need the password.

TWS (TRUE WIRELESS STEREO SPEAKERS) INSTRUCTIONS

This party speaker supports TWS connecting function, please buy two same speaker to enjoy this function.

1.  Turn on two party speakers and keep both speakers are on the Bluetooth mode
2.  Open the Bluetooth on your external device (must have Bluetooth function), and there two Bluetooth names of the 0518 TLV6; 0518 TLV6; will show on your external device, please connect any one of them.
3. 4.  Once connected, long press the M button from any one of two speaker, then the TWS will pair automatically from both speaker
4.  When the speakers are at TWS mode, long press the Bluetooth button to disconnect TWS from any one of two speakers. Long press the Bluetooth again can reconnect the TWS.

FM RADIO INSTRUCTIONS

1.  Press M button on the top control pan le or press FM on the remote control to switch to FM mode.
2.  Press SCAN or HI key on the top control panel or on the remote control to search and save the radio stations automatically.
3.  Press NEXT and PREV to select programmed radio stations.

CONNECT WITH AUX LINE IN

1.  Press the M/M00E button on the Top Control panel or on the remote control to switch to the AUX(Line) mode, (LINE) will be displayed on the screen.
2.  Connect this speaker to AUX inserting jack and the external device Earphone jack by provided AUX cable;
3.  Once connected, turn on your external device music
4.  You can use or button on the Top control panel to control the tracks of the external device.
   Caution: Please turn off the unit before connecting the AUX cable in order to avoid unexpected noise.

CONNECT WITH WIRED MICROPHONE/ GUITAR

When playing with the wired microphone/guitar, please press this knob to adjust the sound volume level of the microphone/guitar.

1.  Press this MIC/GT MENU, you can open the volume control of the microphone/guitar, the display will have a corresponding function on the screen, then press volume-/+ to adjust the sound volume level of the microphone/guitar.
2.  Press this MIC/GT MENU, you can open the echo volume control of the microphone, the display will have a corresponding function on the screen, then press volume-/+ to adjust the echo sound volume level of the microphone.
3.  Press this MIC/GT MENU, you can open the treble or bass volume control of the microphone, the display will have a corresponding function on the screen, then press volume-/+ to adjust the treble or bass sound volume level of the microphone.

Important Notes
While using the microphone, avoid being put the microphone opposite the bass of the Speaker.as they may have Whistler Noisy. To get the best singing performance, keep the microphone within 5-15cm of the mouth and at a 45-degree angle. When using the microphone, always pay attention to the battery.
If the battery is low, the indicator light will come on and the performance will progressively become poor.
Caution: Please do not put the microphone directly face to the speaker, it may damage the speaker.

TROUBLESHOOTING

Warning Never remove the casing of this speaker

If you encounter problems when using this speaker, check the following points before requesting service.

No power

•  Ensure that the AC power plug of the speaker is connected properly.
•  Ensure that there is power at the AC outlet.

No sound or poor sound

• Adjust the volume.
•  Disconnect the headphones.
• Check that the speakers are connected correctly.
• Check if the stripped speaker wires are clamped.

No response from the speaker
Disconnect and reconnect the AC power plug, then turn on the speaker again.

The remote control does not work

•  Before you press any function button, first select the correct source with the remote control instead of the main unit.
•  Reduce the distance between the remote control and the unit.
•  Insert the battery with its polarities(+/- signs) aligned as indicated.
•  Replace the battery. Aim the remote control directly at the sensor on the front of the speaker.

SPECIFICATIONS

GENERAL FEATURES|
---|---
System Type| Portable 6.5″ 2-way bass-reflex Loudspeaker
Maximum SPL Output| 105 dB@ 1 Meter
Frequency Range (-1 O dB)| 40Hz- 20kHz
Frequency Response (-3 dB)| 60Hz – 18k Hz
Audio Sources| BT/ USB / FM Tuner/ Aux/ Mic/ Guitar
Connectivity| Bluetooth with TWS (True Wireless Stereo)
Battery type| 12V / 4Ah / 20Hr non-spil lable (6FM4)
Playing tim e| Full power and LED Ligts ON >3.5 hours (results may vary depending of multiple conditions)
Ch arg in g time| From Low Battery< 1 hour (Using AC input) <2 hour (using 12V input)
AMPLIFIER:|
Power Rating| 200W Music Program (Max)/ 50W Continuous (RMS)
Type| Class D
Input Impedance| 20k (balanced)
Input Gain| Guitar :      00    to +6dBu / Mic:           00   to +6dBu / Aux :          00 to +4dBu
Max imum Input Level| Guitar: -20dBu / Mic: -20dBu / Aux: +4dBu
Equ alizer| 4 presets and flat
Connectors| 2 x 1 /4″ inputs: Mic/G uit ar
| 1 x 3.5mm Stereo Jack input
1 x USB
LED In dicators| Rear Red LED (Charging mode). Top Panel Blue Ring (Unit On)
LED Speaker| Front RGB LED with color modes (switchable On/Off)
Coo lin g| Passi ve
AC Power Input| 100-120VAC 50/60 Hz; 230-240VAC 50/60 Hz
DC Input| 12V / 2A

SPEAKER:

|
LF Driver| 1 x 6.5″ woofer with 1″ voice coil, ferrite magnet, paper cone
HF Driver| 2 x 2″ tweeter, Ferrite magnet, Paper Cone, 0.5” Voice Coil
Coverage Pattern| 110 x 110 deggres
Crossover Frequency| 2kHz

ENCLOSURE:

|
M aterial| Polyp ropylene, black
Handles| 1
Grille| Preformed Steel Mesh Grill
Dimensions IL x W x H)| 10.8 ” x 12.8″ x 13.6″ / 275mm x 325mm x 345mm
Weight| 12.5Ib

References

• Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More!
• Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>