CASIO CT-S1000V Electronic Keyboard User Guide

CASIO CT-S1000V Electronic Keyboard

For more detailed information about the product and its operation, visit the CASIO website. Available Information: User’s Guide, etc. https://support.casio.com/global/en/emi/manual/CT- S1000V/

Included Accessories

• Music Stand
• Wireless MIDI & audio adaptor
•  Strap Lock (enclosed with music stand)
• Leaflets
  • READ THIS! Sheet
  • Other (Warranty, etc.)
    Items included as accessories are subject to change without notice.

Preparation

Preparing a Power Supply

• Using the AC Adaptor
  Connect the AC adaptor as shown in the illustration on the right.

  • Make sure that you use only the AC adaptor specified for this Digital Keyboard

• Using Batteries
  Load six AA-size batteries.
  

• Specify the battery type.
  See “Configuring Function Settings” on the reverse side of this sheet. Computer, smartphone, etc. (commercially available)

• Connect using a USB cable that is no more than two meters long.

Basic Operation

Playing with a Lyric Tone (Vocal Synthesis)

1. Light the LYRICS LED. This enables Lyric Tone so that the lyrics are advanced and sounded while keyboard keys are pressed.

2. To select Lyric Tone and then use the knobs to change the tone

3. 4. To change how lyric advancement is performed when one or more keyboard keys are pressed
      PHRASE: Lyrics advance while a keyboard key is held down.
      NOTE: Each press of a keyboard key advances one lyric syllable.

4. To change the voice used to sound lyrics (Vocalist)

To use keyboard keys to control Lyric Tone

1. 2. Play your performance on the keyboard in combination with the Lyric Tone controller keyboard.

Playing with an Instrument Tone

1.  Light the INSTRUMENT LED.
2. To select an Instrument Tone

To change the keyboard’s high-range and low-range tones

1. ---

2. 3 Select a tone for the keyboard’s low range.
   To play with two layered tones

3. 4. Select the tone you want to layer.

To play with Touch Response

1. 2. OFF: No Touch Response.
      LIGHT: Louder notes with lighter touch than
      NORMAL.
      NORMAL : Normal Touch Response.
      HEAVY: Louder notes require a heavier touch than NORMAL.

2. To play with sustain

To sound arpeggio phrases automatically

1. 2. Enable the arpeggiator.
2. Select a type.
3. Play single notes and chords.

Selecting a Rhythm for Ensemble Play

1. 2. To select a rhythm

To change the pattern

1. Start the rhythm.

To insert a fill-in

1. Start the rhythm.

To insert an intro

1. 2. Start the rhythm.

To insert an ending

1. Start the rhythm.

To sound the accompaniment pattern with chords

1. 2. Start the rhythm.
2. Use the chord input keyboard to play chords.

To start rhythm play as soon as you play a chord

1. 2. Press the ACCMP button to display AC. Next, play a chord on the chord input keyboard.

Recording Your Performance

Configuring Function Settings

Example: To specify the battery type Alkaline: Alkaline batteries Ni-MH: Rechargeable nickel metal hydride batteries

To initialize a setting
Select “All Initialize”.

Registering and Recalling Performance Setups

To register a setup

To recall a setup

Using Knobs to Change the Tone

• K1 knob: Cut off (initial default)
• K2 knob: Resonance (initial default)
• K3 knob: Modulation (initial default)
• While a Lyric Tone is being used, the knobs are assigned special Lyric Tone settings.

Product Specifications

• Model: CT-S1000V

• Keyboard: 61 keys

• Touch Response: 3 levels, Off

• Maximum Polyphony: 64 notes

• Sound Source: 900 preset tones (including 100 lyric tones)

• Vocal Synthesis: Language (Japanese, English); Vocalist (22 types); User vocalist; Vocalist

• parameters (gender, age, voice); Lyric Tone performance modes (PHRASE mode, NOTE

• mode); Syllable control; Lyric Tone retrigger; Lyric Tone sequence; Up to 150 user lyric tones Effects: Reverb (24 types, Tone, off); Chorus (12 types, Tone); Delay (15 types, Tone);

• Active DSP (100 types, Tone); Equalizer (10 types, User); Surround

• Metronome: Bell sound off, 1 to 16 beats; Tempo Range: 20 to 255

• Auto Accompaniment: 243 preset rhythms, 50 user rhythms, 243 one-touch presets,

