Alvoxcon CK-920 Wireless Microphone System User Guide
- October 27, 2023
- Alvoxcon
Table of Contents
Alvoxcon CK-920 Wireless Microphone System
Specifications
- BRAND: Alvoxcon
- MODEL NAME: CK-920
- CONNECTIVITY TECHNOLOGY: Auxiliary
- CONNECTOR TYPE: 5 mm Jack
- COMPATIBLE DEVICES: Camera, Smartphone, Speaker
- COLOR: Dual Mic Gray
- INCLUDED COMPONENTS: amplifier, battery
- POLAR PATTERN: Unidirectional
- ITEM WEIGHT: 73 Kilograms
- MICROPHONE FORM FACTOR: Microphone System
- RANGE:
- ITEM WEIGHT: 61 pounds
- PRODUCT DIMENSIONS: 84 x 2.44 x 9.84 inches
- BATTERIES: 3 Lithium Polymer batteries required
- MATERIAL TYPE: Aluminum, Acrylonitrile Butadiene Styrene
- SIZE: 2 Microphones
- BATTERY TYPE: Lithium Polymer
- HARDWARE PLATFORM: Tablet, Smartphone
- POWER SOURCE: Battery Powered
Introduction
Both the microphone(s) and the receiver include built-in rechargeable lithium batteries that support 4–6 hours of operation and are simple to recharge using a USB power source. Never again will you be irritated by battery replacement. High sensitivity professional built-in Crystal CLEAR SOUND is ensured by a dynamic moving-coil capsule with a working range of up to 80 feet. With a stronger signal and ultra-high fidelity offered by UHF digital wireless technology, Bluetooth or WIFI interference and dropouts are less likely to occur. This wireless solution is enhanced by the supplied cold shoe attachment, which is designed specifically for camera video recording. Best for voice projection, YouTube, Podcast, Vlog video recording, school activities, churches, wedding host parties, outdoor or on-stage performances, and home karaoke. Just take pleasure in your endearing voice with this chic and unique wireless mic.
The two microphones can be used with any audio equipment that has a “MIC IN” input port, including smartphones, DSLR cameras, PA active speakers, DJ controllers, karaoke machines, voice amplifiers, mixers, and more thanks to the 1/4 inch plug cordless receiver and accompanying adapters. The wireless mic system is prepared with 20 selectable frequencies and is cable-free and Plug & Play. (902-928Mhz abides by FCC regulations) It is portable, adaptable, and simple to set up thanks to automatic frequency pairing. This allows it to operate at its peak efficiency while being less prone to interference and low distortion.
HOW TO CONNECT THE RECEIVER
-
WITH PA SPEAKERS: take the Alvoxcon USB and plug it into the speaker’s/amplifier’s/recorder’s microphone port.
-
WITH IPHONE: take the lightening connector and connect its one end with the microphone port of iPhone and the other end with the Alvoxcon USB’s microphone port.
NOTE: it is neither compatible with Android nor MacBook. -
WITH DSLR CAMERA: take the connector that is included in the package and connect its one end with the Alvoxcon USB’s microphone port and the other end with the DSLR camera.
NOTE: it is not compatible with small bluetooth speakers.
HOW TO UNMUTE MICROPHONE
Even when you are not in Circuit or your device is locked, you can mute or unmute your microphone on iOS mobile devices. Simply tap the microphone icon in the active call notification that appears in the notification center and lock screen of your device.
HOW TO TROUBLESHOOT
- Be careful to turn on the microphone.
- Verify the receiver is turned on.
- The microphone’s base should be unscrewed.
- Place the microphone’s base up against the receiver’s front.
- On the receiver’s front, press the Sync button.
- Green ought to now be the Ready signal.
FAQs
Why does the wireless microphone not function?****
Signal blockage is one of the most prevalent issues with wireless networks. Signals can be impacted by metal, walls, and even the human body. You can only shift your receivers around to find a nice position that isn’t blocked if there isn’t much you can do about signal blockage.
Why does my phone’s external microphone not function?****
If everything is in order, your apps are the problem. By heading to Settings -> Apps -> App permissions -> Microphone permissions, you can see which apps are accessing the microphone. You could try to check each app individually, but it could take some time.
Why does a wireless microphone suddenly stop working?****
Numerous factors, such as antenna positioning, subpar antenna cables, issues with antenna distribution, frequency selection, interference, etc., can result in dropouts in wireless microphones. Dropout problems will be solved by trial and error.
Can any receiver be used with a wireless microphone?****
No, as wireless microphones may employ incompatible frequencies, exclusive noise reduction circuits, and safe 128- or 256-bit encryption, they will NOT function with any receiver. However, a wireless microphone can be used with a variety of receivers from the same manufacturer’s compatible model line.
What does a wireless microphone system require?****
A microphone, a transmitter, and a receiver are required. A microphone, a transmitter, and a receiver make up the three discrete parts of a working wireless microphone system. Simply put, a microphone is the device through which a user talks or sings.
How are speakers connected to wireless microphones?****
The linked transmitter receives an audio signal from the wireless microphone. This audio signal is wirelessly sent by the transmitter using radio waves. These audio signals and radio waves are tuned to the receiver. An XLR cable is used by the receiver to output the balanced audio stream.
What are the settings for my microphone?****
Settings. Click on Site Settings. Tap the camera or microphone. Tap to activate or deactivate the microphone or camera.
How can I tell if my microphone is off?****
Whether your microphone isn’t visible, click the Manage sound devices link, navigate to the bottom of the page, and check to see if it’s listed under Disabled. If so, click it and select Enable to restore its functionality. When your microphone is chosen, a field labelled “Test your microphone” ought to appear underneath it.
Can I connect a microphone to my speakers directly?****
Yes, you can connect a microphone to a speaker directly as long as the speaker is powered and capable of receiving mic-level signals.
Are speakers required for a wireless microphone?****
A microphone can be used without any speakers, headphones, or other playback devices.
The value of wireless microphones****
A wireless mic will be more useful and costlier if you must move around a lot throughout the recording. Even if you have a microphone with a lengthy cord, it will probably get in the way as you walk around, or you might trip over the cord and need to restart the recording since you pulled the cord away from the power source.
Can many wireless mics be used simultaneously?****
One active microphone transmitter at a time can only have its signal demodulated by a wireless receiver. However, as long as only one transmitter is used, you may choose between the two.
Are wireless microphones affected by cell phones?****
Both yes and no, but mainly no Wireless microphones using the 2.4 GHz band, which are less prevalent than the industry standard UHF mics, can and can interfere with WIFI devices, including WIFI-capable smartphones.
What is the range of a wireless microphone?****
The typical range for systems of the kind detailed here (10-50 mW, VHF or UHF) can range from 100 feet to 1000 feet.
Can you use various brand receivers with various brand mics?****
Blend away! No issue! Making a system out of the top performers across many manufacturers can frequently increase performance and dependability.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>