GARO DLM250 Dynamic Load Management Kit 250 Amp User Manual
- June 5, 2024
- GARO
Table of Contents
GARO DLM250 Dynamic Load Management Kit 250 Amp User Manual
Meter specifications
- Power: Aux. power supply 90-260v AC/DC
- Consumption: ≤ 1 W, ≤ 8 VA
- Base current: 5A
- Maximum current (continuing): 6A
- Minimum current: 0.05 A
- Start up current: 0.05 A
- Working voltage: 400 V ac,
- Frequency: 50Hz (in case of MID certification) 45-65 Hz
- Accuracy class: Active energy: Class 1 (EN62053-21) / Class B (EN50470-3) Reactive energy: Class 2 (EN62053-23)
Environmental specifications
-
Working temperature: From –25 to +55 °C/from –13 to +131 °F (in case of MID certification)
From –25 to +65 °C/from –13 to +149 °F From –30 to +80 °C/from –22 to +176 °F -
Storage temperature R.H Environment.: From 0 to 90% non-condensing @ 40°C) Intended for Indoor use only.
RS485 Modbus communication port
Current Transformer specification
- Ratio: 250 / 5
- Class: 1
- Width: 93mm
- Height: 106mm
- Depth: 58mm
- Core: 23 x 33mm
Manufacturer/Tillverkare: GARO AB
Box 203
S-335 25 GNOSJO
Sweden
Telephone: +46 (0)370 33 28 00
Telefax: +46 (0)370 33 28 50
Agent established within EC/Ombud etablerad inom EG
Telephone:
Telefax:
Agent of equipment/Materielslag: Energy meter
Trade Mark/Varumarke: GARO
Type Designation/Typbeteckning: GNM.. , DLM…, -MBUS, .. -RS485, GNM3D ..
-MBUS, .. -RS485, GNM3T..,
We hereby declare that our product fulfils the requirements of following EC directives.
- The Low Voltage Directive (LVD) 2014/35/EU / Lag spanning sdirektivet (LVD) 2014/35/EU.
- Electromagnetic compatibility (EMC) 2014/30/EU / Elektromagnetisk kompatibilitet (EMC) 2014/30/EU.
- RoHS Directive (RoHS) 2011/65/EU / RoHS direktivet (RoHS) 2011/65/EU.
- No electromagnetic compatibility (EMC 2014/30/EU) immunity or emission tests are required on the assembly (EMC) 2014/30/EU.
The following harmonised standards (latest edition) or technical specifications which comply with good engineering practice in safety matters in force within the EC have been used in the design: 50470-1, EN 50470-3, the MID-Directive
-
The equipment confirms completely with the above stated harmonised standards or technical specifications.
Or -
The equipment confirms only partially with the above stated harmonised standards or technical specifications but complies with good practice in safety matters in force within the EC.
**We have product surveillance according to CENELEC’s harmonised reguirements, documents CCA-201.
** Responsible for Technology and standardization/Teknik och standard is eringsansvarig Position/Befattning
Kent Andersson
Sign in printed letters/Namnfortydligande
