GARO GLBDC-T274 FCPE Domestic Wall mounted Charger GLB non OLEV Instructions
- June 6, 2024
- GARO
Table of Contents
Domestic Wall mounted Charger GLB (non OLEV)
Type: GLBDC-T274 FCPE
GLBDC-T274 FCPE
Charging Mode
Socket or Tethered Lead
AC Output Current (A)
Power outlet [kW] Rated voltage [V AC] Frequency [Hz] Temperature range [C]
Degree of protection (IP)
Weight (KG)
Location
DC Monitoring
PEN Fault Isolation
Load management
Local Meter
Input for timer/low
tariff Wifi Card
RFID
Communication
Certification| Mode 3
Tethered lead, 4.5 Metres (type 11)
6,10,16,20,25,32
3.7KW,7.4KW
230
50
-25…+40
44
3.2
Wall or GLB Stand
Standard
Standard
Yes, with GNM1D-100-rs485
Option, with GNM1D-rs485
Standard, with DV2K timer
Option
Option with Wifi card
Option, with G-Cloud
EN 61851-1, IEC 61439-7
---|---
IET BS:7671:2018
722.411.4 TN system (Amendment 1:2020) (iv) Protection against electric
shock in a single-phase installation is provided by a device which
electrically disconnects the vehicle from the live conductors of the supply
and from protective earth in accordance with Regulation 543.3.3.101(ii) within
5 s in the event of the utilisation voltage at the charging point, between the
line and neutral conductors, being greater than 253 V rms or less than 207 V
rms. The device shall provide isolation and be selected in accordance with
Table 537.4. Equivalent means of functionality could be included within the
charging equipment. Closing or resetting of the device shall be possible only
if the voltage between line and neutral conductors is in the range 207 to 253
V rms.
Document
Declaration of conformity| Edition date: 2015-05-04
---|---
Department Quality
Prepared
Kent Andersson| Version 4| Page 1 av/of 1
Manufacturer: GARO AB, Box 203, S-335 25 GNOSJO, Sweden
Telephone: +46 (0)370 33 28 00
Telefax: +46 (0)370 33 28 50
Agent established within EC
Agent of equipment: Electric Charging Station for EV
Trade Mark: GARO
Type Designation:
GARO Home Charger
GARO Home Charger
GARO Home Charger| _product code: GLB-T222
_product code: GLBDC-T222
_product code: GLB-B-DCM T2-7.4 – 22| WO, B, FC
WO, FC
WO A – R – LAN – MC
---|---|---
We hereby declare that our product fulfils the requirements of following EC directives:
The Low Voltage Directive (LVD) 2014/35/EU
Electromagnetic compatibility (EMC) 2014/30/EU
RoHS Directive (RoHS) 2011/65/EU
No electromagnetic compatibility (EMC 2014/30/EU) immunity or emission tests
are required on the assembly
The following harmonised standards (latest edition) or technical
specifications which comply with good engineering practice in safety matters
in force within the EC have been used in the design:
The equipment confirms completely with the above stated harmonised standards
or technical specifications.
Or
The equipment confirms only partially with the above stated harmonised
standards or technical specifications but complies with good practice in
safety matters in force within the EC.
We have product surveillance according to CENELEC’s harmonised reguirements, documents CCA-201.
2016-05-12
Date
Responsible for Technology and standardization
Position
Kent
Sign in printed letters