Wetocke SK-X10 Mini Bluetooth Speaker Instruction Manual
- June 6, 2024
- Wetocke
Table of Contents
Wetocke SK-X10 Mini Bluetooth Speaker Instruction Manual
1.Functlon Introduction
- Stir bar Turn it on/off
- Turn on the vinyl record and rotate
- Switch bluetooth, audio output and SD card with knob
- Rotate the knob to adjust the volume, press once to the next song, press twice roe the previous song, and long press to pause
- SD card slot
- Power on indicator light
- The charging port 8. Audio input port
2.Technlcal Parameters
3. Safety guidelines
Please read the instruction carefully before use and keep it for reference.
- Stay away from heat and open C1te.
- Do not Insert sharp objects and metal into the product to avoid short circuit.
- This product cannot repair by itself, need professional o, return to the factory for, repair.
- If the product overheats or fans Into the liquid, please slop using.
- If consumers use power adapters for oversupply, they shook purchase a matching power adapter that is CCC certified and meals the standard requirements.
4.lnternal battery care
- Charge the product before use and charge it fully before use.
- Do not charge for too long, the general charge 2-3 hours, do not charge too full will affect the cycle of battery use.
- If the product Is not used for a long time, the full charge may be lost.
- Use a standard SV de adapter when charging. Using other types of adapters may damage or damage the product.
- When the speaker Is charged, the indicator light is red and blue when full.
- Charge the battery according to the instruction in the manual.
5.Accessories included
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.