havit SK816BT Portable Outdoor Wireless Speaker User Manual
- June 6, 2024
- havit
Table of Contents
SK816BT Portable Outdoor Wireless Speaker
User Manual
Packing list:
Product structure:
1.Power LED indicator | 6.Mode button |
---|---|
2. Power switch | 7.MIC |
3.PREVIOUSNOL- | 8.Type -C charging port |
4.Play/Pause button | 9.Micro SD card port |
5.NEXT/VOL+ | 10.AUX in |
Power ON/OFF
- Long press the power switch for 2 seconds to turn on, the LED indicator flashes blue.
- Long press the power switch for 2 seconds to turn off, the LED status indicator goes off.
Bluetooth connection
- Turn on the Bluetooth speaker, the LED indicator flashes blue continuously while waiting for paring.
- Then active the Bluetooth of your phone and search for “HAVIT SK816BT”. Click manually to connect. If the connection is successful, the LED indicator will turn steady blue.
- Since the speaker can automatically reconnect to the last paired device. When the Bluetooth of your device turns on, (Just turn on the speaker), it will automatically reconnect.
**Answer incoming calls
**
Press the play/pause button to answer incoming calls.
Tip: Since some mobile phones default to answer calls via their own
receiver, please refer to the instructions of your phone and set on your
phone.
One key for voice assistant
Long press the play/pause button to activate the voice assistant.
End the call
Press the play/pause button once to end the current call.
Refuse incoming calls
Long press the play/pause button for 2s to reject when there comes a call.
Last number redial
Dual press the play/pause button to redial the last calling number.
Bluetooth disconnection
Dual press the mode button to cut off the Bluetooth connection.
Mode switching
Short press the mode button to select mode.
(Bluetooth/Micro SD card/AUX-in)
Micro SD card mode
Insert a micro SD card, and short press the mode button the speaker will
automatically broadcast MP3 format music in it. (The Max storage of the micro
SD card is 32GB).
AUX mode
Connect your music player/phone to the speaker via the provided dual 3.5mm
audio cable, and the short press mode button the speaker will recognize.
One key for voice assistant
Long press the play/pause button to activate the voice assistant.
Music playing
- Short press the play/pause button to pause/play;
- Long press the “-“for PREV;
- Long press the “+” for NEXT.
- Short press the”-“for VOL – ;
- Short press the”+” for VOL+.
True Wireless Stereo (TWS) Fit for two SK816BT speakers
You can connect two SK816BT speakers as a pair for a stronger stereo and surrounding effect.
- Make sure the Bluetooth function is OFF on your Bluetooth player;
- Turn on two speakers;
- Long press mode button on either speaker for 8 seconds, then there comes up a melody which means the two speakers are now in TWS pairing status.
- Then active the Bluetooth of your phone and search for “HAVIT SK816BT”. Click manually to connect.
Charging
- As the product has a built-in non-removable and rechargeable battery, please use the provided Type-C cable to charge.
- Please choose the charger that is certified by the regular manufacturer.
- The battery performance may decrease as repeating charging and using the speaker. It’s a normal phenomenon for all rechargeable batteries.
- Charge if the power LED indicator lights up red, and it goes off upon charging finished.
Specification:
IPX6 waterproof
Bluetooth version: V5.0
Rated power: 30W
Peak power: 40W
Battery capacity: 7.4V/2500mAh
Speaker: 75mm
Product size: 300102160mm
Speaker frequency:130HZ-18KHz
Wireless working range: 210M(without obstacles)
Playing Time: about 15H (Medium volume)
Charging time: about 5H
Support: Bluetooth,AUX,Micro SD,TWS
Charge means: Type-C
Warnings:
- Please follow the instruction to operate.
- Please do not use this product in near water. Do not immerse this product in any liquid or splash any liquid on this product.
- Please store or use the product in a normal temperature environment.
- Please keep the product from the heat sources, such as radiators, hot air regulators, stoves, or other heat-generating instruments. As it is not anti-high temperature.
- Don’t jam the ports of the product, such as charger port and microphone, etc.
- In order to protect your hearing and extend the speaker service life, it is not recommended- ed to adjust the volume to the maximum level for a long time.
- If the speaker system is halted, long-press the MFB to reset and power off.
- Whatever reasons damage the product, please feel free to contact our after-sales staff in time rather than repair by yourself.
Otherwise, you will accept without after-sales service.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement. The? the device can be used in portable exposure conditions without restriction
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>