FILOHOME FLM3 Smart Light Switch User Manual
- June 6, 2024
- FILOHOME
Table of Contents
FILOHOME FLM3 Smart Light Switch
ADD A DEVICE
Download “Smart Life” APP
PRODUCT DESCRIPTION
INSTALLATION
Wiring Instructions (Cut off the power before installation)
Using a small screwdriver to separate the upper and lower parts of the switch
- Works with Amazon Alexa and Google Home, commanded by you voice.
- Control you home with your smart phone app or tablets from anywhere al anytime.
- Timing switch to turn ON/OFF your lights and appliances automatically.
- Intelligent sharing can be freely Shared with family members.
- Refined appearance and made of fire-resistant material, Safe and Durable.
- overload prediction, easy to replaces your traditional mechanical switch (Requires a neutral wire)
Enter the register/login interlace, input the phone number for getting verification code to registeror through other methods at the bottom of page connecting to related authorization interiace to log in
Preparation:
- Device has been comected v.tth electricity, Phone has connected to Wi-Fi router and been able to connect to the internet.
- The application already stepped into “My Device” interlace.
- Long press ON/OFF button(anyone) for 5 seconds until indicator (Red)light quickly flashes.
Pairing steps:
- Tap the icon”+’ on the top right corner of “My Device”, choose yourdevicetype.Enter into”l>.ddDevice·.
- Make sure the indicator light is flashing quickly, then tap the related button in application.
- Choose the local W-Fi and enter the corred: password, tap “Next’ Wait for configuring successfully, then tap “Complete·.
Attention: there is no Internet-connected while the blue light flashing slowly.
Products can only be paired on 2.4G-Wifi-Router, don’t accept SG-Wifi-Router. Please set your home Wifi account name and passwords use numeric and letters, don’t use special symbols. Cut off the power before installation.
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.