• INTRO, ENDING; chord input mode switching

• Registration: Maximum 64 setups (4 setups × 16 banks), Registration sequence, Freeze Demo Function: 2 Demo Songs

• Function Volume Adjustment: Metronome, Rhythm, Song

• MIDI Recorder: Real-time Recording, Playback; Tone recording songs: 1 song, Rhythm

• recording songs: 1 song, Multi-track recording songs: 5 songs, 6 tracks (1 system track,

• 5 solo tracks); Capacity: Approximately 40,000 notes (one song)

• Sampling: 1 sampling melody, 1 sampling drum set, Sampling frequency: 44.1 kHz,

• Sampling channels: stereo, Sampling bits: 16, Loop

• Other Functions: Transpose (±1 octave, –12 to 0 to +12 semitones); Octave Shift (–3 to 0 to +3 octave); Tuning (A4 = 415.5 to 465.9 Hz; Default = 440.0 Hz), 12 Auto Harmonize types; 150 Arpeggiator types; MIDI controller

• Pitch Bend Wheel: 0 to 24 semitones

• Control Knobs: 3, Knob parameter control

• APP Function: iOS, Android supported (connected via the USB terminal)

• MIDI: 16-channel multi-timbre receive; GM Level 1 standard

• Input/Output Terminals: PHONES jack: Stereo mini jack (3.5mm); LINE OUT jack: Standard jack (6.3mm) × 2; AUDIO IN jack: Stereo mini jack (3.5mm) (Input impedance:
  10kΩ, Input sensitivity: 200mV); USB TO HOST port: micro B; USB TO DEVICE port: Type A; PEDAL 1 jack: Standard jack (6.3mm) (pedal sustain, sostenuto, soft, start/stop, fill-in, arpeggiator hold, registration sequence, Lyric Change, Syllable Reset, Lyric Hold): PEDAL 2/EXPRESSION jack: Standard jack (6.3mm) (expression, master volume, balance, tempo)

• Power Jack: 12VDC

• Power Supply: 2-way power supply; Auto Power Off (30-minute trigger time; Can be disabled)

• Batteries: 6 AA-size alkaline batteries or AA-size rechargeable nickel-metal hydride batteries; Approximately 3 hours (alkaline batteries) or approximately 3 hours (nickel metal hydride batteries) continuous operation Measured values while using eneloop batteries. eneloop is a trademark of Panasonic Corporation.

• Actual continuous operation time may be shorter due to battery type, performance type, and usage environment.

• Specifying the wrong battery type can cause incorrect display of the battery level and sudden loss of power. AC Adaptor: AD-A12150LW (JEITA Standard, with unified polarity plug)

• Speakers: 13 cm × 6 cm (oval) × 2 (Output: 2.5W+2.5W)

• Power consumption: 12V = 7.5W

• LCD: Adjustable contrast

• Dimensions: 93.0(W) × 25.8(D) × 9.1(H) cm (36 5/8 × 10 3/16 × 3 9/16 inch) Weight: Approximately 4.7 kg (10.4 lbs) (Excluding batteries)

• Specifications and designs are subject to change without notice.

• Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.

• IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER
  (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

• The contents of this manual are subject to change without notice.

• Company and product names used in this manual may be registered trademarks of others.

Declaration of Conformity

• Model Number: CT-S1000V
• Trade Name: CASIO COMPUTER CO., LTD.
• Responsible party: CASIO AMERICA, INC.
• Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
• Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   A labels rating is affixed to the bottom of the product.

Functions Not Covered in This Manual

These instructions provide general information about main functions. For more detailed information, refer to the “User’s Guide”.
https://support.casio.com/global/en/emi/manual/CT-S1000V/
The “User’s Guide” includes information on the topics listed below.

• Saving a Setup (My Setup)
• Saving and Recalling Setups (Registration)
• Changing the Pitch in Octave Units (Octave Shift)
• Changing the Pitch in Semitone Units (Transpose)
• Changing the Scale (Scale Tuning)
• Playing with a More Expanded Sound (Surround)
• Changing the Volume Balance Between Keyboard Play and Rhythm Play (Balance)
• Making Transitions Between Upper Part Notes Smoother (Upper Portamento)
• Other

References

• CT-S1000V - CASIO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>