Optoma OPS PC Module i5 8GB 128GB SSD Installation Guide
- June 6, 2024
- Optoma
Table of Contents
**Optoma OPS PC Module i5 8GB 128GB SSD Installation Guide
**
Product Overview
| Port | Function |
|---|---|
| 1 Type-c | Read data via USB |
| 2 Audio out | Connect to audio output device |
| 3 Audio in | Connect to a sound capture device |
| 4 HDMI | Connect to device with HDMI output |
| 5 USB2.0 | Connect to device with USB ports |
| 6 USB3.0 | Connect to device with USB ports |
| 7 | Power button |
| 8 | Power Indicator |
| 9 | Hard Disk Indicator |
| 10 Network | RJ-45 network port |
| 11 Antenna | Antenna ports |
| 12 pin | Powered by 80pin interface |
Installation Instructions
Step 1 : Remove OPS PC backplane
Step 2: Insert OPS PC into the panel slot
Step 3 : Fix the screws or mounting ears and tighten it
Step 4: Press the power button to turn it on and operate like a regular
computer
- Do not plug or unplug the OPS PC when powered on. Please make sure to plug or unplug the OPS PC after disconnecting the power of the large screen.
- Do not use OPS PC without tightening the screws or missing screws.
- Do not cover the vents of OPS PC with tape, paper, textiles, etc.;
- When using for the first time, if the screen is blurred, flickering, no signal, etc. after booting, OPS PC may not be installed correctly; please check the installation status or reinstall it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>